Favourites
For Word
[n] M. Ha, S. H. Han, H. Jeong, S. H. Nam, H. Suh, and M. Yoon, “Magnet Power Supplies of PLS 2 GeV Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP104G, pp. 2361-2363.
[n] C. Kuhn, J. Bahrdt, A. Gaupp, M. Scheer, and B. Schulz, “Developing of Advanced Magnet Structures for Cryogenic in Vacuum Permanent Magnet Undulators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2004-2006. doi:10.18429/JACoW-IPAC2014-WEPRO029
[n] A. Topaloudis and C. Rachex, “Visualisation of Real-Time Front-End Software Architecture (FESA) Developments at CERN”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1853-1856. doi:10.18429/JACoW-ICALEPCS2017-THPHA180
[n] A. S. Alexandrova et al., “Optical Beam Loss Monitors Based on Fibres for the CLARA Phase 1 Beam-Line”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4869-4872. doi:10.18429/JACoW-IPAC2018-THPML090
[n] C. Goffing, J. Keintzel, A.-S. Mueller, M. Reissig, and F. Zimmermann, “Beam-based alignment techniques for the FCC-ee”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPM109, unpublished.
[n] I. S. Guk et al., “Beam Injection in Recirculator SALO”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE050, pp. 3109-3110.
[n] C. Boffo, D. Connolly, L. Elementi, and Y. Tereshkin, “Control System for the BCP Processing Facility at FNAL”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP04, pp. 278-281.
[n] V. Kamerdzhiev et al., “Beam Instrumentation for the COSY Electron Cooler”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPB48, pp. 468-470.
[n] F. D. Dziuba et al., “Measurements on the Superconducting 217 MHz CH Cavity During the Manufacturing Phase”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB075, pp. 757-759.
[n] D. Castronovo, A. Fabris, C. Pasotti, P. Pittana, and M. Svandrlik, “Design of a 3rd Harmonic Superconducting Cavity for Bunch Lengthening in ELETTRA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP16C, pp. 1879-1881.
[n] P.-C. Chiu, Y.-S. Cheng, K.-T. Hsu, C.-H. Huang, and C. Wu, “TLS orbit feedback upgrade”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4798-4801. doi:10.18429/JACoW-IPAC2023-THPL141
[n] V. Toivanen, P. Jardin, L. Maunoury, and C. Michel, “Redesign of the GANIL GTS ECRIS for 1+/n+ Studies”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 39-43. doi:10.18429/JACoW-ECRIS2018-MOC6
[n] N. Delerue, D. Auguste, J. Bonis, F. Gauthier, S. Jenzer, and A. M. Moutardier, “Tests of a 3D Printed BPM with a Stretched Wire and with a Particle Beam”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4368-4371. doi:10.18429/JACoW-IPAC2019-FRXXPLS1
[n] B. E. Schultz, F. Ames, S. B. Beale, M. Cavenaile, and C. R. J. Charles, “Status of the CANREB EBIS at TRIUMF”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper TH2WH02, unpublished.
[n] R. M. Zwaska, “The Sinuous Target”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2630-2632. doi:10.18429/JACoW-IPAC2015-WEPWA056
[n] F. Li et al., “Progress Towards X-ray Free-electron Laser Driven by Plasma Wakefield Accelerator at SXFEL”, presented at the FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, paper TH4A1, unpublished.
[n] G. Guignard and C. Fischer, “Optimizing Energy Spread in the CLIC Main Linac”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3231-3234.
[n] K. Beckert et al., “Efficient Collection and Cooling of Radioactive Ion Beams in a Collector Ring CR”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP4B04, pp. 536-538.
[n] C. Chu et al., “Application Programming Structure and Physics Applications”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE015, pp. 2360-2362.
[n] T. P. Wangler, R. W. Garnett, W. P. Lysenko, and J. Qiang, “Challenge of Benchmarking Simulation Codes for the LANL Beam-Halo Experiment”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG011, pp. 2613-2615.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Ha, S. H. Han, H. Jeong, S. H. Nam, H. Suh, and M. Yoon, “Magnet Power Supplies of PLS 2 GeV Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP104G, pp. 2361-2363.
- C. Kuhn, J. Bahrdt, A. Gaupp, M. Scheer, and B. Schulz, “Developing of Advanced Magnet Structures for Cryogenic in Vacuum Permanent Magnet Undulators”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2004-2006.
- A. Topaloudis and C. Rachex, “Visualisation of Real-Time Front-End Software Architecture (FESA) Developments at CERN”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1853-1856.
- A. S. Alexandrova et al., “Optical Beam Loss Monitors Based on Fibres for the CLARA Phase 1 Beam-Line”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4869-4872.
- C. Goffing, J. Keintzel, A.-S. Mueller, M. Reissig, and F. Zimmermann, “Beam-based alignment techniques for the FCC-ee”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM109, this conference.
- I. S. Guk et al., “Beam Injection in Recirculator SALO”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE050, pp. 3109-3110.
- C. Boffo, D. Connolly, L. Elementi, and Y. Tereshkin, “Control System for the BCP Processing Facility at FNAL”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP04, pp. 278-281.
- V. Kamerdzhiev et al., “Beam Instrumentation for the COSY Electron Cooler”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPB48, pp. 468-470.
- F. D. Dziuba et al., “Measurements on the Superconducting 217 MHz CH Cavity During the Manufacturing Phase”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB075, pp. 757-759.
- D. Castronovo, A. Fabris, C. Pasotti, P. Pittana, and M. Svandrlik, “Design of a 3rd Harmonic Superconducting Cavity for Bunch Lengthening in ELETTRA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP16C, pp. 1879-1881.
- P.-C. Chiu, Y.-S. Cheng, K.-T. Hsu, C.-H. Huang, and C. Wu, “TLS orbit feedback upgrade”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL141, pp. 4798-4801.
- V. Toivanen, P. Jardin, L. Maunoury, and C. Michel, “Redesign of the GANIL GTS ECRIS for 1+/n+ Studies”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 39-43.
- N. Delerue, D. Auguste, J. Bonis, F. Gauthier, S. Jenzer, and A. M. Moutardier, “Tests of a 3D Printed BPM with a Stretched Wire and with a Particle Beam”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4368-4371.
- B. E. Schultz, F. Ames, S. B. Beale, M. Cavenaile, and C. R. J. Charles, “Status of the CANREB EBIS at TRIUMF”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper TH2WH02, unpublished.
- R. M. Zwaska, “The Sinuous Target”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2630-2632.
- F. Li et al., “Progress Towards X-ray Free-electron Laser Driven by Plasma Wakefield Accelerator at SXFEL”, presented at the 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper TH4A1, unpublished.
- G. Guignard and C. Fischer, “Optimizing Energy Spread in the CLIC Main Linac”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3231-3234.
- K. Beckert et al., “Efficient Collection and Cooling of Radioactive Ion Beams in a Collector Ring CR”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP4B04, pp. 536-538.
- C. Chu et al., “Application Programming Structure and Physics Applications”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE015, pp. 2360-2362.
- T. P. Wangler, R. W. Garnett, W. P. Lysenko, and J. Qiang, “Challenge of Benchmarking Simulation Codes for the LANL Beam-Halo Experiment”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPG011, pp. 2613-2615.
Back to search