Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Novokhatski and M. Zobov, “Longitudinal Beam Stability in the Super B-Factory”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP085, pp. 4737-4739.
[n] S. B. Vorozhtsov, B. I. Zamolodchikov, and N. L. Zaplatin, “The Magnetic System of the Monoenergetic Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69D19, pp. XX-XX.
[n] S. Yamaguchi, “Design of Input and Output Couplers for Linear Accelerator Structures”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP11, pp. 346-348.
[n] T. W. Koeth, B. L. Beaudoin, S. Bernal, I. Haber, R. A. Kishek, and P. G. O, “Bunch-End Interpenetration During Evolution to Longitudinal Uniformity in a Space-Charge-Dominated Storage Ring”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOOBS3, pp. 22-26.
[n] D. Gu et al., “Beam-based Alignment Simulation on Flash-I Undulator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO030, pp. 1940-1942.
[n] R. Calaga et al., “Beam Losses Due to Abrupt Crab Cavity Failures in the LHC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOODN4, pp. 76-78.
[n] X. Zhou, T. Natsui, Y. Ogawa, and M. Yoshida, “Ytterbium Fiber Laser System of DAW RF Gun for SuperKEKB”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD056, pp. 2648-2650.
[n] K. R. Shin, A. E. Fathy, and Y. W. Kang, “Double-Gap Rebuncher Cavity Design of SNS MEBT”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP069, pp. 3898-3900.
[n] M. Kase, Y. Oikawa, M. Saito, I. Takeshita, Y. Yano, and I. Yokoyama, “Beam Diagnostic Equipments for RIKEN Ring Cyclotron and Its Beam Lines”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I5-01, pp. 443-446.
[n] G. Lambert et al., “Seeding the FEL of the SCSS Test Accelerator with the 5th Harmonic of a Ti: Sa Laser Produced in Gases”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC018, pp. 109-111.
[n] T. Goetsch, J. Feikes, M. Ries, G. Wuestefeld, and A.-S. Mueller, “Lifetime Studies at Metrology Light Source and ANKA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA012, pp. 88-90.
[n] V. L. Smirnov and S. B. Vorozhtsov, “A Cyclotron Complex for Acceleration of Carbon Ions”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 467-470. doi:10.18429/JACoW-RUPAC2016-WEPSB046
[n] P. O. Schmid, D. B. Engel, J. Feikes, M. Ries, and G. Wuestefeld, “Mitigating the Pertubations Caused by U 180 at the Metrology Light Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC012, pp. 2930-2932.
[n] A. Semenov et al., “Schottky Diode Detectors for Monitoring Coherent THz Synchrotron Radiation Pulses”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3465-3467. doi:10.18429/JACoW-IPAC2014-THPME097
[n] S. W. Lee, M. S. Champion, and Y. W. Kang, “Study of Pretuning and High Power Test of DTL Iris Waveguide Couplers Using a Single Cell Cavity”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 522-524. doi:10.18429/JACoW-IPAC2016-MOPMY005
[n] J. N. Corlett and R. O. Hettel, “Performance Requirements and Metrics for Future X-Ray Sources”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP038, pp. 1177-1179.
[n] F. Sannibale et al., “Status of the APEX Project at LBNL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEEPPB004, pp. 2173-2175.
[n] P. J. Giansiracusa, M. J. Boland, M. P. Lafky, T. G. Lucas, R. P. Rassool, and M. Volpi, “The Effect of the SLED Installation on Extracted and Lost Beam at the Australian Synchrotron Linac.”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2794-2797. doi:10.18429/JACoW-IPAC2019-WEPRB001
[n] G. M. Kazakevich et al., “A Two-stage Injection-locked Magnetron for Accelerators with Superconducting Cavities”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC059, pp. 2348-2350.
[n] S. Chen, N. Nakamura, M. Shimada, D. Zhou, S. Huang, and K. X. Liu, “Transverse Multi-Pass Beam Breakup Simulation for KEK ERL Light Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 248-250. doi:10.18429/JACoW-IPAC2015-MOPWA056
[n] A. K. Krasnykh, “Overview of Driver Technologies for Nanosecond TEM Kickers”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3645-3647. doi:10.18429/JACoW-IPAC2016-THPMW042
[n] T. Hattori, A. Kitagawa, M. Muramatsu, and N. Hayashizaki, “Relationship of Performance and RF Resonance Modes”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper WEPP02, pp. 121-124.
[n] T. Shintake et al., “C-Band RF-System Development for e+e- Linear Collider”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D029, pp. 154-156.
[n] D. A. Shkitov, A. Potylitsyn, A. S. Aryshev, and J. Urakawa, “Double Diffraction Radiation Target Interferometry for Micro-train Beam Diagnostics”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3635-3637. doi:10.18429/JACoW-IPAC2014-THPME159
[n] S. Michizono, S. Anami, M. Kawamura, S. Yamaguchi, and T. Kobayashi, “Digital RF Control System for 400-MeV Proton Linac of JAERI/KEK Joint Project”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO462, pp. 184-186.
[n] M.-H. Wang, Y. Cai, R. O. Hettel, and Y. Nosochkov, “Reduction of Beam Emittance of PEP-X Using Quadruple Bend Achromat Cell”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP018, pp. 2306-2308.
[n] J. Seeman, “Second-Generation B-Factory Proposals and Lessons Learned from B-Factory Operation”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO3RAI02, pp. 28-32.
[n] K. Noda et al., “HIMAC and New Facility Design for Wide Spread Use of Carbon Cancer Therapy”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THA201, pp. XX-XX.
[n] J. A. Holmes, Y. W. Kang, A. E. Fathy, and K. R. Shin, “Beam Acceleration by a Multicell RF Cavity Structure Proposed for Improved Yield in Hydroforming”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC054, pp. 1293-1295.
[n] F. Mayet, R. W. Assmann, S. Schreiber, and M. Vogt, “Studies on a Diagnostic Pulse for FLASH”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3506-3508. doi:10.18429/JACoW-IPAC2014-THPME116
[n] S. M. Lidia et al., “FRIB Machine Protection System Design and Validation Studies”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 221-225. doi:10.18429/JACoW-IBIC2015-MOPB070
[n] P. J. Spiller et al., “The Accelerator Facility of the Facility for Antiproton and Ion Research”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1343-1345. doi:10.18429/JACoW-IPAC2015-TUBB2
[n] D. Horan, G. Pile, and A. Cours, “352-MHz Klystron Performance at the Advanced Photon Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP153, pp. 1022-1024.
[n] T. Obina et al., “Improvement of Photon Factory Advanced Ring Control System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE012, pp. 2351-2353.
[n] K. Umemori et al., “Construction of Main Linac Cryomodule for Compact ERL Project”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO016, pp. 2349-2351.
[n] T. Inaniwa et al., “Dosimetric Impact of Multiple Energy Operation in Carbon-ion Radiotherapy”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS073, pp. 3598-3600.
[n] V. S. Morozov et al., “Status of the MEIC Ion Collider Ring Design”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2307-2310. doi:10.18429/JACoW-IPAC2015-TUPWI031
[n] A. Kitagawa et al., “Improvement of Beam Intensities for ion beams with Charge-to-Mass Ratio of 1/3 with Two-Frequency Heating Technique”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper TUOMMH01, pp. 83-86.
[n] J. Seeman et al., “Results and Plans of the PEP-II B-Factory”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT143, pp. 875-877.
[n] D. A. Shkitov et al., “Non-Invasive Bunch Length Diagnostics Based on Interferometry From Double Diffraction Radiation Target”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME067, pp. 631-633.
[n] T. Kamitani et al., “Beam Optics Matching in the KEKB Injector Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D019, pp. 429-431.
[n] G. Wuestefeld, A. Jankowiak, J. Knobloch, and M. Ries, “Simultaneous Long and Short Electron Bunches in the BESSY II Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC014, pp. 2936-2938.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Novokhatski and M. Zobov, “Longitudinal Beam Stability in the Super B-Factory”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP085, pp. 4737-4739.
- S. B. Vorozhtsov, B. I. Zamolodchikov, and N. L. Zaplatin, “The Magnetic System of the Monoenergetic Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69D19, pp. XX-XX.
- S. Yamaguchi, “Design of Input and Output Couplers for Linear Accelerator Structures”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP11, pp. 346-348.
- T. W. Koeth, B. L. Beaudoin, S. Bernal, I. Haber, R. A. Kishek, and P. G. O, “Bunch-End Interpenetration During Evolution to Longitudinal Uniformity in a Space-Charge-Dominated Storage Ring”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOOBS3, pp. 22-26.
- D. Gu et al., “Beam-based Alignment Simulation on Flash-I Undulator”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO030, pp. 1940-1942.
- R. Calaga et al., “Beam Losses Due to Abrupt Crab Cavity Failures in the LHC”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOODN4, pp. 76-78.
- X. Zhou, T. Natsui, Y. Ogawa, and M. Yoshida, “Ytterbium Fiber Laser System of DAW RF Gun for SuperKEKB”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD056, pp. 2648-2650.
- K. R. Shin, A. E. Fathy, and Y. W. Kang, “Double-Gap Rebuncher Cavity Design of SNS MEBT”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP069, pp. 3898-3900.
- M. Kase, Y. Oikawa, M. Saito, I. Takeshita, Y. Yano, and I. Yokoyama, “Beam Diagnostic Equipments for RIKEN Ring Cyclotron and Its Beam Lines”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I5-01, pp. 443-446.
- G. Lambert et al., “Seeding the FEL of the SCSS Test Accelerator with the 5th Harmonic of a Ti: Sa Laser Produced in Gases”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC018, pp. 109-111.
- T. Goetsch, J. Feikes, M. Ries, G. Wuestefeld, and A.-S. Mueller, “Lifetime Studies at Metrology Light Source and ANKA”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA012, pp. 88-90.
- V. L. Smirnov and S. B. Vorozhtsov, “A Cyclotron Complex for Acceleration of Carbon Ions”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 467-470.
