JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	Ya. V. Getmanov, O. A. Shevchenko, and N. Vinokurov, “Longitudinal Stability of Multiturn ERL with Split Accelerating Structure”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper WG207, pp. 44-49. 
[n]	A. D. Kovalenko et al., “The NICA Facility in Polarized Proton Operation Mode”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ004, pp. 1804-1806. 
[n]	P. Duval, M. Lomperski, and J. Bobnar, “TINE Studio, Making Life Easy for Administrators, Operators and Developers”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1017-1020. doi:10.18429/JACoW-ICALEPCS2015-WEPGF133
[n]	M. Iwasaki et al., “Design and Status of the SuperKEKB Accelerator Control Network System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC009, pp. 1107-1110. 
[n]	G. B. Christian et al., “Latest Performance Results from the FONT5 Intra-train Position and Angle Feedback System at ATF2”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO017, pp. 520-522. 
[n]	A. Abrami, M. De Marco, M. Lonza, and D. Vittor, “YAMS: a Stepper Motor Controller for the FERMI@Elettra Free Electron Laser”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN034, pp. 958-960. 
[n]	J. H. Shao et al., “Experiment of High Resolution Field Emission Imaging in an rf Photocathode Gun”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1772-1774. doi:10.18429/JACoW-IPAC2016-TUPOW015
[n]	M. Kokole, B. Diviacco, T. Milharcic, M. Zambelli, G. Soregaroli, and M. Tedeschi, “Magnetic Characterization of FEL-2 Undulators for the FERMI@Elettra Free-electron Laser”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC170, pp. 3296-3298. 
[n]	G. Lanfranco, M. J. Conlon, N. Gazis, E. Tanke, and E. Vaena, “Constructing the ESS Linear Accelerator: Pragmatic Approaches to Design and System Integration at the European Spallation Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2131-2133. doi:10.18429/JACoW-IPAC2014-WEPRO076
[n]	E. Cruz Alaniz, D. Newton, and R. Tomas, “Tracking Studies in the LHeC Lattice”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 502-505. doi:10.18429/JACoW-IPAC2015-MOPJE079
[n]	R. B. Nussbaumer et al., “ARIEL Control System at TRIUMF - Status Update”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 460-463. doi:10.18429/JACoW-ICALEPCS2015-MOPGF160
[n]	M. Dal Forno, A. Jensen, R. D. Ruth, and S. G. Tantawi, “Design of Novel RF Sources to Reduce the Beam Pace-Charge Effects”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP123, pp. 712-714. 
[n]	F. Borgnolutti, A. Mailfert, and E. Todesco, “Scaling Laws for Magnetic Energy in Superconducting Quadrupoles”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD005, pp. 2407-2409. 
[n]	R. Kazimi et al., “Observation and Mitigation of Multipass BBU in CEBAF”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP087, pp. 2722-2724. 
[n]	M. Aiba and M. B?Âge, “Beam-based Alignment of an X-FEL Undulator Section Utilizing Corrector Pattern”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD27, pp. 293-296. 
[n]	D. L. Bruhwiler, J. R. Cary, D. A. Dimitrov, E. Esarey, and W. P. Leemans, “Simulation of Ionization Effects for High-Density Positron Drivers in Future Plasma Wakefield Experiments”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FOAB012, pp. 734-736. 
[n]	T. Kubo, “Magnetic Fields in Bulk, Film, and Multilayer Superconductors in Front of a Multi-turn Coil”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2164-2166. doi:10.18429/JACoW-IPAC2016-WEPMB019
[n]	N. S. Kremnev et al., “Adjusting Unit of Longitudinal Field Coils for NICA HV Electron CoolerÔÇÖs Solenoid”, in Proc. COOL'19, Novosibirsk, Russia, Sep. 2019, pp. 127-128. doi:10.18429/JACoW-COOL2019-TUPS21
