Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Penco et al., “Beam Emittance Measurement for the New Full Energy Injector at ELETTRA”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC079, pp. 1236-1238.
[n] J. Stadlmann et al., “Ion Optical Design of the Heavy Ion Synchrotron SIS100”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH079, pp. 214-216.
[n] C. Vallet et al., “Flux Trapping in Superconducting Cavities”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1295-1298.
[n] G. D'Auria, P. Delgiusto, M. M. Milloch, C. Serpico, and D. Wang, “The Impact of PSK Timing on Energy Stability of e-Beam at FERMI@ELETTRA”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC008, pp. 82-84.
[n] J. H. Shao et al., “Recent progress of short pulse dielectric two-beam acceleration”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 640-643. doi:10.18429/JACoW-IPAC2018-TUYGBE3
[n] C. J. A. Corsten and H. L. Hagedoorn, “Uncoupled and Coupled Orbit Motion in a Storage Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2624-2627.
[n] H. Kim et al., “Development of a 500 MHz high power solid state power amplifier based on GaN transistors”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS014, unpublished.
[n] K. R. Kim, B. S. Park, H. R. Lee, K. S. Kang, S. W. Kang, and B. H. Choi, “50MeV Proton Beam Test Facility for Low Flux Beam Utilization Studies of PEFP”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP19011, pp. XX-XX.
[n] V. A. Dimov et al., “Beam Commissioning of the 750 MHz Proton RFQ for the LIGHT Prototype”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 658-660. doi:10.18429/JACoW-IPAC2018-TUPAF002
[n] M. Veronese et al., “Coherent Ultraviolet Radiation Measurements of Laser Induced Bunching in a Seeded FEL”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF27, pp. 879-882.
[n] Y. Cai, J. Irwin, M. Sullivan, and Y. T. Yan, “Application of Model-Independent Analysis to PEP-II Rings”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH134, pp. 3555-3557.
[n] C. Wittig, M. Mayerhofer, J. Mitteneder, and G. Dollinger, “A bead-pulling test stand for s-band cavities”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA059, unpublished.
[n] A. R. Vrielink, S. G. Tantawi, and F. Toufexis, “Theoretical Analysis and Simulation of a Compact Frequency Multiplier for High Power Millimeter and Terahertz Sources”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 576-578. doi:10.18429/JACoW-IPAC2016-MOPMY035
[n] M. E. Biagini, Y. Cai, J. T. Seeman, M. Sullivan, U. Wienands, and M. Placidi, “A Low-Energy Ring Lattice Design for the PEP-N Project”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH128, pp. 3537-3539.
[n] S. Spampinati et al., “Commissioning of the FERMI@ELETTRA Laser Heater”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD58, pp. 177-180.
[n] F. Meot and V. S. Morozov, “9-D Polarized Proton Transport in the MEIC Figure-8" Collider Ring - First Steps"”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2375-2377. doi:10.18429/JACoW-IPAC2015-TUPWI054
[n] G. Burt, C. D. Beard, L. Bellantoni, A. C. Dexter, and P. Goudket, “Progress towards Crab Cavity Solutions for the ILC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS075, pp. 724-726.
[n] C. D. Beard, P. A. Corlett, R. M. Jones, A. J. Moss, and J. H. P. Rogers, “TDR Measurements in support of ILC Collimator Studies”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS071, pp. 712-714.
[n] W. S. Chan, “Towards a green accelerator: implementing energy-saving practices at NSRRC”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEZN1, unpublished.
[n] P. Varghese et al., “Multichannel Vector Field Control Module for LLRF Control of Superconducting Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN112, pp. 2298-2300.
[n] V. Chouhan, D. J. Bice, D. A. Burk, M. K. Ng, and G. Wu, “Visual, Optical and Replica Inspections: Surface Preparation of 650 MHz Nb Cavity for PIP-II Linac”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 507-511. doi:10.18429/JACoW-SRF2023-TUPTB041
[n] H. Nair, V. Dev, M. K. Nayak, P. K. Sarkar, D. N. Sharma, and V. Verma, “Radiation Safety Considerations of the Operation of INDUS-1 Synchrotron Radiation Source”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA015, pp. 121-123.
[n] I. Skudnova, “Particle Dynamics Optimization in DTL”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 579-580. doi:10.18429/JACoW-LINAC2018-TUPO116
[n] S. V. Kutsaev, K. I. Nikolskiy, and N. P. Sobenin, “Traveling Wave Electron Linac for Synchrotron Injector”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP213, pp. 2519-2521.
[n] J. H. P. Rogers, C. D. Beard, and P. A. Corlett, “High Power Coupler Studies for the ERLP”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT067, pp. 3736-3738.
[n] B. R. Blomberg et al., “Planned High-brightness Channeling Radiation Experiment at Fermilab's Advanced Superconducting Test Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1457-1459. doi:10.18429/JACoW-IPAC2014-TUPME044
[n] L. M. Zheng et al., “Measurements of Thermal Emittance for Cesium Telluride Photocathodes in an L-Band RF Gun”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1491-1493. doi:10.18429/JACoW-IPAC2017-TUPAB074
[n] M. Mayerhofer, J. Mitteneder, C. Wittig, I. Prestes, E. Jägle, and G. Dollinger, “First high quality DTL cavity additively manufactured from pure copper”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4967-4970. doi:10.18429/JACoW-IPAC2023-THPM035
[n] Y. Cai, W. Kozanecki, K. Ohmi, J. Seeman, and M. Tawada, “Simulations and Experiments of Beam-Beam Effects in e+e- Storage Rings”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPC006, pp. 520-524.
[n] C. D. Beard, J. W. McKenzie, B. L. Militsyn, and B. D. Muratori, “Optimisation of a 1.5-cell High Average Current Gun for 4GLS”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP68, pp. XX-XX.
[n] Y. Cai, J. Seeman, K. G. Sonnad, and U. Wienands, “Doubling the PEP-II Luminosity in Simulations”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS048, pp. 649-651.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Penco et al., “Beam Emittance Measurement for the New Full Energy Injector at ELETTRA”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC079, pp. 1236-1238.
- J. Stadlmann et al., “Ion Optical Design of the Heavy Ion Synchrotron SIS100”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH079, pp. 214-216.
- C. Vallet et al., “Flux Trapping in Superconducting Cavities”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1295-1298.
- G. D'Auria, P. Delgiusto, M. M. Milloch, C. Serpico, and D. Wang, “The Impact of PSK Timing on Energy Stability of e-Beam at FERMI@ELETTRA”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC008, pp. 82-84.
- J. H. Shao et al., “Recent progress of short pulse dielectric two-beam acceleration”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 640-643.
- C. J. A. Corsten and H. L. Hagedoorn, “Uncoupled and Coupled Orbit Motion in a Storage Ring”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2624-2627.
- H. Kim et al., “Development of a 500 MHz high power solid state power amplifier based on GaN transistors”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS014, this conference.
- K. R. Kim, B. S. Park, H. R. Lee, K. S. Kang, S. W. Kang, and B. H. Choi, “50MeV Proton Beam Test Facility for Low Flux Beam Utilization Studies of PEFP”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP19011, pp. XX-XX.
- V. A. Dimov et al., “Beam Commissioning of the 750 MHz Proton RFQ for the LIGHT Prototype”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 658-660.
- M. Veronese et al., “Coherent Ultraviolet Radiation Measurements of Laser Induced Bunching in a Seeded FEL”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF27, pp. 879-882.
- Y. Cai, J. Irwin, M. Sullivan, and Y. T. Yan, “Application of Model-Independent Analysis to PEP-II Rings”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH134, pp. 3555-3557.
- C. Wittig, M. Mayerhofer, J. Mitteneder, and G. Dollinger, “A bead-pulling test stand for s-band cavities”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA059, unpublished.
- A. R. Vrielink, S. G. Tantawi, and F. Toufexis, “Theoretical Analysis and Simulation of a Compact Frequency Multiplier for High Power Millimeter and Terahertz Sources”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 576-578.
- M. E. Biagini, Y. Cai, J. T. Seeman, M. Sullivan, U. Wienands, and M. Placidi, “A Low-Energy Ring Lattice Design for the PEP-N Project”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH128, pp. 3537-3539.
- S. Spampinati et al., “Commissioning of the FERMI@ELETTRA Laser Heater”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper MOPD58, pp. 177-180.
- F. Meot and V. S. Morozov, “9-D Polarized Proton Transport in the MEIC Figure-8" Collider Ring - First Steps"”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2375-2377.
- G. Burt, C. D. Beard, L. Bellantoni, A. C. Dexter, and P. Goudket, “Progress towards Crab Cavity Solutions for the ILC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS075, pp. 724-726.
- C. D. Beard, P. A. Corlett, R. M. Jones, A. J. Moss, and J. H. P. Rogers, “TDR Measurements in support of ILC Collimator Studies”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS071, pp. 712-714.
- W. S. Chan, “Towards a green accelerator: implementing energy-saving practices at NSRRC”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEZN1, unpublished.
- P. Varghese et al., “Multichannel Vector Field Control Module for LLRF Control of Superconducting Cavities”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN112, pp. 2298-2300.
- V. Chouhan, D. J. Bice, D. A. Burk, M. K. Ng, and G. Wu, “Visual, Optical and Replica Inspections: Surface Preparation of 650 MHz Nb Cavity for PIP-II Linac”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB041, pp. 507-511.
- H. Nair, V. Dev, M. K. Nayak, P. K. Sarkar, D. N. Sharma, and V. Verma, “Radiation Safety Considerations of the Operation of INDUS-1 Synchrotron Radiation Source”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA015, pp. 121-123.
- I. Skudnova, “Particle Dynamics Optimization in DTL”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 579-580.
- S. V. Kutsaev, K. I. Nikolskiy, and N. P. Sobenin, “Traveling Wave Electron Linac for Synchrotron Injector”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP213, pp. 2519-2521.
- J. H. P. Rogers, C. D. Beard, and P. A. Corlett, “High Power Coupler Studies for the ERLP”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT067, pp. 3736-3738.
- B. R. Blomberg et al., “Planned High-brightness Channeling Radiation Experiment at Fermilab's Advanced Superconducting Test Accelerator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1457-1459.
- L. M. Zheng et al., “Measurements of Thermal Emittance for Cesium Telluride Photocathodes in an L-Band RF Gun”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1491-1493.
- M. Mayerhofer, J. Mitteneder, C. Wittig, I. Prestes, E. Jägle, and G. Dollinger, “First high quality DTL cavity additively manufactured from pure copper”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM035, pp. 4967-4970.
- Y. Cai, W. Kozanecki, K. Ohmi, J. Seeman, and M. Tawada, “Simulations and Experiments of Beam-Beam Effects in e+e- Storage Rings”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOPC006, pp. 520-524.
- C. D. Beard, J. W. McKenzie, B. L. Militsyn, and B. D. Muratori, “Optimisation of a 1.5-cell High Average Current Gun for 4GLS”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP68, pp. XX-XX.
- Y. Cai, J. Seeman, K. G. Sonnad, and U. Wienands, “Doubling the PEP-II Luminosity in Simulations”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS048, pp. 649-651.
Back to search