Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. L. Sabbi, A. Faltens, A. F. Lietzke, N. Martovetski, S. Mattafirri, and P. A. Seidl, “Field Quality Optimization of Superconducting Quadrupoles for the HCX Experiment”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper TOAA005, unpublished.
[n] J. B. Fitzgerald, B. G. Martlew, C. Morrell, and S. L. Smith, “The Daresbury Global Horizontal Servo Feedback System: Status and Outlook”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP019L, pp. 1848-1850.
[n] A. Krusche and M. Paoluzzi, “The New Low Frequency Accelerating Systems for the CERN PS Booster”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP03H, pp. 1782-1783.
[n] L. N. Hand and S. Lundgren, “The Design of Low Emittance Electron Storage Rings”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 456-459.
[n] E. Paoloni, S. Bettoni, M. E. Biagini, and P. Raimondi, “Magnetic Design Studies for the Final Focus Quadrupoles of the SuperB Large Crossing Angle Collision Scheme”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD002, pp. 2401-2403.
[n] B. Aune et al., “Towards a 12 GeV Electron Accelerator for Nuclear Physics with a 100% Duty Cycle”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH427, pp. 659-661.
[n] F. Zhou et al., “Emittance Growth due to the Laser Non-uniformity in a Photoinjector”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUAGB003, pp. 275-277.
[n] B. W. J. McNeil, D. J. Dunning, G. R. M. Robb, and N. Thompson, “FELO: A One-Dimensional Time-Dependent FEL Oscillator Code”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH011, pp. 59-62.
[n] L. Bartelson et al., “A Second Long Pulse Modulator for TESLA Using IGBTs”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP048G, pp. 2585-2587.
[n] G. L. Sabbi, “Magnet Development for LARP”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRXKI02, pp. 3737-3737.
[n] S. Assadi, “SNS Transverse and Longitudinal Laser Profile Monitors Design, Implementation and Results”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH156, pp. 3161-3163.
[n] T. A. Enegren, J. Griffin, R. Poirier, W. R. Smythe, H. A. Thiessen, and L. Walling, “Higher-Order Mode Damping in KAON Factory RF Cavities”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 196-199.
[n] M. El Khaldi, M. Alkadi, C. Bruni, L. Garolfi, A. Gonnin, and H. Monard, “Design Study of High Gradient Compact S-band TW Accelerating Structure for the ThomX LINAC Upgrade”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2807-2810. doi:10.18429/JACoW-IPAC2019-WEPRB008
[n] B. C. Kuske and M. Abo-Bakr, “Optics Development and Trajectory Tuning of BERLinPro at Low Energies”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 153-155. doi:10.18429/JACoW-IPAC2017-MOPAB033
[n] A. Browman, L. N. Hand, G. Rouse, and T. Tso, “A Slow Extracted Beam for the Cornell 2 Ge V Synchrotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 260-262.
[n] N. P. Abreu, R. H. A. Farias, and P. F. Tavares, “RF Phase Modulation at the LNLS Electron Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP020, pp. 1686-1688.
[n] P. Kuske, H. -G Hoberg, J. Machado, R. Maier, and A. Schiele, “Beam Diagnostics Using Variations of Local Magnetic Fields”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1214-1217.
[n] A. Feschenko et al., “Longitudinal Beam Parameters Study in the SNS Linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THOAAB01, pp. 2608-2610.
[n] A. N. Zelenski et al., “Optically-Pumped Polarized H- Ion Sources for RHIC and HERA Colliders”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MODR6, pp. 106-108.
[n] A. Kisiel et al., “Diagnostic Beamlines at the Solaris Storage Ring”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 366-368. doi:10.18429/JACoW-IBIC2019-TUPP026
[n] D. Oshatz, A. DeMello, L. Doolittle, P. Luft, J. W. Staples, and A. Zachoszcz, “Mechanical Design of the SNS MEBT”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH152, pp. 1574-1576.
[n] J. T. Weir et al., “ETA-II Experiments for Determining Advanced Radiographic Capabilities of Induction Linacs”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9V022, pp. 1260-1262.
[n] D. Golob, U. Platise, M. Plesko, and M. Sekoranja, “I/O Cards with Built-in Linux and TCP/IP Become Turnkey Systems”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE615, pp. XX-XX.
[n] J. B. Jeanneret, E. Adli, A. Latina, G. Rumolo, D. Schulte, and R. Tomas, “Beam Dynamics Issues in the CLIC Long Transfer Line”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC018, pp. 3017-3019.
[n] D. Grier, E. Jensen, R. Losito, and A. Mitra, “The PS 80 MHz Cavities”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02H, pp. 1773-1775.
[n] B. D. Muratori and Y. M. Saveliev, “ALICE (ERLP) Injector Design”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC058, pp. 196-198.
[n] R. Maier, B. Seligmann, and H. J. Stein, “Electron Cooling in COSY-Juelich”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1580-1583.
