Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. A. Liakin, “The Analysis of the Electron Beam Scanning Method for the Beam Profile Monitoring.”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT099, pp. 2721-2723.
[n] M. Bousonville, C. Christou, P. Hülsmann, S. Karau, and S. Vilcins, “Realisation of a 1.5 GHz single mode cavity for PETRA IV”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPB086, unpublished.
[n] T. Hellert et al., “Status of the Advanced Light Source”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1309-1312. doi:10.18429/JACoW-IPAC2024-TUPG37
[n] Y. Yang et al., “A high brightness electron beam research and application beamline at Tsinghua University”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2093-2096. doi:10.18429/JACoW-IPAC2023-TUPL152
[n] J. A. MacLachlan, “400 MeV Upgrade for the Fermilab Linac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 950-953.
[n] V. Popov, S. M. Hartman, S. Mikhailov, O. Oakeley, P. W. Wallace, and Y. K. Wu, “Trim Power Supplies for the Duke Booster and Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE074, pp. 3919-3921.
[n] E. Gray, A. Shapiro, and G. Spalek, “A Radio-Frequency Quadrupole Accelerator Longitudinal Field Stabilizer”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-34, pp. 122-124.
[n] C. Belver-Aguilar, A. Faus-Golfe, M. J. Barnes, and F. Toral, “Final Cross Section Design of the Stripline Kicker for the CLIC Damping Rings”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR016, pp. 1843-1845.
[n] P. Bagley, “Beam Beam Tune Shifts for 36 Bunch Operation in the Tevatron”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP048L, pp. 1155-1157.
[n] D. E. Kim, C. W. Chung, I. S. Ko, J.-S. Oh, and K.-H. Park, “Physics Requirement of a PLS-XFEL Undulator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS132, pp. 3592-3594.
[n] J. B. Murphy et al., “Commissioning of the Phase I Superconducting X-Ray lithography Source (SXLS) at BNL”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1107-1110.
[n] J. Klingmann et al., “Fabrication of DDS-3, an 11.4 GHz Damped-Detuned Structure”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP51, pp. 777-779.
[n] Z. Shen et al., “High Intensity Ion Beam Extraction System for FECR”, presented at the ECRIS'20, East Lansing, MI, USA, Sep. 2020, paper WEXZO01, unpublished.
[n] G. R. Werner et al., “Voltage Breakdown on Niobium and Copper Surfaces”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper MA005, pp. XX-XX.
[n] T. Mastorides et al., “LHC Beam Diffusion Dependence on RF Noise: Models and Measurements”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA062, pp. 1476-1478.
[n] K. L. F. Bane, C. Adolphsen, and C. D. Nantista, “RF Distribution Optimization in the Main Linacs of the ILC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS037, pp. 2424-2426.
[n] K. Torikai et al., “Induction Accelerating Cavity for a Circular Ring Accelerator”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT066, pp. 704-706.
[n] R. R. Lindberg, K.-J. Kim, Y. Cai, Y. Ding, and Z. Huang, “Transverse Gradient Undulators for a Storage Ring X-ray FEL Oscillator”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper THOBNO02, pp. 740-748.
[n] O. Makarov, B. Deriy, L. Emery, S. Sasaki, R. Soliday, and I. Vasserman, “Feedforward Correction of the Pulsed Circularly Polarizing Undulator at the Advanced Photon Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAG001, pp. 2261-2263.
[n] Y. U. Jeong, S. H. Park, B. C. Lee, H. J. Cha, and G. M. Kazakevitch, “Compact Terahertz Free-Electron Laser as a Users Facility”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper FRM103, pp. XX-XX.
[n] Q. Wu, L. T. Sun, and H. W. Zhao, “Development of 2.45 GHz ECR Ion Source at IMP”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 195-197. doi:10.18429/JACoW-ECRIS2018-THC1
[n] K. A. Brown et al., “A Scanning Target Profile Monitor for the Slow Extracted Beam at the AGS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P046, pp. 2149-2151.
[n] M. Arnold et al., “ERL Operation of S-DALINAC”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 1-4. doi:10.18429/JACoW-ERL2019-MOCOXBS02
[n] H. A. Duerr et al., “XPS Studies of Cs2Te Photocathodes”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper WEPPH048, pp. 457-460.
