Favourites
For Word
[n] G. Sabbi et al., “Magnetic Design of a High Gradient Quadrupole for the LHC Low-$eta$ Insertions”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P004, pp. 3398-3400.
[n] M. E. Nordby, N. Kurita, and C.-K. Ng, “Bellows Design for the PEP-II High Energy Ring Arc Chambers”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP07, pp. 2048-2050.
[n] J. G. Cogan, R. Bartoldus, D. W. Miller, and E. Strauss, “ATLAS Online Determination and Feedback of LHC Beam Parameters”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper FRBHAULT02, pp. 1306-1309.
[n] F. Schlander, S. Aderhold, D. Reschke, and K. Twarowski, “Analysis of Recent Results from Second Sound, Temperature Mapping and Optical Inspection of 1.3 GHz Cavities at DESY”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO066, pp. 558-560.
[n] D. E. Johnson, C. S. Mishra, S. D. Holmes, N. Gelfand, J. A. Holt, and L. Michelotti, “Design and Simulation of the Antiproton Recycler Lattice”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W016, pp. 997-999.
[n] D. Reschke et al., “Results on Large Grain Nine-Cell Cavities at DESY: Gradients up to 45 MV/m after Electropolishing”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO046, pp. 490-494.
[n] F. B?©dker, L. O. Baandrup, C. E. Hansen, D. Kristoffersen, C. W. Ostenfeld, and C. G. Pedersen, “Mechanical and Magnetic Performance of Compact Synchrotron Magnet Systems for MAXIV and SOLARIS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1229-1231. doi:10.18429/JACoW-IPAC2014-TUPRO081
[n] T.-H. Kim, Y. Makita, S. Nakamura, T. Nakanishi, Y. Pu, and H. Tanaka, “Design and a Beam Test of an LEBT of a CW Microtron”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO014, pp. 2352-2354.
[n] M. Olvegaard et al., “Progress at the FREIA Laboratory”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3072-3075. doi:10.18429/JACoW-IPAC2015-WEPMN065
[n] A. V. Zlobin, G. Chlachidze, A. Nobrega, I. Novitski, and M. Karppinen, “QUENCH PROTECTION STUDIES OF 11T Nb3Sn DIPOLE MODELS FOR LHC UPGRADES”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2725-2727. doi:10.18429/JACoW-IPAC2014-WEPRI098
[n] H. Bongers et al., “The IH-7-Gap Resonators of the Munich Accelerator for Fission Fragments (MAFF) Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH113, pp. 3945-3947.
[n] C. W. O. Ostenfeld, F. B?©dker, M. B?©ttcher, H. Bach, E. B. Christensen, and M. Pedersen, “Apple-II and TESLA FEL Undulators at Danfysik A/S”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN006, pp. 923-925.
[n] H. L. Rutkowski et al., “An Induction Linac Injector for Scaled Experiments”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1952-1955.
[n] A. Terebilo, J. Corbett, D. Keeley, and G. Portmann, “Simulated Commissioning of SPEAR 3 Storage Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE021, pp. 2372-2372.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Sabbi et al., “Magnetic Design of a High Gradient Quadrupole for the LHC Low-$eta$ Insertions”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P004, pp. 3398-3400.
- M. E. Nordby, N. Kurita, and C.-K. Ng, “Bellows Design for the PEP-II High Energy Ring Arc Chambers”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP07, pp. 2048-2050.
- J. G. Cogan, R. Bartoldus, D. W. Miller, and E. Strauss, “ATLAS Online Determination and Feedback of LHC Beam Parameters”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper FRBHAULT02, pp. 1306-1309.
- F. Schlander, S. Aderhold, D. Reschke, and K. Twarowski, “Analysis of Recent Results from Second Sound, Temperature Mapping and Optical Inspection of 1.3 GHz Cavities at DESY”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO066, pp. 558-560.
- D. E. Johnson, C. S. Mishra, S. D. Holmes, N. Gelfand, J. A. Holt, and L. Michelotti, “Design and Simulation of the Antiproton Recycler Lattice”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9W016, pp. 997-999.
- D. Reschke et al., “Results on Large Grain Nine-Cell Cavities at DESY: Gradients up to 45 MV/m after Electropolishing”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO046, pp. 490-494.
- F. B?©dker, L. O. Baandrup, C. E. Hansen, D. Kristoffersen, C. W. Ostenfeld, and C. G. Pedersen, “Mechanical and Magnetic Performance of Compact Synchrotron Magnet Systems for MAXIV and SOLARIS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1229-1231.
- T.-H. Kim, Y. Makita, S. Nakamura, T. Nakanishi, Y. Pu, and H. Tanaka, “Design and a Beam Test of an LEBT of a CW Microtron”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO014, pp. 2352-2354.
- M. Olvegaard et al., “Progress at the FREIA Laboratory”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3072-3075.
- A. V. Zlobin, G. Chlachidze, A. Nobrega, I. Novitski, and M. Karppinen, “QUENCH PROTECTION STUDIES OF 11T Nb3Sn DIPOLE MODELS FOR LHC UPGRADES”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2725-2727.
- H. Bongers et al., “The IH-7-Gap Resonators of the Munich Accelerator for Fission Fragments (MAFF) Linac”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH113, pp. 3945-3947.
- C. W. O. Ostenfeld, F. B?©dker, M. B?©ttcher, H. Bach, E. B. Christensen, and M. Pedersen, “Apple-II and TESLA FEL Undulators at Danfysik A/S”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN006, pp. 923-925.
- H. L. Rutkowski et al., “An Induction Linac Injector for Scaled Experiments”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1952-1955.
- A. Terebilo, J. Corbett, D. Keeley, and G. Portmann, “Simulated Commissioning of SPEAR 3 Storage Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE021, pp. 2372-2372.
Back to search