Favourites
For Word
[n] T. Hezel et al., “Experimental Results with a Novel Superconductive In-Vacuum Mini-Undulator Test Device at the Mainz Microtron MAMI”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUAR5, pp. 165-167.
[n] J. R. Delayen, J. Mammosser, and O. Ozelis, “Analysis of the Qualification-Tests Performance of the Superconducting Cavities for the SNS Linac”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP81, pp. 210-212.
[n] S. De Silva et al., “Sensitivity analysis of the 197 MHz prototype crab cavity for EIC”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1749-1752. doi:10.18429/JACoW-IPAC2025-WEPB014
[n] A. Díaz Rosales, M. Di Castro, and H. Gamper, “Control Design Optimisations of Robots for the Maintenance and Inspection of Particle Accelerators”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 153-159. doi:10.18429/JACoW-ICALEPCS2023-MO3AO07
[n] V. Senaj, T. Kramer, M. Sack, and A. A. del Barrio Monta???®s, “Sub-Nanosecond Switching of HV SiC MOS Transistors for Impact Ionisation Triggering”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4454-4456. doi:10.18429/JACoW-IPAC2021-THPAB340
[n] F. Yan et al., “The investigation of cavity frequency instability induced by vibrations”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 184-186. doi:10.18429/JACoW-IPAC2023-MOPA068
[n] R. Geometrante, “Building a Global, Collaborative Accelerator Economy: Summary of the IPAC 2022 Industrial Session”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper MOODE3, unpublished.
[n] A. Colinet et al., “The consolidation of the interlock systems for the CERN North Area”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4101-4104. doi:10.18429/JACoW-IPAC2023-THPA061
[n] J. J. Jamroz, J. Cereijo Garc?¡a, T. Korhonen, and J. H. Lee, “Timing System Integration with MTCA at ESS”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1265. doi:10.18429/JACoW-ICALEPCS2019-WEPHA071
[n] N. S. Mirian, L. Giannessi, and S. Spampinati, “FEL Pulse Shortening by Superradiance at FERMI”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 38-41. doi:10.18429/JACoW-FEL2017-MOP005
[n] I. Drebot et al., “Brixsino high-flux dual X-ray and THz radiation source based on energy recovery linacs”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2123-2126. doi:10.18429/JACoW-IPAC2023-TUPL162
[n] R. P. Johnson et al., “High Pressure, High Gradient RF Cavities for Muon Beam Cooling”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TU203, pp. 266-270.
[n] J. Szczesny, J. Bobnar, P. Duval, T. Kosuge, M. Lomperski, and H. Wu, “ACOP.?áNET : Not Just Another GUI Builder”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 139-143. doi:10.18429/JACoW-PCaPAC2018-THCB1
[n] A. Kilicgedik et al., “Manufacturing and testing of the 800 MHz RFQ at KAHVELab”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 866-868. doi:10.18429/JACoW-IPAC2023-MOPL136
[n] H. Weise and W. Decking, “Commissioning and First Lasing of the European XFEL”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 9-13. doi:10.18429/JACoW-FEL2017-MOC03
[n] C. Kondo, T. Inagaki, T. Sakurai, T. Shintake, and K. Shirasawa, “EMI Noise Suppression in the Klystron Pulse Power Supply for XFEL/SPring-8”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD059, pp. 3230-3232.
[n] M. Kinsho, Z. Kabeya, N. Ogiwara, and Y. Saito, “Alumina Ceramics Vacuum Duct for the 3GeV-RCS of the J-PARC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE039, pp. 2604-2606.
[n] C. B. Bigham, T. K. Alexander, R. J. Burton, E. A. Heighway, J. E. McGregor, and E. P. Stock, “First Operation of the TASCC Beam Bunching System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2763-2766.
[n] C. Kondo, T. Inagaki, T. Sakurai, T. Shintake, and K. Shirasawa, “Cooling System Design of Compact Klystron Modulator Power Supply in the XFEL Project at SPring-8”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP085, pp. 987-989.
