Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Ostoja-Gajewski, “IT Infrastructure Tips and Tricks for Control System and PLC”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1158-1161. doi:10.18429/JACoW-ICALEPCS2017-THBPA05
[n] B. P. Xiao, “Design of a Third Harmonic Cavity With Low R/Q for the ESR in BNL EIC”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 469. doi:10.18429/JACoW-SRF2021-TUPCAV014
[n] M. Zach et al., “The H- High Intensity Beam Extraction System for TRIUMF”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3042-3045.
[n] V. Kiselev et al., “VEPP-4M Collider: Status and Plans”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP06J, pp. 400-402.
[n] J. G. Wang, M. Reiser, and D. X. Wang, “Electron Beam Injector for Longitudinal Beam Physics Experiments”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1818-1821.
[n] A. Anoshin et al., “MODERNIZATION AND DEVELOPMENT OF KURCHATOV CENTER OF SYNCHROTRON RADIATION AND NANOTECHNOLOGY”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEAAU01, pp. XX-XX.
[n] Y. G. Song et al., “Development of a Machine Protection System for KOMAC Facility”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 334-336. doi:10.18429/JACoW-ICALEPCS2017-TUMPA02
[n] O. O. Andreassen and A. Tarasenko, “Continuous Integration Using LabVIEW, SVN and Hudson”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOMIB08, pp. 74-76.
[n] K. Whitham, “20 MeV S-Band Standing Waveguide”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1328-1334.
[n] E. P. Lee, “Resistance Driven Bunching Mode of an Accelerated Ion Pulse”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H03, pp. 263-265.
[n] M. Takagi et al., “Network-based Waveform Monitor for the J-PARC Accelerator Complex”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP565, pp. XX-XX.
[n] A. Moretti, Q. Kerns, C. Kerns, and M. B. Popovic, “Performance of Litton 805 MHz, 12 MW Klystrons”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1214-1217.
[n] V. N. Boriskin et al., “POWER SUPPLY CONTROL SYSTEM FOR THE LINAC OF THE NESTOR STORAGE RING”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBPH04, pp. XX-XX.
[n] R. E. Berg, “Rotating Wedge Cyclotron Beam Degrader”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-23, pp. 315-316.
[n] J. Serrano, “FPGA Technology in Instrumentation and Related Tools”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper ITTM02, pp. XX-XX.
[n] C. Biscari and F. Sgamma, “Installation and Alignment of the DAFNE Accelerators”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP08G, pp. 2289-2294.
[n] C.-H. Chang et al., “Conceptual Designs of Magnet Systems for the Taiwan Photon Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT076, pp. 3979-3981.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Ostoja-Gajewski, “IT Infrastructure Tips and Tricks for Control System and PLC”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1158-1161.
- B. P. Xiao, “Design of a Third Harmonic Cavity With Low R/Q for the ESR in BNL EIC”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 469.
- M. Zach et al., “The H- High Intensity Beam Extraction System for TRIUMF”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3042-3045.
- V. Kiselev et al., “VEPP-4M Collider: Status and Plans”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP06J, pp. 400-402.
- J. G. Wang, M. Reiser, and D. X. Wang, “Electron Beam Injector for Longitudinal Beam Physics Experiments”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1818-1821.
- A. Anoshin et al., “MODERNIZATION AND DEVELOPMENT OF KURCHATOV CENTER OF SYNCHROTRON RADIATION AND NANOTECHNOLOGY”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WEAAU01, pp. XX-XX.
- Y. G. Song et al., “Development of a Machine Protection System for KOMAC Facility”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 334-336.
- O. O. Andreassen and A. Tarasenko, “Continuous Integration Using LabVIEW, SVN and Hudson”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOMIB08, pp. 74-76.
- K. Whitham, “20 MeV S-Band Standing Waveguide”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1328-1334.
- E. P. Lee, “Resistance Driven Bunching Mode of an Accelerated Ion Pulse”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper H03, pp. 263-265.
- M. Takagi et al., “Network-based Waveform Monitor for the J-PARC Accelerator Complex”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP565, pp. XX-XX.
- A. Moretti, Q. Kerns, C. Kerns, and M. B. Popovic, “Performance of Litton 805 MHz, 12 MW Klystrons”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1214-1217.
- V. N. Boriskin et al., “POWER SUPPLY CONTROL SYSTEM FOR THE LINAC OF THE NESTOR STORAGE RING”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBPH04, pp. XX-XX.
- R. E. Berg, “Rotating Wedge Cyclotron Beam Degrader”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-23, pp. 315-316.
- J. Serrano, “FPGA Technology in Instrumentation and Related Tools”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper ITTM02, pp. XX-XX.
- C. Biscari and F. Sgamma, “Installation and Alignment of the DAFNE Accelerators”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP08G, pp. 2289-2294.
- C.-H. Chang et al., “Conceptual Designs of Magnet Systems for the Taiwan Photon Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT076, pp. 3979-3981.
Back to search