- P. O. Schmid, D. B. Engel, J. Feikes, M. Ries, and G. Wuestefeld, “Mitigating the Pertubations Caused by U 180 at the Metrology Light Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC012, pp. 2930-2932.
- A. Semenov et al., “Schottky Diode Detectors for Monitoring Coherent THz Synchrotron Radiation Pulses”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3465-3467.
- S. W. Lee, M. S. Champion, and Y. W. Kang, “Study of Pretuning and High Power Test of DTL Iris Waveguide Couplers Using a Single Cell Cavity”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 522-524.
- J. N. Corlett and R. O. Hettel, “Performance Requirements and Metrics for Future X-Ray Sources”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP038, pp. 1177-1179.
- F. Sannibale et al., “Status of the APEX Project at LBNL”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEEPPB004, pp. 2173-2175.
- P. J. Giansiracusa, M. J. Boland, M. P. Lafky, T. G. Lucas, R. P. Rassool, and M. Volpi, “The Effect of the SLED Installation on Extracted and Lost Beam at the Australian Synchrotron Linac.”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2794-2797.
- G. M. Kazakevich et al., “A Two-stage Injection-locked Magnetron for Accelerators with Superconducting Cavities”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC059, pp. 2348-2350.
- S. Chen, N. Nakamura, M. Shimada, D. Zhou, S. Huang, and K. X. Liu, “Transverse Multi-Pass Beam Breakup Simulation for KEK ERL Light Source”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 248-250.
- A. K. Krasnykh, “Overview of Driver Technologies for Nanosecond TEM Kickers”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3645-3647.
- T. Hattori, A. Kitagawa, M. Muramatsu, and N. Hayashizaki, “Relationship of Performance and RF Resonance Modes”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper WEPP02, pp. 121-124.
- T. Shintake et al., “C-Band RF-System Development for e+e- Linear Collider”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D029, pp. 154-156.
- D. A. Shkitov, A. Potylitsyn, A. S. Aryshev, and J. Urakawa, “Double Diffraction Radiation Target Interferometry for Micro-train Beam Diagnostics”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3635-3637.
- S. Michizono, S. Anami, M. Kawamura, S. Yamaguchi, and T. Kobayashi, “Digital RF Control System for 400-MeV Proton Linac of JAERI/KEK Joint Project”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO462, pp. 184-186.
- M.-H. Wang, Y. Cai, R. O. Hettel, and Y. Nosochkov, “Reduction of Beam Emittance of PEP-X Using Quadruple Bend Achromat Cell”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP018, pp. 2306-2308.
- J. Seeman, “Second-Generation B-Factory Proposals and Lessons Learned from B-Factory Operation”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO3RAI02, pp. 28-32.
- K. Noda et al., “HIMAC and New Facility Design for Wide Spread Use of Carbon Cancer Therapy”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THA201, pp. XX-XX.
- J. A. Holmes, Y. W. Kang, A. E. Fathy, and K. R. Shin, “Beam Acceleration by a Multicell RF Cavity Structure Proposed for Improved Yield in Hydroforming”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC054, pp. 1293-1295.
- F. Mayet, R. W. Assmann, S. Schreiber, and M. Vogt, “Studies on a Diagnostic Pulse for FLASH”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3506-3508.
- S. M. Lidia et al., “FRIB Machine Protection System Design and Validation Studies”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 221-225.
- P. J. Spiller et al., “The Accelerator Facility of the Facility for Antiproton and Ion Research”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1343-1345.
- D. Horan, G. Pile, and A. Cours, “352-MHz Klystron Performance at the Advanced Photon Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP153, pp. 1022-1024.
- T. Obina et al., “Improvement of Photon Factory Advanced Ring Control System”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE012, pp. 2351-2353.
- K. Umemori et al., “Construction of Main Linac Cryomodule for Compact ERL Project”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO016, pp. 2349-2351.
- T. Inaniwa et al., “Dosimetric Impact of Multiple Energy Operation in Carbon-ion Radiotherapy”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS073, pp. 3598-3600.
- V. S. Morozov et al., “Status of the MEIC Ion Collider Ring Design”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2307-2310.
- A. Kitagawa et al., “Improvement of Beam Intensities for ion beams with Charge-to-Mass Ratio of 1/3 with Two-Frequency Heating Technique”, in Proc. 21st Int. Workshop on ECR Ion Sources (ECRIS'14), Nizhny Novgorod, Russia, Aug. 2014, paper TUOMMH01, pp. 83-86.
- J. Seeman et al., “Results and Plans of the PEP-II B-Factory”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT143, pp. 875-877.
- D. A. Shkitov et al., “Non-Invasive Bunch Length Diagnostics Based on Interferometry From Double Diffraction Radiation Target”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME067, pp. 631-633.
- T. Kamitani et al., “Beam Optics Matching in the KEKB Injector Linac”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D019, pp. 429-431.
- G. Wuestefeld, A. Jankowiak, J. Knobloch, and M. Ries, “Simultaneous Long and Short Electron Bunches in the BESSY II Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC014, pp. 2936-2938.
Back to search