[n]	D. T. Abell, G. I. Bell, E. Forest, A. G. Ruggiero, A. V. Sobol, and D. Trbojevic, “Space-Charge Simulations of Non-Scaling FFAGs Using PTC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU2PBC01, pp. 673-673. 
[n]	I. P. S. Martin, M. Apollonio, and R. Bartolini, “Injection Studies for the Diamond Storage Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1768-1771. doi:10.18429/JACoW-IPAC2015-TUPJE061
[n]	T. Ogitsu, N. Ohuchi, T. Ozaki, R. Sugahara, N. Toge, and K. Tsuchiya, “Final-focus Superconducting Magnet System for the Interaction Region of KEKB”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP19G, pp. 2038-2040. 
[n]	V. B. Reva, M. I. Bryzgunov, V. M. Panasyuk, and V. V. Parkhomchuk, “High Energy Electron Cooling”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO3A01, pp. 363-367. 
[n]	F. Marteau et al., “The 65 mm Period Electromagnetic/Permanent Magnets Helical Undulator at SOLEIL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC151, pp. 3239-3241. 
[n]	T. Wu et al., “Design of Stripline BPM for the SHINE Project”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2605-2607. doi:10.18429/JACoW-IPAC2019-WEPGW057
[n]	M. Reiser, “Experiments on Resitive-Wall Instability in Space-Charge Dominated Electron Beams with Localized Space-Charge Waves”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP34, pp. 408-410. 
[n]	K. Yonehara, M. A. Cummings, R. P. Johnson, G. M. Kazakevich, and A. Moretti, “Radiation Robust RF Gas Beam Detector R&D for Intensity Frontier Experiments”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2770-2772. doi:10.18429/JACoW-IPAC2019-WEPGW115
[n]	J. Shi et al., “New Quantity Describing the Pulse Shape Dependence of the High Gradient Limit in Single Cell Standing-Wave Accelerating Structures”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3878-3880. doi:10.18429/JACoW-IPAC2016-THPOR042
[n]	C. De Martinis and A. Ferrari, “High Voltage Experiments for the Electrostatic Deflector of the Milan Superconducting Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I6-04, pp. 480-483. 
[n]	H. Danared et al., “Layout of the ESS Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS059, pp. 2631-2633. 
[n]	N. Baboi, R. Brinkmann, H. Chen, M. Liepe, and J. Sekutowicz, “HOM Damping Requirements for the TESLA Superstructures”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP3B05, pp. 2016-2018. 
[n]	L. Froehlich et al., “High Level Software for the Commissioning of the European XFEL”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 110-113. doi:10.18429/JACoW-PCAPAC2016-THPOPRPO13
[n]	D. Yu and A. V. Smirnov, “Analytical and Time-Domain Computations of Single-Bunch Loss-Factor in a Planar Structure”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB075, pp. 3171-3173. 
[n]	O. Marcouillé et al., “Review of Insertion Device Dedicated to HIgh Energy Photons at SOLEIL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC150, pp. 3236-3238. 
[n]	Y. Torun, “Using Cerenkov Light to Detect Field Emission in Superconducting Cavities”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP028, pp. 2052-2054. 
[n]	S. Y. Kim and M. Chung, “Development of RF System for Measuring Plasma Density Modulation of Proton Beam-driven Plasma Wakefield”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2582-2584. doi:10.18429/JACoW-IPAC2016-WEPMY016
[n]	R. E. Laxdal et al., “The 30MeV Stage of the ARIEL e-linac”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 6-12. doi:10.18429/JACoW-SRF2017-MOXA03
[n]	J. T. Rogers et al., “Operation of a Fast Digital Transverse Feedback System in CESR”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAE14, pp. 2426-2428. 
[n]	J. A. Crittenden et al., “Time-resolved Shielded-Pickup Measurements and Modeling of Beam Conditioning Effects on Electron Cloud Buildup at CesrTA”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR064, pp. 1966-1968. 
[n]	X. W. Wu, H. B. Chen, J. Shi, T. Higo, S. Matsumoto, and W. Wuensch, “High Gradient Properties of a CLIC Prototype Accelerating Structure made by Tsinghua University”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3874-3877. doi:10.18429/JACoW-IPAC2016-THPOR041
[n]	S. D. R?ñdel, A. Jankowiak, and A. Meseck, “Investigation of Microbunching-instability in BERLinPro”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1662-1664. doi:10.18429/JACoW-IPAC2014-TUPRI044
[n]	I. B. Barsukov, I. V. Chuvilo, V. V. Kushin, and S. V. Plotnikov, “Project of the Industrial Heavy Ion Linac for Particle Track Membranes (PTM) Production (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-18, pp. 740-742. 
[n]	A. U. Luccio and A. Lehrach, “Spin Flip of Deuterons in COSY - Spink Tracking”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC060, pp. 3122-3124. 
[n]	S. De Santis et al., “Injection/Extraction Kicker for the ALS-U Project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1977-1979. doi:10.18429/JACoW-IPAC2014-WEPRO016
[n]	A. E. Levichev, Y. D. Chernousov, V. Ivannikov, V. M. Pavlov, and I. V. Shebolaev, “Prototype of Parallel Coupled Accelerating Structure”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP093, pp. 2737-2739. 
[n]	A. Dolinskii et al., “Beam Orbit and Power Converter Stability at the CR”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC055, pp. 2139-2141. 
[n]	R. D. Ruth, “Emittance Control in Linear Colliders”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2037-2042. 
[n]	S. Sasaki, “Overview of Quasi-Periodic Undulators”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP071, pp. 2426-2428. 
[n]	C. H. Chang, T. C. Fan, C. S. Hwang, G. H. Luo, and Ch. Wang, “Design of a Revolving Helical Staggered Undulator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG014, pp. 1041-1043. 
[n]	P. Yu. Shatunov et al., “Magnet Structure of the VEPP-2000 Electron-positron Collider”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS040, pp. 628-630. 
[n]	Q. Luo, Q. K. Jia, B. G. Sun, and Z. R. Zhou, “Design of Cavity Beam Monitor at HLS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC111, pp. 1278-1280. 
[n]	F. Zimmermann, G. Arduini, A. Faus-Golfe, N. Iida, and R. Tomas, “2002 Nonlinear Optics Measurements and Modelling for the CERN SPS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB084, pp. 2240-2242. 
[n]	Y.-S. Cheng, J. Chen, P. C. Chiu, K. T. Hsu, C. Y. Liao, and C. Y. Wu, “Power Supply Control and Applications Development for the TPS Storage Ring Quadrupole and Sextupole Magnet”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA050, pp. 3258-3260. 
[n]	J. Kewisch and X. Chang, “Low Emittance Electron Beams for the RHIC Electron Cooler”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS087, pp. 3187-3189. 
[n]	M.-E. Couprie et al., “The Status of LUNEX5 Project”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP087, pp. 574-579. 
[n]	A. Faus-Golfe, “Feasibility Study For A High-Beta Insertion Optics in the LHC for the TOTEM Experiment”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP07D, pp. 338-340. 
[n]	Y. Morikawa et al., “New Industrial Application Beamline for the cERL in KEK”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3475-3477. doi:10.18429/JACoW-IPAC2019-THPMP012
[n]	Yu. I. Golubenko et al., “DC HIGH POWER ELV ACCELERATORS FOR INDUSTRIAL AND RESEARCH APPLICATION”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper FRJI06, pp. XX-XX. 
[n]	J. Q. Qiu et al., “Multipactor Discharge in a Resonator as an Active Switch for RF Pulse Compression”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3640-3642. doi:10.18429/JACoW-IPAC2016-THPMW040

For LaTeX

Use Complete Form

For BibTeX

References

Back to search