Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Heya, H. Horiike, K. Ishii, and S. Suzuki, “Development of a Pump-Probe System using a Non-Coated ZnSe Beam Splitter Cube for an MIR-FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS18, pp. XX-XX.
[n] L. Monaco et al., “In-vacuum Temperature Measurement of Niobium Components using Infrared Pyrometry during Electron Beam Welding Procedure”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO011, pp. 2334-2336.
[n] M. García et al., “IFMIF/EVEDA Beam Dump Shielding: Optimized Design of the Front Part”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS045, pp. 1635-1637.
[n] S. Hunt, D. Mathieson, K. Low, and C. Kalbfleisch, “Network Management of Real-Time Embedded Processors”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1823-1826.
[n] G. Cyvogt et al., “Single Pass Antiproton Beam Diagnostics of the CERN PS Accelerator Complex”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2167-2170.
[n] R. Anne, J. L. Vignet, Y. Georget, R. Hue, and C. Tribouillard, “Beam Profile and Beam Time Structure Monitors for Extracted Beams from the GANIL Cyclotrons”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-39, pp. 293-296.
[n] M. Rabasa et al., “CFD studies and experimental validation of the convective heat transfer coefficient in non-fully developed flows applied to conventional geometries used in particle accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4912-4915. doi:10.18429/JACoW-IPAC2023-THPM010
[n] R. Anne, A. Lefol, G. Milleret, and R. Perret, “Secondary Emission Detector System for SATURNE II”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1754-1756.
[n] H. Braun, F. Chautard, J. P. Delahaye, J. H. B. Madsen, A. Riche, and L. Rinolfi, “Beam Dynamics for the CLIC Test Facility (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-76, pp. 544-546.
[n] W. Kells, “Advanced Stochastic Cooling Mechanisms”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2459-2462.
[n] R. Calaga, S. Abeytunge, M. Bai, W. Fischer, F. Franchi, and R. Tomas, “Measurement and Optimization of Local Coupling from RHIC BPM Data”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE062, pp. 3553-3555.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Heya, H. Horiike, K. Ishii, and S. Suzuki, “Development of a Pump-Probe System using a Non-Coated ZnSe Beam Splitter Cube for an MIR-FEL”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THPOS18, pp. XX-XX.
- L. Monaco et al., “In-vacuum Temperature Measurement of Niobium Components using Infrared Pyrometry during Electron Beam Welding Procedure”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO011, pp. 2334-2336.
- M. García et al., “IFMIF/EVEDA Beam Dump Shielding: Optimized Design of the Front Part”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS045, pp. 1635-1637.
- S. Hunt, D. Mathieson, K. Low, and C. Kalbfleisch, “Network Management of Real-Time Embedded Processors”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1823-1826.
- G. Cyvogt et al., “Single Pass Antiproton Beam Diagnostics of the CERN PS Accelerator Complex”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2167-2170.
- R. Anne, J. L. Vignet, Y. Georget, R. Hue, and C. Tribouillard, “Beam Profile and Beam Time Structure Monitors for Extracted Beams from the GANIL Cyclotrons”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper B-39, pp. 293-296.
- M. Rabasa et al., “CFD studies and experimental validation of the convective heat transfer coefficient in non-fully developed flows applied to conventional geometries used in particle accelerators”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM010, pp. 4912-4915.
- R. Anne, A. Lefol, G. Milleret, and R. Perret, “Secondary Emission Detector System for SATURNE II”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1754-1756.
- H. Braun, F. Chautard, J. P. Delahaye, J. H. B. Madsen, A. Riche, and L. Rinolfi, “Beam Dynamics for the CLIC Test Facility (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-76, pp. 544-546.
- W. Kells, “Advanced Stochastic Cooling Mechanisms”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2459-2462.
- R. Calaga, S. Abeytunge, M. Bai, W. Fischer, F. Franchi, and R. Tomas, “Measurement and Optimization of Local Coupling from RHIC BPM Data”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE062, pp. 3553-3555.
Back to search