Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Psoroulas, C. Bula, P. Fernandez Carmona, G. Klimpki, D. Meer, and D. C. Weber, “Challenges in Fast Beam Current Control Inside the Cyclotron for Fast Beam Delivery in Proton Therapy”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 126-129. doi:10.18429/JACoW-Cyclotrons2016-TUA02
[n] X. Altuna et al., “Acceleration of High Intensity Proton Beams”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA1, pp. 2617-2619.
[n] H. A. Koivisto, T. Ropponen, M. Savonen, and V. A. Toivanen, “Ion Beam Research and Development Work at JYFL”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOCO-B04, pp. 18-22.
[n] A. Gerbershagen, “Establishment of the New Particle Therapy Research Center (PARTREC) at UMCG Groningen”, presented at the Cyclotrons'22, Beijing, China, Dec. 2022, paper TUAO02, unpublished.
[n] S. De Santis, J. F. Beche, J. M. Byrd, M. Placidi, W. C. Turner, and M. S. Zolotorev, “Development of an Abort Gap Monitor for the Large Hadron Collider”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT143, pp. 2792-2794.
[n] P. Fernandez Carmona et al., “Continuous Beam Scanning Intensity Control of a Medical Proton Accelerator Using a Simulink Generated FPGA Gain Scheduled Controller”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 242-247. doi:10.18429/JACoW-PCaPAC2018-FRCC2
[n] M. Henstridge, A. S. Fisher, M. C. Hoffmann, and Z. Huang, “A Wiggler-based THz Source at LCLS-II and Studies for a 150-m THz Transport Line for Pump-probe Experiments”, presented at the FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, paper WE2A3, unpublished.
[n] M. Placidi et al., “Status of the LEP II Spectrometer Project”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP7B06, pp. 436-438.
[n] J. A. Farrell, “The Design of Periodic Beam Transport Systems”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2804-2806.
[n] A. G. Afonin, V. I. Baranov, Y. A. Chesnokov, V. A. Maisheev, V. Terekhov, and I. A. Yazynin, “Use of Bent-Crystal Deflectors to Steer Beam in U-70 Accelerator of IHEP - Status and Prospects”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEACH01, pp. 95-97.
[n] D. R. Bett et al., “Latest Performance Results from the FONT5 Intra-train Beam Position and Angle Feedback System at ATF2”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP068, pp. 2864-2866.
[n] A. Ferrari, G. R. Stevenson, and E. Weisse, “Design of the LHC Beam Dump”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1545-1548.
[n] R. Fliller III et al., “New Results from Crystal Collimation at RHIC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB034, pp. 1691-1693.
[n] F.-J. Decker, S. Colocho, A. Novokhatski, M. K. Sullivan, and U. Wienands, “Bunch Pattern with More Bunches in PEP-II”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT130, pp. 842-844.
[n] A. L. He et al., “Optimization of Rapid Magnetic Field Control of the CYCIAE-230 Cyclotron Beamline Magnets”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper MOPO019, pp. 106-109. doi:10.18429/JACoW-CYCLOTRONS2022-MOPO019
[n] A. Mosnier et al., “Present Status and Developments of the Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP075, pp. 3910-3912.
[n] Z. Li, S. De Silva, J. Delayen, R. Rimmer, Q. Wu, and B. Xiao, “EIC 197 MHz crab cavity HOM damping and tolerance analysis”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS137, unpublished.
[n] D. Shu, J. W. J. Anton, S. P. Kearney, A. Li, C. Mao, and Y. Pan, “Precision Mechanical Design of a Miniature Dynamic Mirror Bender for the SSRF Beamline Upgrade Project”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 108-111. doi:10.18429/JACoW-MEDSI2016-TUAA01
[n] J. Bahrdt, “Tracking of Wavefronts”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper FROB003, pp. XX-XX.
[n] S. Imajo et al., “Development of Ultracold Neutron Accelerator for Time Focusing of Pulsed Neutrons”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 56-58. doi:10.18429/JACoW-LINAC2016-MOOP07
[n] D. O. Tavares et al., “Commissioning and Optimization of the SIRIUS Fast Orbit Feedback”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 123-130. doi:10.18429/JACoW-ICALEPCS2023-MO3AO03
[n] X. Wang, H. Joehri, F. Loehl, M. Pedrozzi, and T. Stapf, “Structural Dynamic Modelling and Measurement of SwissFEL Bunch Compressor”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 128-132. doi:10.18429/JACoW-MEDSI2016-TUCA02
[n] M. Br?â and R. Wischnewski, “A Time Stamping TDC for SPEC and ZEN Platforms Based on White Rabbit”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1587-1589. doi:10.18429/JACoW-ICALEPCS2017-THPHA088
[n] T. C. Tseng et al., “Preliminary Active Vibration Elimination Study of the TPS Girder System”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 26-28. doi:10.18429/JACoW-MEDSI2016-MOPE11
[n] J. A. Nation, J. D. Ivers, G. S. Kerslick, L. Schachter, and D. Shiffler, “Pulse Power Driven High Power Traveling Wave Tube Amplifiers”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 561-564.
[n] S. Fu, X. Wang, and H. Liu, “Design on Accelerating Tube of High-Power Electron Linac for Irradiation Processing”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP035, pp. 652-654.
[n] V. Malinin, O. Karamyshev, T. V. Karamysheva, I. D. Lyapin, D. Popov, and A. A. Sinitsa, “The Design of the Center Region of MSC230 Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper THBO06, pp. 285-287. doi:10.18429/JACoW-CYCLOTRONS2022-THBO06
[n] O. N. Borisov et al., “New Beam Extraction System for the AIC-144 Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-22, pp. 528-531.
[n] F. A. DePaola, R. Faussete, S. K. Sharma, C. J. Spataro, A. K. Jain, and M. S. Jaski, “Mechanical Design Challenges Building a Prototype 8-Pole Corrector Magnet”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 50-52. doi:10.18429/JACoW-MEDSI2018-TUPH13
[n] A. Brachmann, “LCLS-II commissioning results”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 13-14. doi:10.18429/JACoW-IPAC2023-MOYD1
[n] A. Ferrari, A. Ijspeert, G. R. Stevenson, and E. Weisse, “Design of the LHC Beam Dump”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1300-1303.
[n] R. L. Gluckstern, R. F. Holsinger, K. Halbach, and G. N. Minerbo, “ULTRAFISH - Generalisation of SUPERFISH to m 1”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper C05, pp. 102-107.
[n] R. H. A. Farias et al., “Status of the 476 MHz 50 kW Solid State Amplifier for the LNLS Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB041, pp. 3972-3974.
[n] H. Joehri, C. Hess, L. Nue, L. Patthey, and T. Schmitt, “Development of the RIXS Manipulator”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 35-37. doi:10.18429/JACoW-MEDSI2016-MOPE16
[n] D. Spence and K. R. Lykke, “Production of Negative Hydrogen and Deuterium Ions in Microwave-Driven Ion Sources”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4048, pp. 508-510.
[n] G. N. Minerbo, R. A. Jameson, and O. R. Sander, “Four-Dimensional Beam Tomography”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2231-2234.
[n] M. A. Green et al., “Progress on the MICE Liquid Absorber Cooling and Cryogenic Distribution System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP018, pp. 1601-1603.
[n] W. Anders, A. Jankowiak, T. Kamps, J. Knobloch, O. Kugeler, and A. Neumann, “RF and SRF Layout of BERLinPro”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO008, pp. 53-55.
[n] J. Miao, “3D Coherent X-Ray Diffraction Microscopy: the Present and the Future”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper FROB002, pp. XX-XX.
[n] D. Massoletti, C. H. Kim, and A. Jackson, “Emittance Measurements in the ALS Booster Synchrotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAA05, pp. 204-206.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Psoroulas, C. Bula, P. Fernandez Carmona, G. Klimpki, D. Meer, and D. C. Weber, “Challenges in Fast Beam Current Control Inside the Cyclotron for Fast Beam Delivery in Proton Therapy”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 126-129.
- X. Altuna et al., “Acceleration of High Intensity Proton Beams”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA1, pp. 2617-2619.
- H. A. Koivisto, T. Ropponen, M. Savonen, and V. A. Toivanen, “Ion Beam Research and Development Work at JYFL”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOCO-B04, pp. 18-22.
- A. Gerbershagen, “Establishment of the New Particle Therapy Research Center (PARTREC) at UMCG Groningen”, presented at the 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper TUAO02, unpublished.
- S. De Santis, J. F. Beche, J. M. Byrd, M. Placidi, W. C. Turner, and M. S. Zolotorev, “Development of an Abort Gap Monitor for the Large Hadron Collider”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT143, pp. 2792-2794.
- P. Fernandez Carmona et al., “Continuous Beam Scanning Intensity Control of a Medical Proton Accelerator Using a Simulink Generated FPGA Gain Scheduled Controller”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 242-247.
- M. Henstridge, A. S. Fisher, M. C. Hoffmann, and Z. Huang, “A Wiggler-based THz Source at LCLS-II and Studies for a 150-m THz Transport Line for Pump-probe Experiments”, presented at the 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper WE2A3, unpublished.
- M. Placidi et al., “Status of the LEP II Spectrometer Project”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP7B06, pp. 436-438.
- J. A. Farrell, “The Design of Periodic Beam Transport Systems”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2804-2806.
- A. G. Afonin, V. I. Baranov, Y. A. Chesnokov, V. A. Maisheev, V. Terekhov, and I. A. Yazynin, “Use of Bent-Crystal Deflectors to Steer Beam in U-70 Accelerator of IHEP - Status and Prospects”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEACH01, pp. 95-97.
