Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. A. Chermoshentsev, S. A. Gavrilov, and A. Feschenko, “Influence of Mechanical Vibrations on the Phase Resolution of Bunch Shape Monitor”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 477-479. doi:10.18429/JACoW-RUPAC2018-THPSC35
[n] V. N. Panteleev et al., “Project of the Radioisotope Facility RIC-80 (Radioactive Isotopes at Cyclotrone C-80) in PNPI”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper FRBCH06, pp. 236-238.
[n] J. Norem, F. Brandeberry, and A. Rauchas, “A Proposed Second Harmonic Acceleration System for the Intense Pulsed Neutron Source Rapid Cycling Synchrotron”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3490-3493.
[n] F. Epaud, J. M. Koch, and E. Plouviez, “Architecture and Control of the Fast Orbit Correction for the ESRF Storage Ring”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKS014, pp. 189-191.
[n] N. Utzel et al., “ITER Contribution to Control System Studio (CSS) Development Effort”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUMIB08, pp. 540-543.
[n] A. Xiao, T. B. Bolshakov, P. Lebrun, E. S. McCrory, V. Papadimitriou, and A. J. Slaughter, “Tevatron Beam Lifetimes at Injection Using the Shot Data Analysis System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT012, pp. 1279-1281.
[n] Y. Kim, K. Floettmann, T. Limberg, and D. Son, “S2E Simulations on Jitter for European XFEL Project”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF016, pp. 336-338.
[n] M. Pekeler et al., “Fabrication, Test and First Operation of Superconducting Accelerator Modules for Storage Rings”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB090, pp. 1410-1412.
[n] M. Solfaroli Camillocci, M. Juchno, M. Lamont, M. Schaumann, E. Todesco, and J. Wenninger, “Feed-Forward Corrections for Tune and Chromaticity Injection Decay During 2015 LHC Operation”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1489-1492. doi:10.18429/JACoW-IPAC2016-TUPMW026
[n] M. Peiniger, C. Piel, H. Vogel, and P. vom Stein, “A 100 MeV Injector Linac for the Swiss Light Source Supplied by Industry”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA56, pp. 3510-3512.
[n] E. Bouquerel, E. