Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Alesini et al., “High Power Test Results of the Eli-NP S-Band Gun Fabricated with the New Clamping Technology Without Brazing”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3662-3665. doi:10.18429/JACoW-IPAC2017-THOBB1
[n] L. J. Laslett and L. Smith, “Stability of Intense Transported Beams”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3080-3083.
[n] A. Ghigo, Yu. A. Svistunov, and M. F. Vorogushin, “Safe Atomic Energetical Installation with Ion Linac”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP43G, pp. 2407-2412.
[n] T. Galek et al., “Aspects of SRF Cavity Optimization for BESSY-VSR Upgrade”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 171-174. doi:10.18429/JACoW-IPAC2015-MOPWA032
[n] E. Ramoisiaux, E. Gnacadja, C. Hernalsteens, N. Pauly, R. Tesse, and M. Vanwelde, “Activation of the IBA Proteus One Proton Therapy Beamline Using BDSIM and FISPACT-II”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 59-62. doi:10.18429/JACoW-NAPAC2022-MOPA02
[n] A. Saini, A. Lunin, C. S. Mishra, K. Ranjan, N. Solyak, and V. P. Yakovlev, “Optimization of End Cells of Low Beta Cavity of Higher Energy Part of Project X”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC010, pp. 2911-2913.
[n] Z. He, W. Cui, Y. H. Guo, Y. He, Y. Luo, and Q. Zhao, “Design of Control Networks for China Initiative Accelerator Driven System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 739-742. doi:10.18429/JACoW-ICALEPCS2015-WEPGF021
[n] J. Duda and B. Mori, “A Variational Principle Approach to the Evolution of Short-Pulse Laser Plasma Drivers”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA123, pp. 3669-3671.
[n] M. Dehn, “Automated Phase Optimization for the HDSM at MAMI”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR026, pp. 4020-4022.
[n] A. Malyzhenkov et al., “Online diagnostics and dosimetry of electron beam irradiation with a minimally invasive screens and beam charge monitors”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper MOPB037, unpublished.
[n] G. L. Orlandi et al., “FERMI-PSI Collaboration on Nano-Fabricated Wire-Scanners With Sub-Micrometer Resolution: Developments and Measurements.”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 249-252. doi:10.18429/JACoW-IBIC2019-TUBO02
[n] S. P. Antipov, C.-J. Jing, R. A. Kostin, S. V. Kuzikov, J. Q. Qiu, and A. A. Vikharev, “Inexpensive Brazeless RF Accelerator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4812-4813. doi:10.18429/JACoW-IPAC2017-THPVA148
[n] S. Fukumoto et al., “I GeV Proton Linear Accelerator of the Large Hadron Facility”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 839-842.
[n] P. A. Letnes, S. Bart Pedersen, A. Brielmann, H. Burkhardt, and D. K. Kramer, “Beam Scraping to Detect and Remove Halo in LHC Injection”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC149, pp. 3339-3341.
[n] G. Stupakov, “Coherent radiation of a microbunched beam in a short undulator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1406-1408. doi:10.18429/JACoW-IPAC2024-TUPG67
[n] G. Kube, R. Fischer, and K. Wittenburg, “Detailed Resolution Studies of the Synchrotron Radiation Profile Monitor for the HERA Electron Beam”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT025, pp. XX-XX.
[n] T. Saeki et al., “Study on Electro-Polishing Process by Niobium-Plate Sample With Artificial Pits”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO037, pp. 461-463.
[n] Y. Lee, E.-S. Kim, G. Hahn, and Z. Li, “Design Study and Multi-particle Tracking Simulation of the IH-DTL with KONUS Beam Dynamics for KHIMA Project”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3299-3301. doi:10.18429/JACoW-IPAC2016-THPMB032
[n] A. Blednykh and H. Henke, “A HOM Damped Planar Accelerating Structure”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF012, pp. 982-984.
[n] F. Reimann, U. van Rienen, U. Lehnert, and P. Michel, “Wakefield-based Dechirper Structures for ELBE”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2882-2884. doi:10.18429/JACoW-IPAC2014-THPRO012
[n] I. N. Draganic, J. F. O, and L. Rybarcyk, “Lifetime Study of Tungsten Filaments in an H- Surface Convertor Ion Source”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC23, pp. 1190-1192.
[n] M. Takao, K. K. Kaneki, Y. Shimosaki, and K. Soutome, “Correction of the Higher Order Dispersion for Improving Momentum Acceptance”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3029-3031. doi:10.18429/JACoW-IPAC2014-THPRO066
[n] A. Macridin, J. F. Amundson, A. V. Burov, P. Spentzouris, and E. G. Stern, “Intrinsic Landau Damping of Space Charge Modes at Coupling Resonance”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 863-866. doi:10.18429/JACoW-NAPAC2016-WEA4CO03
[n] G. Guignard, “Transverse Stability in Multibunch Mode for CLIC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3336-3339.
[n] A. A. Sidorin et al., “Development of Positron Annihilation Spectroscopy at the LEPTA Facility”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 499-501. doi:10.18429/JACoW-RUPAC2016-WEPSB060
[n] N. Vallis et al., “A positron source demonstrator for future colliders”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1518-1521. doi:10.18429/JACoW-IPAC2023-TUPA086
[n] R. Bacher, “Enhancing the Man-Machine-Interface of Accelerator Control Applications with Modern Consumer Market Technologies”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOAAB02, pp. 1044-1047.
[n] V. V. Anashin et al., “The Dedicated Synchrotron Radiation Source ”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 380-383.
[n] J. Tan, C. Wang, C. Xiao, W. Fang, and X. Huang, “R&D of X-band deflecting structure applied on SHINE”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 167-169. doi:10.18429/JACoW-IPAC2024-MOPC49
[n] Y. Wei et al., “Preliminary design of a new superconducting harmonic cavity for HALF storage ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2833-2835. doi:10.18429/JACoW-IPAC2024-WEPS60
[n] B. P. Xiao, K. Mernick, F. Severino, K. S. Smith, T. Xin, and A. Zaltsman, “Commissioning of the Normal Conducting Cavities for LEReC Project”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 44-46. doi:10.18429/JACoW-LINAC2018-MOPO005
[n] S. Niang, A. Huschauer, L. S. Esposito, M. Giovannozzi, and T. Pugnat, “Shower simulations for the CERN proton synchrotron internal dump and possible shielding options”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1730-1733. doi:10.18429/JACoW-IPAC2024-TUPS37
[n] H. Maesaka, “Full Energy Injection from the Sacla into the Spring-8 Storage Ring”, in Proc. IPAC'20, Caen, France, May 2020, paper FRXPLM02, pp. XX-XX.
[n] P. J. Spiller, “FAIR at GSI”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper MOBP02, pp. 24-28.
[n] M. Ikegami et al., “RF Amplitude and Phase Tuning of J-PARC DTL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN043, pp. 1481-1483.
[n] B. R. Reichardt, D. Domont-Yankulova, H. Klingbeil, and D. E. M. Lens, “Longitudinal Beam Stabilization at FAIR by Means of a Derivative Estimation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1795-1797. doi:10.18429/JACoW-IPAC2017-TUPIK048
[n] E. Shubin, V. V. Kolmogorov, and A. S. Styuf, “High Power Solid State RF Generator for Neutral Beam Injector”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 276-278. doi:10.18429/JACoW-RUPAC2016-TUPSA029
[n] M. Yoshimoto et al., “Development of the Beam Halo Monitor in the J-PARC 3-GeV RCS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEOAA03, pp. 2122-2124.
[n] L. Liu et al., “Status of Sirius – a New Brazilian Synchrotron Light Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUODA02, pp. 931-933.
[n] J. F. Zhang, P. Bambade, A. Faus-Golfe, H. Monard, and A. Loulergue, “Increasing the Dynamic and Momentum Apertures of the ThomX Ring by Means of Octupole Correctors”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 121-124. doi:10.18429/JACoW-IPAC2015-MOPWA016
[n] A. Miura et al., “Study of Beam Loss Measurement in J-PARC Linac”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP096, pp. 3678-3680.
[n] X. D. He, S. Dong, Y. J. Pei, and C.-F. Wu, “Measurement for the Kanthal Alloy Used for Collinear Load and S-band Load Design”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN048, pp. 2146-2148.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Alesini et al., “High Power Test Results of the Eli-NP S-Band Gun Fabricated with the New Clamping Technology Without Brazing”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3662-3665.
- L. J. Laslett and L. Smith, “Stability of Intense Transported Beams”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3080-3083.
- A. Ghigo, Yu. A. Svistunov, and M. F. Vorogushin, “Safe Atomic Energetical Installation with Ion Linac”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP43G, pp. 2407-2412.
- T. Galek et al., “Aspects of SRF Cavity Optimization for BESSY-VSR Upgrade”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 171-174.
- E. Ramoisiaux, E. Gnacadja, C. Hernalsteens, N. Pauly, R. Tesse, and M. Vanwelde, “Activation of the IBA Proteus One Proton Therapy Beamline Using BDSIM and FISPACT-II”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 59-62.
- A. Saini, A. Lunin, C. S. Mishra, K. Ranjan, N. Solyak, and V. P. Yakovlev, “Optimization of End Cells of Low Beta Cavity of Higher Energy Part of Project X”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC010, pp. 2911-2913.
- Z. He, W. Cui, Y. H. Guo, Y. He, Y. Luo, and Q. Zhao, “Design of Control Networks for China Initiative Accelerator Driven System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 739-742.
- J. Duda and B. Mori, “A Variational Principle Approach to the Evolution of Short-Pulse Laser Plasma Drivers”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA123, pp. 3669-3671.
- M. Dehn, “Automated Phase Optimization for the HDSM at MAMI”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR026, pp. 4020-4022.
- A. Malyzhenkov et al., “Online diagnostics and dosimetry of electron beam irradiation with a minimally invasive screens and beam charge monitors”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper MOPB037, unpublished.
- G. L. Orlandi et al., “FERMI-PSI Collaboration on Nano-Fabricated Wire-Scanners With Sub-Micrometer Resolution: Developments and Measurements.”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 249-252.
- S. P. Antipov, C.-J. Jing, R. A. Kostin, S. V. Kuzikov, J. Q. Qiu, and A. A. Vikharev, “Inexpensive Brazeless RF Accelerator”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4812-4813.
- S. Fukumoto et al., “I GeV Proton Linear Accelerator of the Large Hadron Facility”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 839-842.
- P. A. Letnes, S. Bart Pedersen, A. Brielmann, H. Burkhardt, and D. K. Kramer, “Beam Scraping to Detect and Remove Halo in LHC Injection”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC149, pp. 3339-3341.
- G. Stupakov, “Coherent radiation of a microbunched beam in a short undulator”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG67, pp. 1406-1408.
- G. Kube, R. Fischer, and K. Wittenburg, “Detailed Resolution Studies of the Synchrotron Radiation Profile Monitor for the HERA Electron Beam”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT025, pp. XX-XX.
- T. Saeki et al., “Study on Electro-Polishing Process by Niobium-Plate Sample With Artificial Pits”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO037, pp. 461-463.
- Y. Lee, E.-S. Kim, G. Hahn, and Z. Li, “Design Study and Multi-particle Tracking Simulation of the IH-DTL with KONUS Beam Dynamics for KHIMA Project”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3299-3301.
- A. Blednykh and H. Henke, “A HOM Damped Planar Accelerating Structure”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF012, pp. 982-984.
- F. Reimann, U. van Rienen, U. Lehnert, and P. Michel, “Wakefield-based Dechirper Structures for ELBE”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2882-2884.
- I. N. Draganic, J. F. O, and L. Rybarcyk, “Lifetime Study of Tungsten Filaments in an H- Surface Convertor Ion Source”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC23, pp. 1190-1192.
- M. Takao, K. K. Kaneki, Y. Shimosaki, and K. Soutome, “Correction of the Higher Order Dispersion for Improving Momentum Acceptance”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3029-3031.
- A. Macridin, J. F. Amundson, A. V. Burov, P. Spentzouris, and E. G. Stern, “Intrinsic Landau Damping of Space Charge Modes at Coupling Resonance”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 863-866.
- G. Guignard, “Transverse Stability in Multibunch Mode for CLIC”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3336-3339.
- A. A. Sidorin et al., “Development of Positron Annihilation Spectroscopy at the LEPTA Facility”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 499-501.
- N. Vallis et al., “A positron source demonstrator for future colliders”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA086, pp. 1518-1521.
- R. Bacher, “Enhancing the Man-Machine-Interface of Accelerator Control Applications with Modern Consumer Market Technologies”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOAAB02, pp. 1044-1047.
- V. V. Anashin et al., “The Dedicated Synchrotron Radiation Source ”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 380-383.
- J. Tan, C. Wang, C. Xiao, W. Fang, and X. Huang, “R&D of X-band deflecting structure applied on SHINE”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPC49, pp. 167-169.
- Y. Wei et al., “Preliminary design of a new superconducting harmonic cavity for HALF storage ring”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS60, pp. 2833-2835.
- B. P. Xiao, K. Mernick, F. Severino, K. S. Smith, T. Xin, and A. Zaltsman, “Commissioning of the Normal Conducting Cavities for LEReC Project”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 44-46.
- S. Niang, A. Huschauer, L. S. Esposito, M. Giovannozzi, and T. Pugnat, “Shower simulations for the CERN proton synchrotron internal dump and possible shielding options”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS37, pp. 1730-1733.
- H. Maesaka, “Full Energy Injection from the Sacla into the Spring-8 Storage Ring”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper FRXPLM02, pp. XX-XX.
- P. J. Spiller, “FAIR at GSI”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper MOBP02, pp. 24-28.
- M. Ikegami et al., “RF Amplitude and Phase Tuning of J-PARC DTL”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN043, pp. 1481-1483.
- B. R. Reichardt, D. Domont-Yankulova, H. Klingbeil, and D. E. M. Lens, “Longitudinal Beam Stabilization at FAIR by Means of a Derivative Estimation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1795-1797.
- E. Shubin, V. V. Kolmogorov, and A. S. Styuf, “High Power Solid State RF Generator for Neutral Beam Injector”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 276-278.
- M. Yoshimoto et al., “Development of the Beam Halo Monitor in the J-PARC 3-GeV RCS”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEOAA03, pp. 2122-2124.
- L. Liu et al., “Status of Sirius – a New Brazilian Synchrotron Light Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUODA02, pp. 931-933.
- J. F. Zhang, P. Bambade, A. Faus-Golfe, H. Monard, and A. Loulergue, “Increasing the Dynamic and Momentum Apertures of the ThomX Ring by Means of Octupole Correctors”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 121-124.
- A. Miura et al., “Study of Beam Loss Measurement in J-PARC Linac”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP096, pp. 3678-3680.
- X. D. He, S. Dong, Y. J. Pei, and C.-F. Wu, “Measurement for the Kanthal Alloy Used for Collinear Load and S-band Load Design”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN048, pp. 2146-2148.
Back to search