[n] V. Popov, S. M. Hartman, S. Mikhailov, O. Oakeley, P. W. Wallace, and Y. K. Wu, “3 kA Power Supplies for the Duke OK-5 FEL Wigglers”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE073, pp. 3901-3903.
[n] C. D. Marshall et al., “National Ignition Facility Control and Information System Operational Tools”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUA003, pp. 52-54.
[n] L. S. Cowie et al., “An X-Band Lineariser for the CLARA FEL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3848-3851. doi:10.18429/JACoW-IPAC2018-THPAL084
[n] S. Schreiber et al., “Improved Operation of the TTF Photoinjector for FEL Operation”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI052, pp. 1804-1806.
[n] D. B. Bazyl, H. De Gersem, W. F. O. M??ller, J. Enders, and S. Weih, “A 3 GHz SRF Reduced-beta Cavity for the S-DALINAC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3838-3840. doi:10.18429/JACoW-IPAC2018-THPAL081
[n] G. Guignard, “A Lattice with No Transition and Large Dynamic Aperture”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 915-918.
[n] B. T. McCuistian et al., “Temporal Spot Size Evolution of the DARHT First Axis Radiographic Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC066, pp. 1206-1208.
[n] E. G. Sandels, R. A. Church, I. S. K. Gardner, and H. C. Whitby, “A 2nd RF System for Nimrod”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 418-422.
[n] O. B. Malyshev et al., “Mechanical and Vacuum Design of the Wiggler Section of the ILC Damping Rings”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE092, pp. 3563-3565.
[n] V. Gubaidulin, A. Gamelin, and R. Nagaoka, “Beam-ion Instabilities and Their Mitigation for SOLEIL II”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2650-2653. doi:10.18429/JACoW-IPAC2023-WEPA004
[n] J. C. Jan et al., “Magnetic Field Character of TPS Booster Magnets”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME037, pp. 3594-3596.
[n] G. N. Kim et al., “Nuclear Data Measurements with a Pulsed Neutron Facility based on an Electron Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB068, pp. 430-432.
[n] I. P. S. Martin et al., “Progress with the Booster Design for the Diamond-II Upgrade”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 286-289. doi:10.18429/JACoW-IPAC2021-MOPAB071
[n] S. Ramamoorthy, P. Pearson, and J. Smith, “Error Handling in the NSLS Control System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR07, pp. 2250-2252.
[n] H. Huang et al., “Strategy for proton polarization in the Electron Ion Collider”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 523-526. doi:10.18429/JACoW-IPAC2023-MOPL011
[n] C. Christou, V. C. Kempson, and S. J. Singleton, “Enhancements to the Diamond Light Source Pre-Injector Linac”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP030, pp. 459-461.
[n] C.-K. Chang et al., “Logging of Operation Data at TLS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN090, pp. 371-373.
[n] A. Lumpkin and B. Yang, “Status of the Synchrotron Radiation Monitors for the APS Facility Rings”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ09, pp. 2470-2472.
[n] W. H. Li et al., “Ultrafast Nonlinear Photoemission from Alkali Antimonide Photocathodes”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 203-206. doi:10.18429/JACoW-NAPAC2019-MOPLH14
[n] M. Akemoto, S. Gold, A. Krasnykh, and R. Koontz, “Design of a PFN for the NLC Klystron Pulse Modulator”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D038, pp. 175-177.
[n] T. Xin et al., “Performance of 112 MHz SRF Gun at BNL”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1223-1227. doi:10.18429/JACoW-SRF2019-FRCAB5
[n] T. Hoffmann and H. Br?ñuning, “REMBRANDT - REMote Beam instRumentation And Network Diagnosis Tool”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC006, pp. 1103-1106.
[n] F.-T. Chung et al., “Energy-Savings for the TPS Booster RF System at the NSRRC in Taiwan”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3748-3750. doi:10.18429/JACoW-IPAC2018-THPAL046
[n] S. V. Barabin, A. V. Kozlov, T. Kulevoy, D. A. Liakin, A. Y. Lukashin, and D. N. Selesnev, “Pepper-Pot Emittance Metasurements”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 443-445. doi:10.18429/JACoW-RUPAC2018-THPSC18
[n] A. E. Candel et al., “Parallel Higher-Order Finite Element Method for Accurate Field Computations in Wakefield and PIC Simulations”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WEMPMP03, pp. 176-181.
