Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. Kan et al., “Bunch Length Measurement using Coherent Cherenkov Radiation”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD30, pp. 368-370.
[n] A. Pisent, M. Comunian, E. Fagotti, F. Grespan, A. Palmieri, and C. Roncolato, “Completion of the Fabrication of TRASCO RFQ”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP057, pp. 536-538.
[n] V. C. Kempson, “Diamond Light Source: Moving from Commissioning to Full Machine Operation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC030, pp. 2052-2054.
[n] G. Massaro et al., “Inspection and Repair Techniques for the EXFEL Superconducting 1.3 GHz Cavities at Ettore Zanon S.p.A: Methods and Results”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB094, pp. 368-372.
[n] P. Bosland et al., “Tests at High RF Power of the ESS Medium Beta Cryomodule Demonstrator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1940-1943. doi:10.18429/JACoW-IPAC2019-TUPTS006
[n] F.-Y. Lin et al., “Measurement of Accelerator Lattice Magnet Prototypes for TPS Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB020, pp. 319-321.
[n] C. Bruni et al., “High Level Control Command for ThomX Transfer Line”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 830-832. doi:10.18429/JACoW-IPAC2016-MOPOW051
[n] P. Bertrand, “IMPROVEMENT OF THE MASS SEPARATION POWER OF A CYCLOTRON BY USING THE VERTICAL SELECTION METHOD”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20C6, pp. XX-XX.
[n] T. Olsson, S. C. Leemann, and P. Lilja, “Bunch Length Measurements with Passive Harmonic Cavities for Non-uniform Fill Patterns in a 100 MHz RF System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2918-2921. doi:10.18429/JACoW-IPAC2016-WEPOW037
[n] Y. Han, “The low charge linac injector for the SAPS”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPG32, unpublished.
[n] R. Erickson, C. W. Allen, S. Anderson, W. Linebarger, and M. Stanek, “SLAC Accelerator Operations Report: 1995-1997”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W014, pp. 596-598.
[n] M. E. Busse-Grawitz, P. Marchand, and W. Tron, “RF System for the SLS Booster and Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP137, pp. 986-988.
[n] T. B. Tunningley et al., “High Voltage Upgrade of the 14UD Tandem Accelerator”, in Proc. HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, pp. 1-5. doi:10.18429/JACoW-HIAT2022-MO1C3
[n] T. Olsson, R. Bartolini, and I. P. S. Martin, “Harmonic Cavity Design Choice for Lifetime Increase in Diamond-II”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1585-1588. doi:10.18429/JACoW-IPAC2019-TUPGW078
[n] G. Dugan and D. Sagan, “Synrad3D Photon Propagation and Scattering Simulation”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper PST08, pp. 118-122.
[n] V. Kapin, D. Johnson, C. Bhat, D. Georgobiani, and V. Sidorov, “A novel two stage collimation unit for Fermilab booster”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1742-1745. doi:10.18429/JACoW-IPAC2024-TUPS40
[n] S. Assadi and J. Stovall, “A Technique to Transversely Match High Intensity Linac Using Only RMS Beam Size from Wire-Scanners”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO422, pp. 88-90.
[n] P. Frigola et al., “Advance Additive Manufacturing Method for SRF Cavities of Various Geometries”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB042, pp. 1181-1184.
[n] O. A. Nezhevenko and V. P. Yakovlev, “Traveling-Wave Accelerating Test Structure at 34.3 Ghz”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA49, pp. 3492-3494.
[n] P. Chen et al., “Design of a 4.6-Cell RF Gun for the PHIL accelerator at LAL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3922-3924. doi:10.18429/JACoW-IPAC2016-THPOW001
[n] C. Steier et al., “Accelerator Physics Challenges of the FS-Slicing Upgrade at the ALS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WOAB006, pp. 397-399.
[n] I. Hofmann, D. Boehne, K. Beckert, A. Jahnke, and R. W. Mueller, “Improvements on the HIBALL Heavy Ion Fusion Driver”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3070-3073.
For LaTeX
Use Complete Form
For BibTeX
References
- K. Kan et al., “Bunch Length Measurement using Coherent Cherenkov Radiation”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD30, pp. 368-370.
- A. Pisent, M. Comunian, E. Fagotti, F. Grespan, A. Palmieri, and C. Roncolato, “Completion of the Fabrication of TRASCO RFQ”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TUP057, pp. 536-538.
- V. C. Kempson, “Diamond Light Source: Moving from Commissioning to Full Machine Operation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC030, pp. 2052-2054.
- G. Massaro et al., “Inspection and Repair Techniques for the EXFEL Superconducting 1.3 GHz Cavities at Ettore Zanon S.p.A: Methods and Results”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB094, pp. 368-372.
- P. Bosland et al., “Tests at High RF Power of the ESS Medium Beta Cryomodule Demonstrator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1940-1943.
- F.-Y. Lin et al., “Measurement of Accelerator Lattice Magnet Prototypes for TPS Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB020, pp. 319-321.
- C. Bruni et al., “High Level Control Command for ThomX Transfer Line”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 830-832.
- P. Bertrand, “IMPROVEMENT OF THE MASS SEPARATION POWER OF A CYCLOTRON BY USING THE VERTICAL SELECTION METHOD”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 20C6, pp. XX-XX.
- T. Olsson, S. C. Leemann, and P. Lilja, “Bunch Length Measurements with Passive Harmonic Cavities for Non-uniform Fill Patterns in a 100 MHz RF System”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2918-2921.
- Y. Han, “The low charge linac injector for the SAPS”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG32, unpublished.
- R. Erickson, C. W. Allen, S. Anderson, W. Linebarger, and M. Stanek, “SLAC Accelerator Operations Report: 1995-1997”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2W014, pp. 596-598.
- M. E. Busse-Grawitz, P. Marchand, and W. Tron, “RF System for the SLS Booster and Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP137, pp. 986-988.
- T. B. Tunningley et al., “High Voltage Upgrade of the 14UD Tandem Accelerator”, in Proc. 15th International Conference on Heavy Ion Accelerator Technology (HIAT'22), Darmstadt, Germany, Jun.-Jul. 2022, pp. 1-5.
- T. Olsson, R. Bartolini, and I. P. S. Martin, “Harmonic Cavity Design Choice for Lifetime Increase in Diamond-II”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1585-1588.
- G. Dugan and D. Sagan, “Synrad3D Photon Propagation and Scattering Simulation”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper PST08, pp. 118-122.
- V. Kapin, D. Johnson, C. Bhat, D. Georgobiani, and V. Sidorov, “A novel two stage collimation unit for Fermilab booster”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS40, pp. 1742-1745.
- S. Assadi and J. Stovall, “A Technique to Transversely Match High Intensity Linac Using Only RMS Beam Size from Wire-Scanners”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO422, pp. 88-90.
- P. Frigola et al., “Advance Additive Manufacturing Method for SRF Cavities of Various Geometries”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB042, pp. 1181-1184.
- O. A. Nezhevenko and V. P. Yakovlev, “Traveling-Wave Accelerating Test Structure at 34.3 Ghz”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA49, pp. 3492-3494.
- P. Chen et al., “Design of a 4.6-Cell RF Gun for the PHIL accelerator at LAL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3922-3924.
- C. Steier et al., “Accelerator Physics Challenges of the FS-Slicing Upgrade at the ALS”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WOAB006, pp. 397-399.
- I. Hofmann, D. Boehne, K. Beckert, A. Jahnke, and R. W. Mueller, “Improvements on the HIBALL Heavy Ion Fusion Driver”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3070-3073.
Back to search
