Favourites
For Word
[n] H. Hahn and R. C. Fernow, “Superconducting Combined Function Magnets”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3402-3405.
[n] C. Antuono et al., “Beam impedance investigation of the elliptical interconnecting vacuum modules of the LHC and prospect for HL-LHC”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPM075, unpublished.
[n] V. Kashikhin et al., “Field Quality of the Fermilab Nb3Sn Cos-theta Dipole Models”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE020, pp. 2403-2405.
[n] A. V. Zlobin et al., “Development of Cos-Theta Nb3Sn Dipole Magnets for VLHC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH085, pp. 3427-3429.
[n] G. R. White, D. Schulte, and N. J. Walker, “Design and Simulation of the ILC Intra-train Orbit and Luminosity Feedback Systems”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH104, pp. 3041-3043.
[n] V. Kashikhin et al., “Field Quality Study in Nb3Sn Accelerator Magnets”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOAA004, pp. 366-368.
[n] Y. Ohnishi et al., “Optics Measurements and Corrections at the Early Commissioning of SuperKEKB”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3782-3784. doi:10.18429/JACoW-IPAC2016-THPOR007
[n] R. C. Fernow and J. C. Gallardo, “Front-End Design Studies for a Muon Collider”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP040, pp. 2610-2612.
[n] A. Wu, “Investigation of Oxide Layer Structure on Niobium Surfaces Using a Secondary Ion Mass Spectrometer”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP08, pp. 251-253.
[n] P. Bauer et al., “Analysis of the b2 Correction in the Tevatron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB055, pp. 1730-1732.
[n] V. V. Kashikhin and A. V. Zlobin, “Nb3Sn Arc Quadrupole Magnets for VLHC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH080, pp. 3412-3414.
[n] M. G. Billing, M. J. Forster, and H. A. Williams, “Model Independent Analysis with Coupled Beam Motion”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP028, pp. 3759-3761.
[n] D. F. Orris and R. Carcagno, “A Modular and Extensible Data Acquisition and Control System for Testing Superconducting Magnets”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH098, pp. 3463-3465.
[n] M. G. Billing et al., “Measurement Techniques to Characterize Instabilities Caused by Electron Clouds”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP194, pp. 1852-1854.
[n] E. Donoghue et al., “Studies of Electron Activities in SNS-Type Superconducting RF Cavities”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP67, pp. 402-405.
[n] G. R. White, S. Molloy, and M. Woodley, “Beam-Based Alignment, Tuning and Beam Dynamics Studies for the ATF2 Extraction Line and Final Focus System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP039, pp. 634-636.
[n] B. Zhang, C. Chen, X. Li, S. Wang, and R. Yang, “Preliminary commissioning results of the LW prototype at CSNS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM055, unpublished.
[n] J. M. Nogiec et al., “A Highly Configurable and Scriptable Software System for Fully Automated Tuning of Accelerator Cavities”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA15, pp. 1262-1264.
[n] J. Henderson, D. J. Dunning, and B. W. J. McNeil, “Beam Quality and Transport Stability Simulations in Echo Enabled Harmonic Generation”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper MOPB32, pp. 99-102.
[n] ?à. Andersson, O. V. Chubar, A. Luedeke, M. Rohrer, V. Schlott, and A. Streun, “Recent Results from the Electron Beam Profile Monitor at the Swiss Light Source”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB27, pp. 129-131.
[n] T. Margreiter et al., “Magnetic field control in the MedAustron synchrotron”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM001, unpublished.
[n] B. Lam et al., “ATF2 High Availability Power Supplies”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP127, pp. 3658-3660.
[n] P. Schlabach et al., “Field Quality of the Fermilab Nb3Sn High Field Dipole Model”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH082, pp. 3418-3420.
[n] L. Hansborough, E. Bush, and V. Hart, “Mechanical Technologies for PIGMI”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3770-3773.
[n] B. F. Milton et al., “First Beam in a New Compact Intense 30 MeVH- cyclotron for Isotope Production”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1812-1815.
[n] F. Eoz?®nou et al., “Vertical Electro-Polishing of 704 MHz Resonators Using Ninja Cathode: First Results”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 431. doi:10.18429/JACoW-SRF2021-TUPCAV001
[n] N. Y. Joshi et al., “Analysis of RF System Stability on CLARA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4053-4056. doi:10.18429/JACoW-IPAC2019-THPRB097
[n] H. Jang, D. H. Gil, Y. Jung, H. Kim, Y. Kim, and M. Lee, “Development of a Digital LLRF System for SRF Cavities in RAON Accelerator”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 845. doi:10.18429/JACoW-SRF2021-THPTEV008
[n] R. C. Fernow, “Recent Developments on the Muon-Facility Design Code ICOOL”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP041, pp. 2651-2653.
