Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. A. Welton and T. Nichols, “Orbit Dynamics in Isochronous Cyclotrons”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2480-2483.
[n] G. D'Auria et al., “Linac Upgrading Program for the Fermi Project : Status and Perspectives”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN029, pp. 977-979.
[n] S. A. Kheifets and S. A. Heifets, “Radiation of a Charge in a Perfectly Conducting Cylindrical Pipe with a Jump in its Cross Section”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-24, pp. 493-495.
[n] B. Bradu, K. Brodzinski, G. Ferlin, and V. Gahier, “LHC low beta quadrupole magnets: cryogenic refrigeration capacity and improved controls for luminosity optimization”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3791-3793. doi:10.18429/JACoW-IPAC2023-WEPM094
[n] A. Denker et al., “Status Of Isl: Converting A Multi-Purpose Accelerator To A Dedicated Proton Therapy Facility”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 116-118.
[n] A. A. Kondakov, S. A. Krutikhin, G. Ya. Kurkin, S. V. Motygin, and A. M. Pilan, “RF SYSTEM FOR THE INDUSTRIAL LINEAR ELECTRON ACCELERATOR AT KAERI (DAEJEON, KOREA)”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUGP07, pp. XX-XX.
[n] A. E. Vlieks et al., “Development of An X-Band Photoinjector at SLAC”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO453, pp. 163-165.
[n] R. Byrns and M. A. Green, “The ESCAR Helium Refrigeration System”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1168-1172.
[n] G. Bellomo, L. Serafini, and F. G. Resmini, “Design of the Axial Injection Optics for the Milan Superconducting Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B37, pp. 150-153.
[n] W. M. Fawley, G. J. Caporaso, M. R. Teague, S. S. Yu, and A. M. Sessler, “Novel Accelerators Employing High-Current Electron Beams: Numerical Simulations”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-30, pp. 112-115.
[n] M. P. Pretelli, F. Burini, G. T. Taddia, S. M. Tenconi, A. Lampasi, and P. Zito, “Switching Network Units for High Currents and Voltages or Plasma Applications”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 603-605. doi:10.18429/JACoW-RUPAC2016-THPSC028
[n] F. Gerigk, M. Aiba, C. Carli, S. M. Cousineau, and M. Martini, “Simulation of the CERN PS Booster Performance with 160 MeV H- Injection from Linac4”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN093, pp. 1595-1597.
[n] E. Nanni, “The Cool Copper Collider (C3) concept for a Higgs factory”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEZG2, unpublished.
[n] C. Ronsivalle, C. R. Frascati, M. Ferrario, M. Migliorati, C. Vaccarezza, and M. Venturini, “Microbunching Studies for SPARX Photoinjector”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP062, pp. 506-508.
[n] H. Ishizuka, A. Fisher, G. Leslie, B. Mandelbaum, and N. Rostoker, “Injection and Capture of Electrons in the UCI Stellatron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2727-2730.
[n] J. W. Lewellen and J. Noonan, “Planar-Focusing Cathodes”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP058, pp. XX-XX.
[n] R. J. Steinhagen et al., “Commissioning and Initial Performance of the LHC Beam Based Feedback Systems”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB041, pp. 2779-2781.
[n] G. P. Lawrence, “Critical Design Issues of High Intensity Proton Linacs”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 236-241.
[n] L. Hajdu et al., “Image processing with ML for automated tuning of the NASA Space Radiation Laboratory beam line”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1008-1012. doi:10.18429/JACoW-ICALEPCS2025-WEMR009
[n] V. G. Dudnikov, R. J. Abrams, and M. A. Cummings, “Mirascope Residual-Gas Luminescent Beam Profile Monitors”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2291-2294. doi:10.18429/JACoW-IPAC2018-WEPAL051
[n] M. Kesselman, C. Dawson, and G. Smith, “Beam Current Monitor Calibrator for the Spallation Neutron Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB020, pp. 2453-2454.
For LaTeX
Use Complete Form
For BibTeX
References
- T. A. Welton and T. Nichols, “Orbit Dynamics in Isochronous Cyclotrons”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2480-2483.
- G. D'Auria et al., “Linac Upgrading Program for the Fermi Project : Status and Perspectives”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN029, pp. 977-979.
- S. A. Kheifets and S. A. Heifets, “Radiation of a Charge in a Perfectly Conducting Cylindrical Pipe with a Jump in its Cross Section”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-24, pp. 493-495.
- B. Bradu, K. Brodzinski, G. Ferlin, and V. Gahier, “LHC low beta quadrupole magnets: cryogenic refrigeration capacity and improved controls for luminosity optimization”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM094, pp. 3791-3793.
- A. Denker et al., “Status Of Isl: Converting A Multi-Purpose Accelerator To A Dedicated Proton Therapy Facility”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 116-118.
- A. A. Kondakov, S. A. Krutikhin, G. Ya. Kurkin, S. V. Motygin, and A. M. Pilan, “RF SYSTEM FOR THE INDUSTRIAL LINEAR ELECTRON ACCELERATOR AT KAERI (DAEJEON, KOREA)”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUGP07, pp. XX-XX.
- A. E. Vlieks et al., “Development of An X-Band Photoinjector at SLAC”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO453, pp. 163-165.
- R. Byrns and M. A. Green, “The ESCAR Helium Refrigeration System”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1168-1172.
- G. Bellomo, L. Serafini, and F. G. Resmini, “Design of the Axial Injection Optics for the Milan Superconducting Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B37, pp. 150-153.
- W. M. Fawley, G. J. Caporaso, M. R. Teague, S. S. Yu, and A. M. Sessler, “Novel Accelerators Employing High-Current Electron Beams: Numerical Simulations”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-30, pp. 112-115.
- M. P. Pretelli, F. Burini, G. T. Taddia, S. M. Tenconi, A. Lampasi, and P. Zito, “Switching Network Units for High Currents and Voltages or Plasma Applications”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 603-605.
- F. Gerigk, M. Aiba, C. Carli, S. M. Cousineau, and M. Martini, “Simulation of the CERN PS Booster Performance with 160 MeV H- Injection from Linac4”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN093, pp. 1595-1597.
- E. Nanni, “The Cool Copper Collider (C3) concept for a Higgs factory”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEZG2, unpublished.
- C. Ronsivalle, C. R. Frascati, M. Ferrario, M. Migliorati, C. Vaccarezza, and M. Venturini, “Microbunching Studies for SPARX Photoinjector”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP062, pp. 506-508.
- H. Ishizuka, A. Fisher, G. Leslie, B. Mandelbaum, and N. Rostoker, “Injection and Capture of Electrons in the UCI Stellatron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2727-2730.
- J. W. Lewellen and J. Noonan, “Planar-Focusing Cathodes”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP058, pp. XX-XX.
- R. J. Steinhagen et al., “Commissioning and Initial Performance of the LHC Beam Based Feedback Systems”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB041, pp. 2779-2781.
- G. P. Lawrence, “Critical Design Issues of High Intensity Proton Linacs”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 236-241.
- L. Hajdu et al., “Image processing with ML for automated tuning of the NASA Space Radiation Laboratory beam line”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1008-1012.
- V. G. Dudnikov, R. J. Abrams, and M. A. Cummings, “Mirascope Residual-Gas Luminescent Beam Profile Monitors”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2291-2294.
- M. Kesselman, C. Dawson, and G. Smith, “Beam Current Monitor Calibrator for the Spallation Neutron Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB020, pp. 2453-2454.
Back to search