[n] B. Taylor, H. Lancaster, and H. Hoag, “Engineering Design of the Injector Linac for the Advanced Light Source (ALS)”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-16, pp. 565-567.
[n] D. L. Judd et al., “Concepts, Features, and Design of a Sixteen-to-Four Beam Combiner for ILSE”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 968-971.
[n] M. Santana-Leitner, Y. Nosochkov, and T. O. Raubenheimer, “MadFLUKA Beam Line 3D Builder. Simulation of Beam Loss Propagation in Accelerators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 463-465. doi:10.18429/JACoW-IPAC2014-MOPME040
[n] X. He, S. Q. Liao, J. Long, J. Shi, W. Wang, and L. Yang, “A Proposal of using Improved Rhodotron as a High Dose Rate Micro-focused X-ray Source”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 143-145. doi:10.18429/JACoW-SAP2017-TUPH08
[n] H. A. Koivisto et al., “Electron Cyclotron Resonance Ion Source Related Research and Development Work at the Department of Physics, University of Jyväskylä (JYFL)”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 98-101. doi:10.18429/JACoW-ECRIS2020-TUZZO02
[n] H. Ao et al., “High Power Model Fabrication of Biperiodic L-support Disk-and-Washer Structure”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUA22, pp. 431-433.
[n] V. N. Pavlenko et al., “Characterization of Femtosecond-Laser-Induced Electron Emission from Diamond Nano-Tips”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 228-231. doi:10.18429/JACoW-NAPAC2019-MOPLH25
[n] C. M. Lyneis, J. Y. Benitez, M. M. Strohmeier, and D. S. Todd, “Coupling Microwave Power into ECR Ion Source Plasmas at Frequencies above 20 GHz”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper TUXO01, pp. XX-XX.
[n] J. Caporaso, “Transmission Line Analysis of Beam Deflection in a BPM Stripline Kicker”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9V041, pp. 1861-1863.
[n] S. Heifets and R. Rossmanith, “High Repetition Rate Kickers for Linear Colliders”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-09, pp. 547-549.
[n] K. Yamamoto et al., “Radiation Level in the J-PARC Rapid Cycling Synchrotron after First Study”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC133, pp. 382-384.
[n] R. Bartolini et al., “Overview of Accelerator Physics Studies and High Level Software for the Diamond Light Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE052, pp. 3188-3190.
[n] S. E. Sampayan et al., “Burst Mode FEL with the ETA-III Induction Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1554-1557.
For LaTeX
Use Complete Form
For BibTeX
References
- D. A. Liakin, “The Analysis of the Electron Beam Scanning Method for the Beam Profile Monitoring.”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT099, pp. 2721-2723.
- M. Bousonville, C. Christou, P. Hülsmann, S. Karau, and S. Vilcins, “Realisation of a 1.5 GHz single mode cavity for PETRA IV”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB086, this conference.
- T. Hellert et al., “Status of the Advanced Light Source”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG37, pp. 1309-1312.
- Y. Yang et al., “A high brightness electron beam research and application beamline at Tsinghua University”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL152, pp. 2093-2096.
- J. A. MacLachlan, “400 MeV Upgrade for the Fermilab Linac”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 950-953.
- V. Popov, S. M. Hartman, S. Mikhailov, O. Oakeley, P. W. Wallace, and Y. K. Wu, “Trim Power Supplies for the Duke Booster and Storage Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE074, pp. 3919-3921.
- E. Gray, A. Shapiro, and G. Spalek, “A Radio-Frequency Quadrupole Accelerator Longitudinal Field Stabilizer”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-34, pp. 122-124.
- C. Belver-Aguilar, A. Faus-Golfe, M. J. Barnes, and F. Toral, “Final Cross Section Design of the Stripline Kicker for the CLIC Damping Rings”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR016, pp. 1843-1845.
- P. Bagley, “Beam Beam Tune Shifts for 36 Bunch Operation in the Tevatron”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP048L, pp. 1155-1157.