- D. R. Bett et al., “Latest Performance Results from the FONT5 Intra-train Beam Position and Angle Feedback System at ATF2”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPP068, pp. 2864-2866.
- A. Ferrari, G. R. Stevenson, and E. Weisse, “Design of the LHC Beam Dump”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1545-1548.
- R. Fliller III et al., “New Results from Crystal Collimation at RHIC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB034, pp. 1691-1693.
- F.-J. Decker, S. Colocho, A. Novokhatski, M. K. Sullivan, and U. Wienands, “Bunch Pattern with More Bunches in PEP-II”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT130, pp. 842-844.
- A. L. He et al., “Optimization of Rapid Magnetic Field Control of the CYCIAE-230 Cyclotron Beamline Magnets”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper MOPO019, pp. 106-109.
- A. Mosnier et al., “Present Status and Developments of the Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP075, pp. 3910-3912.
- Z. Li, S. De Silva, J. Delayen, R. Rimmer, Q. Wu, and B. Xiao, “EIC 197 MHz crab cavity HOM damping and tolerance analysis”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS137, this conference.
- D. Shu, J. W. J. Anton, S. P. Kearney, A. Li, C. Mao, and Y. Pan, “Precision Mechanical Design of a Miniature Dynamic Mirror Bender for the SSRF Beamline Upgrade Project”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 108-111.
- J. Bahrdt, “Tracking of Wavefronts”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper FROB003, pp. XX-XX.
- S. Imajo et al., “Development of Ultracold Neutron Accelerator for Time Focusing of Pulsed Neutrons”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 56-58.
- D. O. Tavares et al., “Commissioning and Optimization of the SIRIUS Fast Orbit Feedback”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO3AO03, pp. 123-130.
- X. Wang, H. Joehri, F. Loehl, M. Pedrozzi, and T. Stapf, “Structural Dynamic Modelling and Measurement of SwissFEL Bunch Compressor”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 128-132.
- M. Br?â and R. Wischnewski, “A Time Stamping TDC for SPEC and ZEN Platforms Based on White Rabbit”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1587-1589.
- T. C. Tseng et al., “Preliminary Active Vibration Elimination Study of the TPS Girder System”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 26-28.
- J. A. Nation, J. D. Ivers, G. S. Kerslick, L. Schachter, and D. Shiffler, “Pulse Power Driven High Power Traveling Wave Tube Amplifiers”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 561-564.
- S. Fu, X. Wang, and H. Liu, “Design on Accelerating Tube of High-Power Electron Linac for Irradiation Processing”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP035, pp. 652-654.
- V. Malinin, O. Karamyshev, T. V. Karamysheva, I. D. Lyapin, D. Popov, and A. A. Sinitsa, “The Design of the Center Region of MSC230 Cyclotron”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper THBO06, pp. 285-287.
- O. N. Borisov et al., “New Beam Extraction System for the AIC-144 Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper G-22, pp. 528-531.
- F. A. DePaola, R. Faussete, S. K. Sharma, C. J. Spataro, A. K. Jain, and M. S. Jaski, “Mechanical Design Challenges Building a Prototype 8-Pole Corrector Magnet”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 50-52.
- A. Brachmann, “LCLS-II commissioning results”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOYD1, pp. 13-14.
- A. Ferrari, A. Ijspeert, G. R. Stevenson, and E. Weisse, “Design of the LHC Beam Dump”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1300-1303.
- R. L. Gluckstern, R. F. Holsinger, K. Halbach, and G. N. Minerbo, “ULTRAFISH - Generalisation of SUPERFISH to m 1”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper C05, pp. 102-107.
- R. H. A. Farias et al., “Status of the 476 MHz 50 kW Solid State Amplifier for the LNLS Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB041, pp. 3972-3974.
- H. Joehri, C. Hess, L. Nue, L. Patthey, and T. Schmitt, “Development of the RIXS Manipulator”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 35-37.
- D. Spence and K. R. Lykke, “Production of Negative Hydrogen and Deuterium Ions in Microwave-Driven Ion Sources”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4048, pp. 508-510.
- G. N. Minerbo, R. A. Jameson, and O. R. Sander, “Four-Dimensional Beam Tomography”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2231-2234.
- M. A. Green et al., “Progress on the MICE Liquid Absorber Cooling and Cryogenic Distribution System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP018, pp. 1601-1603.
- W. Anders, A. Jankowiak, T. Kamps, J. Knobloch, O. Kugeler, and A. Neumann, “RF and SRF Layout of BERLinPro”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO008, pp. 53-55.
- J. Miao, “3D Coherent X-Ray Diffraction Microscopy: the Present and the Future”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper FROB002, pp. XX-XX.
- D. Massoletti, C. H. Kim, and A. Jackson, “Emittance Measurements in the ALS Booster Synchrotron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAA05, pp. 204-206.
Back to search