[n] R. B. Britton, “Flux Pumps for Use at 60 Hz”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 681-683.
[n] F. Briquez et al., “Construction of Short Period APPLE II Type Undulators at SOLEIL”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH015, pp. 265-268.
[n] G. Papotti et al., “Operation of the LHC with Protons at High Luminosity and High Energy”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2066-2069. doi:10.18429/JACoW-IPAC2016-WEOCA01
[n] S. Chevtsov et al., “Operational Tools at the Stanford Linear Accelerator Center”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WOAB01, pp. 288-292.
[n] S. Calatroni, “20 Years of Experience with the Nb/Cu Technology for Superconducting Cavities and Perspectives for Future Developments”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper MOP11, pp. 149-154.
[n] G. Lanza et al., “The HIE-ISOLDE Superconducting Cavities: Surface Treatment and Niobium Thin Film Coating”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO075, pp. 801-805.
[n] J. Henderson, A. C. Dexter, A. J. Moss, and E. W. Snedden, “Laser-to-RF Synchronisation Drift Compensation for the CLARA test facility”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 87-90. doi:10.18429/JACoW-LINAC2022-MOPOPA11
[n] G. R. White, “Feedback on Nanosecond Timescales: Fast Feedback Simulations”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB026, pp. 2778-2780.
[n] P. Bauer, G. Ambrosio, L. Imbasciati, V. V. Kashikhin, M. Lamm, and A. V. Zlobin, “Quench Protection of High Field Nb3Sn Magnets for VLHC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH095, pp. 3454-3456.
[n] C. N. Booth, L. C. Howlett, N. Schofield, and P. J. Smith, “The Target Drive for the MICE Experiment”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS005, pp. 2403-2405.
[n] P. Bauer et al., “Proposals for Improvements of the Correction of Sextupole Dynamic Effects in the Tevatron Dipole Magnets”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT120, pp. 818-820.
[n] A. V. Zlobin et al., “Storage Ring and Interaction Region Magnets for a +- Higgs Factory”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA19, pp. 1271-1273.
[n] T. Fujita, T. Masuda, S. Sasaki, and H. Sumitomo, “Fast Beam Orbit Monitoring System during Beam Abort at SPring-8 Storage Ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 274-276. doi:10.18429/JACoW-IPAC2014-MOPRO080
[n] G. R. White, D. Schulte, and N. J. Walker, “TESLA Linac-IP Simulations”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT108, pp. 788-790.
[n] G. R. White and T. O. Raubenheimer, “Tolerances for Plasma Wakefield Acceleration Drivers”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 614-617. doi:10.18429/JACoW-NAPAC2019-WEYBA3
[n] D. F. Orris et al., “Fast Thermometry for Superconducting RF Cavity Testing”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN105, pp. 2280-2282.
[n] V. V. Kashikhin and A. V. Zlobin, “Single-Layer High Field Dipole Magnets”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH081, pp. 3415-3417.
[n] J. S. Park et al., “Performance Improvement of KSTAR Networks for Long Distance Collaborations”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC133, pp. 423-426.
[n] J. Henderson, L. T. Campbell, B. W. J. McNeil, and A. R. Maier, “The Implementation of 3D Undulator Fields in the Unaveraged FEL Simulation Code Puffin”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP022, pp. 416-418.
[n] N. Walker, D. Schulte, and G. R. White, “Intra-Bunch-Train Luminosity Optimisation for the TESLA Linear Collider”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB006, pp. 2733-2735.
[n] C. Kurfuerst et al., “Radiation Tolerance of Cryogenic Beam Loss Monitor Detectors”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA044, pp. 3240-3242.
[n] E. S. McCrory et al., “LHC@FNAL: A Remote Access Center for the LHC at Fermilab”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH098, pp. 267-269.
[n] M. J. Barnes et al., “Operational Experience of the Upgraded LHC Injection Kicker Magnets”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3623-3626. doi:10.18429/JACoW-IPAC2016-THPMW033
[n] S. Lee, J. S. Hong, J. S. Park, M. K. Park, and S. W. Yun, “Management Tools for Distributed Control System in KSTAR”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEMMU006, pp. 694-697.