- D. E. Kim, C. W. Chung, I. S. Ko, J.-S. Oh, and K.-H. Park, “Physics Requirement of a PLS-XFEL Undulator”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS132, pp. 3592-3594.
- J. B. Murphy et al., “Commissioning of the Phase I Superconducting X-Ray lithography Source (SXLS) at BNL”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1107-1110.
- J. Klingmann et al., “Fabrication of DDS-3, an 11.4 GHz Damped-Detuned Structure”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP51, pp. 777-779.
- Z. Shen et al., “High Intensity Ion Beam Extraction System for FECR”, presented at the 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper WEXZO01, unpublished.
- G. R. Werner et al., “Voltage Breakdown on Niobium and Copper Surfaces”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper MA005, pp. XX-XX.
- T. Mastorides et al., “LHC Beam Diffusion Dependence on RF Noise: Models and Measurements”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA062, pp. 1476-1478.
- K. L. F. Bane, C. Adolphsen, and C. D. Nantista, “RF Distribution Optimization in the Main Linacs of the ILC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS037, pp. 2424-2426.
- K. Torikai et al., “Induction Accelerating Cavity for a Circular Ring Accelerator”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT066, pp. 704-706.
- R. R. Lindberg, K.-J. Kim, Y. Cai, Y. Ding, and Z. Huang, “Transverse Gradient Undulators for a Storage Ring X-ray FEL Oscillator”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper THOBNO02, pp. 740-748.
- O. Makarov, B. Deriy, L. Emery, S. Sasaki, R. Soliday, and I. Vasserman, “Feedforward Correction of the Pulsed Circularly Polarizing Undulator at the Advanced Photon Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAG001, pp. 2261-2263.
- Y. U. Jeong, S. H. Park, B. C. Lee, H. J. Cha, and G. M. Kazakevitch, “Compact Terahertz Free-Electron Laser as a Users Facility”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper FRM103, pp. XX-XX.
- Q. Wu, L. T. Sun, and H. W. Zhao, “Development of 2.45 GHz ECR Ion Source at IMP”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 195-197.
- K. A. Brown et al., “A Scanning Target Profile Monitor for the Slow Extracted Beam at the AGS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P046, pp. 2149-2151.
- M. Arnold et al., “ERL Operation of S-DALINAC”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 1-4.
- H. A. Duerr et al., “XPS Studies of Cs2Te Photocathodes”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper WEPPH048, pp. 457-460.
- V. Popov, S. M. Hartman, S. Mikhailov, O. Oakeley, P. W. Wallace, and Y. K. Wu, “3 kA Power Supplies for the Duke OK-5 FEL Wigglers”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE073, pp. 3901-3903.
- C. D. Marshall et al., “National Ignition Facility Control and Information System Operational Tools”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUA003, pp. 52-54.
- L. S. Cowie et al., “An X-Band Lineariser for the CLARA FEL”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3848-3851.
- S. Schreiber et al., “Improved Operation of the TTF Photoinjector for FEL Operation”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI052, pp. 1804-1806.
- D. B. Bazyl, H. De Gersem, W. F. O. M??ller, J. Enders, and S. Weih, “A 3 GHz SRF Reduced-beta Cavity for the S-DALINAC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3838-3840.
- G. Guignard, “A Lattice with No Transition and Large Dynamic Aperture”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 915-918.
- B. T. McCuistian et al., “Temporal Spot Size Evolution of the DARHT First Axis Radiographic Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC066, pp. 1206-1208.
- E. G. Sandels, R. A. Church, I. S. K. Gardner, and H. C. Whitby, “A 2nd RF System for Nimrod”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 418-422.
- O. B. Malyshev et al., “Mechanical and Vacuum Design of the Wiggler Section of the ILC Damping Rings”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE092, pp. 3563-3565.
- V. Gubaidulin, A. Gamelin, and R. Nagaoka, “Beam-ion Instabilities and Their Mitigation for SOLEIL II”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA004, pp. 2650-2653.
- J. C. Jan et al., “Magnetic Field Character of TPS Booster Magnets”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME037, pp. 3594-3596.