[n] M. D. Cole et al., “Fabrication and Final Field Tuning of Copper Cavity Models for a High-Current SRF ERL at 703.75 MHz”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT091, pp. 4257-4259.
For LaTeX
Use Complete Form
For BibTeX
References
- G. L. Sabbi, A. Faltens, A. F. Lietzke, N. Martovetski, S. Mattafirri, and P. A. Seidl, “Field Quality Optimization of Superconducting Quadrupoles for the HCX Experiment”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOAA005, unpublished.
- J. B. Fitzgerald, B. G. Martlew, C. Morrell, and S. L. Smith, “The Daresbury Global Horizontal Servo Feedback System: Status and Outlook”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP019L, pp. 1848-1850.
- A. Krusche and M. Paoluzzi, “The New Low Frequency Accelerating Systems for the CERN PS Booster”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP03H, pp. 1782-1783.
- L. N. Hand and S. Lundgren, “The Design of Low Emittance Electron Storage Rings”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 456-459.
- E. Paoloni, S. Bettoni, M. E. Biagini, and P. Raimondi, “Magnetic Design Studies for the Final Focus Quadrupoles of the SuperB Large Crossing Angle Collision Scheme”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD002, pp. 2401-2403.
- B. Aune et al., “Towards a 12 GeV Electron Accelerator for Nuclear Physics with a 100% Duty Cycle”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH427, pp. 659-661.
- F. Zhou et al., “Emittance Growth due to the Laser Non-uniformity in a Photoinjector”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUAGB003, pp. 275-277.
- B. W. J. McNeil, D. J. Dunning, G. R. M. Robb, and N. Thompson, “FELO: A One-Dimensional Time-Dependent FEL Oscillator Code”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOPPH011, pp. 59-62.
- L. Bartelson et al., “A Second Long Pulse Modulator for TESLA Using IGBTs”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP048G, pp. 2585-2587.
- G. L. Sabbi, “Magnet Development for LARP”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRXKI02, pp. 3737-3737.
- S. Assadi, “SNS Transverse and Longitudinal Laser Profile Monitors Design, Implementation and Results”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH156, pp. 3161-3163.
- T. A. Enegren, J. Griffin, R. Poirier, W. R. Smythe, H. A. Thiessen, and L. Walling, “Higher-Order Mode Damping in KAON Factory RF Cavities”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 196-199.
- M. El Khaldi, M. Alkadi, C. Bruni, L. Garolfi, A. Gonnin, and H. Monard, “Design Study of High Gradient Compact S-band TW Accelerating Structure for the ThomX LINAC Upgrade”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2807-2810.
- B. C. Kuske and M. Abo-Bakr, “Optics Development and Trajectory Tuning of BERLinPro at Low Energies”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 153-155.
- A. Browman, L. N. Hand, G. Rouse, and T. Tso, “A Slow Extracted Beam for the Cornell 2 Ge V Synchrotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 260-262.
- N. P. Abreu, R. H. A. Farias, and P. F. Tavares, “RF Phase Modulation at the LNLS Electron Storage Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPP020, pp. 1686-1688.
- P. Kuske, H. -G Hoberg, J. Machado, R. Maier, and A. Schiele, “Beam Diagnostics Using Variations of Local Magnetic Fields”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1214-1217.
- A. Feschenko et al., “Longitudinal Beam Parameters Study in the SNS Linac”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THOAAB01, pp. 2608-2610.
- A. N. Zelenski et al., “Optically-Pumped Polarized H- Ion Sources for RHIC and HERA Colliders”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MODR6, pp. 106-108.
- A. Kisiel et al., “Diagnostic Beamlines at the Solaris Storage Ring”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 366-368.
- D. Oshatz, A. DeMello, L. Doolittle, P. Luft, J. W. Staples, and A. Zachoszcz, “Mechanical Design of the SNS MEBT”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH152, pp. 1574-1576.
- J. T. Weir et al., “ETA-II Experiments for Determining Advanced Radiographic Capabilities of Induction Linacs”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9V022, pp. 1260-1262.
- D. Golob, U. Platise, M. Plesko, and M. Sekoranja, “I/O Cards with Built-in Linux and TCP/IP Become Turnkey Systems”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE615, pp. XX-XX.
- J. B. Jeanneret, E. Adli, A. Latina, G. Rumolo, D. Schulte, and R. Tomas, “Beam Dynamics Issues in the CLIC Long Transfer Line”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC018, pp. 3017-3019.
- D. Grier, E. Jensen, R. Losito, and A. Mitra, “The PS 80 MHz Cavities”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP02H, pp. 1773-1775.
- B. D. Muratori and Y. M. Saveliev, “ALICE (ERLP) Injector Design”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC058, pp. 196-198.
- R. Maier, B. Seligmann, and H. J. Stein, “Electron Cooling in COSY-Juelich”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1580-1583.
- M. D. Cole et al., “Fabrication and Final Field Tuning of Copper Cavity Models for a High-Current SRF ERL at 703.75 MHz”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT091, pp. 4257-4259.
Back to search