[n] G. R. White, “Reconstruction of IP Beam Parameters at the ILC from Beamstraahlung”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP015, pp. 1446-1448.
[n] P. Burrows et al., “Design of the ILC Prototype FONT4 Digital Intra-train Beam-based Feedback System”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS122, pp. 849-851.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Hahn and R. C. Fernow, “Superconducting Combined Function Magnets”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3402-3405.
- C. Antuono et al., “Beam impedance investigation of the elliptical interconnecting vacuum modules of the LHC and prospect for HL-LHC”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPM075, this conference.
- V. Kashikhin et al., “Field Quality of the Fermilab Nb3Sn Cos-theta Dipole Models”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE020, pp. 2403-2405.
- A. V. Zlobin et al., “Development of Cos-Theta Nb3Sn Dipole Magnets for VLHC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH085, pp. 3427-3429.
- G. R. White, D. Schulte, and N. J. Walker, “Design and Simulation of the ILC Intra-train Orbit and Luminosity Feedback Systems”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH104, pp. 3041-3043.
- V. Kashikhin et al., “Field Quality Study in Nb3Sn Accelerator Magnets”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOAA004, pp. 366-368.
- Y. Ohnishi et al., “Optics Measurements and Corrections at the Early Commissioning of SuperKEKB”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3782-3784.
- R. C. Fernow and J. C. Gallardo, “Front-End Design Studies for a Muon Collider”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP040, pp. 2610-2612.
- A. Wu, “Investigation of Oxide Layer Structure on Niobium Surfaces Using a Secondary Ion Mass Spectrometer”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP08, pp. 251-253.
- P. Bauer et al., “Analysis of the b2 Correction in the Tevatron”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB055, pp. 1730-1732.
- V. V. Kashikhin and A. V. Zlobin, “Nb3Sn Arc Quadrupole Magnets for VLHC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH080, pp. 3412-3414.
- M. G. Billing, M. J. Forster, and H. A. Williams, “Model Independent Analysis with Coupled Beam Motion”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP028, pp. 3759-3761.
- D. F. Orris and R. Carcagno, “A Modular and Extensible Data Acquisition and Control System for Testing Superconducting Magnets”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH098, pp. 3463-3465.
- M. G. Billing et al., “Measurement Techniques to Characterize Instabilities Caused by Electron Clouds”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP194, pp. 1852-1854.
- E. Donoghue et al., “Studies of Electron Activities in SNS-Type Superconducting RF Cavities”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP67, pp. 402-405.
- G. R. White, S. Molloy, and M. Woodley, “Beam-Based Alignment, Tuning and Beam Dynamics Studies for the ATF2 Extraction Line and Final Focus System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP039, pp. 634-636.
- B. Zhang, C. Chen, X. Li, S. Wang, and R. Yang, “Preliminary commissioning results of the LW prototype at CSNS”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM055, this conference.
- J. M. Nogiec et al., “A Highly Configurable and Scriptable Software System for Fully Automated Tuning of Accelerator Cavities”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA15, pp. 1262-1264.
- J. Henderson, D. J. Dunning, and B. W. J. McNeil, “Beam Quality and Transport Stability Simulations in Echo Enabled Harmonic Generation”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper MOPB32, pp. 99-102.
- ?à. Andersson, O. V. Chubar, A. Luedeke, M. Rohrer, V. Schlott, and A. Streun, “Recent Results from the Electron Beam Profile Monitor at the Swiss Light Source”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB27, pp. 129-131.
- T. Margreiter et al., “Magnetic field control in the MedAustron synchrotron”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM001, this conference.
- B. Lam et al., “ATF2 High Availability Power Supplies”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP127, pp. 3658-3660.
- P. Schlabach et al., “Field Quality of the Fermilab Nb3Sn High Field Dipole Model”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH082, pp. 3418-3420.
- L. Hansborough, E. Bush, and V. Hart, “Mechanical Technologies for PIGMI”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3770-3773.
- B. F. Milton et al., “First Beam in a New Compact Intense 30 MeVH- cyclotron for Isotope Production”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1812-1815.
- F. Eoz?®nou et al., “Vertical Electro-Polishing of 704 MHz Resonators Using Ninja Cathode: First Results”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 431.