- G. N. Kim et al., “Nuclear Data Measurements with a Pulsed Neutron Facility based on an Electron Linac”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB068, pp. 430-432.
- I. P. S. Martin et al., “Progress with the Booster Design for the Diamond-II Upgrade”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 286-289.
- S. Ramamoorthy, P. Pearson, and J. Smith, “Error Handling in the NSLS Control System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPR07, pp. 2250-2252.
- H. Huang et al., “Strategy for proton polarization in the Electron Ion Collider”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL011, pp. 523-526.
- C. Christou, V. C. Kempson, and S. J. Singleton, “Enhancements to the Diamond Light Source Pre-Injector Linac”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP030, pp. 459-461.
- C.-K. Chang et al., “Logging of Operation Data at TLS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN090, pp. 371-373.
- A. Lumpkin and B. Yang, “Status of the Synchrotron Radiation Monitors for the APS Facility Rings”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ09, pp. 2470-2472.
- W. H. Li et al., “Ultrafast Nonlinear Photoemission from Alkali Antimonide Photocathodes”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 203-206.
- M. Akemoto, S. Gold, A. Krasnykh, and R. Koontz, “Design of a PFN for the NLC Klystron Pulse Modulator”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D038, pp. 175-177.
- T. Xin et al., “Performance of 112 MHz SRF Gun at BNL”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1223-1227.
- T. Hoffmann and H. Br?ñuning, “REMBRANDT - REMote Beam instRumentation And Network Diagnosis Tool”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC006, pp. 1103-1106.
- F.-T. Chung et al., “Energy-Savings for the TPS Booster RF System at the NSRRC in Taiwan”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3748-3750.
- S. V. Barabin, A. V. Kozlov, T. Kulevoy, D. A. Liakin, A. Y. Lukashin, and D. N. Selesnev, “Pepper-Pot Emittance Metasurements”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 443-445.
- A. E. Candel et al., “Parallel Higher-Order Finite Element Method for Accurate Field Computations in Wakefield and PIC Simulations”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WEMPMP03, pp. 176-181.
- B. Taylor, H. Lancaster, and H. Hoag, “Engineering Design of the Injector Linac for the Advanced Light Source (ALS)”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-16, pp. 565-567.
- D. L. Judd et al., “Concepts, Features, and Design of a Sixteen-to-Four Beam Combiner for ILSE”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 968-971.
- M. Santana-Leitner, Y. Nosochkov, and T. O. Raubenheimer, “MadFLUKA Beam Line 3D Builder. Simulation of Beam Loss Propagation in Accelerators”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 463-465.
- X. He, S. Q. Liao, J. Long, J. Shi, W. Wang, and L. Yang, “A Proposal of using Improved Rhodotron as a High Dose Rate Micro-focused X-ray Source”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 143-145.
- H. A. Koivisto et al., “Electron Cyclotron Resonance Ion Source Related Research and Development Work at the Department of Physics, University of Jyväskylä (JYFL)”, in Proc. 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper TUZZO02, pp. 98-101.
- H. Ao et al., “High Power Model Fabrication of Biperiodic L-support Disk-and-Washer Structure”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUA22, pp. 431-433.
- V. N. Pavlenko et al., “Characterization of Femtosecond-Laser-Induced Electron Emission from Diamond Nano-Tips”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 228-231.
- C. M. Lyneis, J. Y. Benitez, M. M. Strohmeier, and D. S. Todd, “Coupling Microwave Power into ECR Ion Source Plasmas at Frequencies above 20 GHz”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper TUXO01, pp. XX-XX.
- J. Caporaso, “Transmission Line Analysis of Beam Deflection in a BPM Stripline Kicker”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9V041, pp. 1861-1863.
- S. Heifets and R. Rossmanith, “High Repetition Rate Kickers for Linear Colliders”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-09, pp. 547-549.
- K. Yamamoto et al., “Radiation Level in the J-PARC Rapid Cycling Synchrotron after First Study”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC133, pp. 382-384.
- R. Bartolini et al., “Overview of Accelerator Physics Studies and High Level Software for the Diamond Light Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE052, pp. 3188-3190.
- S. E. Sampayan et al., “Burst Mode FEL with the ETA-III Induction Linac”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1554-1557.
Back to search