[n] W. Cichalewski et al., “Firmware Layer Implementation of the nBLM and icBLM Systems for ESS Project”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1158. doi:10.18429/JACoW-ICALEPCS2019-WEPHA035
[n] T. Nishi et al., “Development of automatic beam tuning system using Bayesian optimization for high intensity heavy ion beams at RIBF”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 148-151. doi:10.18429/JACoW-HIAT2025-TUP09
For LaTeX
Use Complete Form
For BibTeX
References
- T. Hezel et al., “Experimental Results with a Novel Superconductive In-Vacuum Mini-Undulator Test Device at the Mainz Microtron MAMI”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUAR5, pp. 165-167.
- J. R. Delayen, J. Mammosser, and O. Ozelis, “Analysis of the Qualification-Tests Performance of the Superconducting Cavities for the SNS Linac”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper MOP81, pp. 210-212.
- S. De Silva et al., “Sensitivity analysis of the 197 MHz prototype crab cavity for EIC”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB014, pp. 1749-1752.
- A. Díaz Rosales, M. Di Castro, and H. Gamper, “Control Design Optimisations of Robots for the Maintenance and Inspection of Particle Accelerators”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO3AO07, pp. 153-159.
- V. Senaj, T. Kramer, M. Sack, and A. A. del Barrio Monta???®s, “Sub-Nanosecond Switching of HV SiC MOS Transistors for Impact Ionisation Triggering”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4454-4456.
- F. Yan et al., “The investigation of cavity frequency instability induced by vibrations”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA068, pp. 184-186.
- R. Geometrante, “Building a Global, Collaborative Accelerator Economy: Summary of the IPAC 2022 Industrial Session”, presented at the North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, paper MOODE3, unpublished.
- A. Colinet et al., “The consolidation of the interlock systems for the CERN North Area”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA061, pp. 4101-4104.
- J. J. Jamroz, J. Cereijo Garc?¡a, T. Korhonen, and J. H. Lee, “Timing System Integration with MTCA at ESS”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1265.
- N. S. Mirian, L. Giannessi, and S. Spampinati, “FEL Pulse Shortening by Superradiance at FERMI”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 38-41.
- I. Drebot et al., “Brixsino high-flux dual X-ray and THz radiation source based on energy recovery linacs”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL162, pp. 2123-2126.
- R. P. Johnson et al., “High Pressure, High Gradient RF Cavities for Muon Beam Cooling”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TU203, pp. 266-270.
- J. Szczesny, J. Bobnar, P. Duval, T. Kosuge, M. Lomperski, and H. Wu, “ACOP.?áNET : Not Just Another GUI Builder”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 139-143.
- A. Kilicgedik et al., “Manufacturing and testing of the 800 MHz RFQ at KAHVELab”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL136, pp. 866-868.
- H. Weise and W. Decking, “Commissioning and First Lasing of the European XFEL”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 9-13.
- C. Kondo, T. Inagaki, T. Sakurai, T. Shintake, and K. Shirasawa, “EMI Noise Suppression in the Klystron Pulse Power Supply for XFEL/SPring-8”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD059, pp. 3230-3232.
- M. Kinsho, Z. Kabeya, N. Ogiwara, and Y. Saito, “Alumina Ceramics Vacuum Duct for the 3GeV-RCS of the J-PARC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE039, pp. 2604-2606.
- C. B. Bigham, T. K. Alexander, R. J. Burton, E. A. Heighway, J. E. McGregor, and E. P. Stock, “First Operation of the TASCC Beam Bunching System”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2763-2766.
- C. Kondo, T. Inagaki, T. Sakurai, T. Shintake, and K. Shirasawa, “Cooling System Design of Compact Klystron Modulator Power Supply in the XFEL Project at SPring-8”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP085, pp. 987-989.
- W. Cichalewski et al., “Firmware Layer Implementation of the nBLM and icBLM Systems for ESS Project”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1158.
- T. Nishi et al., “Development of automatic beam tuning system using Bayesian optimization for high intensity heavy ion beams at RIBF”, in Proc. 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper TUP09, pp. 148-151.
Back to search