- N. Y. Joshi et al., “Analysis of RF System Stability on CLARA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4053-4056.
- H. Jang, D. H. Gil, Y. Jung, H. Kim, Y. Kim, and M. Lee, “Development of a Digital LLRF System for SRF Cavities in RAON Accelerator”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 845.
- R. C. Fernow, “Recent Developments on the Muon-Facility Design Code ICOOL”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP041, pp. 2651-2653.
- R. B. Britton, “Flux Pumps for Use at 60 Hz”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 681-683.
- F. Briquez et al., “Construction of Short Period APPLE II Type Undulators at SOLEIL”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH015, pp. 265-268.
- G. Papotti et al., “Operation of the LHC with Protons at High Luminosity and High Energy”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2066-2069.
- S. Chevtsov et al., “Operational Tools at the Stanford Linear Accelerator Center”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WOAB01, pp. 288-292.
- S. Calatroni, “20 Years of Experience with the Nb/Cu Technology for Superconducting Cavities and Perspectives for Future Developments”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper MOP11, pp. 149-154.
- G. Lanza et al., “The HIE-ISOLDE Superconducting Cavities: Surface Treatment and Niobium Thin Film Coating”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO075, pp. 801-805.
- J. Henderson, A. C. Dexter, A. J. Moss, and E. W. Snedden, “Laser-to-RF Synchronisation Drift Compensation for the CLARA test facility”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 87-90.
- G. R. White, “Feedback on Nanosecond Timescales: Fast Feedback Simulations”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB026, pp. 2778-2780.
- P. Bauer, G. Ambrosio, L. Imbasciati, V. V. Kashikhin, M. Lamm, and A. V. Zlobin, “Quench Protection of High Field Nb3Sn Magnets for VLHC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH095, pp. 3454-3456.
- C. N. Booth, L. C. Howlett, N. Schofield, and P. J. Smith, “The Target Drive for the MICE Experiment”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS005, pp. 2403-2405.
- P. Bauer et al., “Proposals for Improvements of the Correction of Sextupole Dynamic Effects in the Tevatron Dipole Magnets”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT120, pp. 818-820.
- A. V. Zlobin et al., “Storage Ring and Interaction Region Magnets for a +- Higgs Factory”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA19, pp. 1271-1273.
- T. Fujita, T. Masuda, S. Sasaki, and H. Sumitomo, “Fast Beam Orbit Monitoring System during Beam Abort at SPring-8 Storage Ring”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 274-276.
- G. R. White, D. Schulte, and N. J. Walker, “TESLA Linac-IP Simulations”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT108, pp. 788-790.
- G. R. White and T. O. Raubenheimer, “Tolerances for Plasma Wakefield Acceleration Drivers”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 614-617.
- D. F. Orris et al., “Fast Thermometry for Superconducting RF Cavity Testing”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN105, pp. 2280-2282.
- V. V. Kashikhin and A. V. Zlobin, “Single-Layer High Field Dipole Magnets”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH081, pp. 3415-3417.
- J. S. Park et al., “Performance Improvement of KSTAR Networks for Long Distance Collaborations”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC133, pp. 423-426.
- J. Henderson, L. T. Campbell, B. W. J. McNeil, and A. R. Maier, “The Implementation of 3D Undulator Fields in the Unaveraged FEL Simulation Code Puffin”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP022, pp. 416-418.
- N. Walker, D. Schulte, and G. R. White, “Intra-Bunch-Train Luminosity Optimisation for the TESLA Linear Collider”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB006, pp. 2733-2735.
- C. Kurfuerst et al., “Radiation Tolerance of Cryogenic Beam Loss Monitor Detectors”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA044, pp. 3240-3242.
- E. S. McCrory et al., “LHC@FNAL: A Remote Access Center for the LHC at Fermilab”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH098, pp. 267-269.
- M. J. Barnes et al., “Operational Experience of the Upgraded LHC Injection Kicker Magnets”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3623-3626.
- S. Lee, J. S. Hong, J. S. Park, M. K. Park, and S. W. Yun, “Management Tools for Distributed Control System in KSTAR”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEMMU006, pp. 694-697.
- G. R. White, “Reconstruction of IP Beam Parameters at the ILC from Beamstraahlung”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPP015, pp. 1446-1448.
- P. Burrows et al., “Design of the ILC Prototype FONT4 Digital Intra-train Beam-based Feedback System”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS122, pp. 849-851.
Back to search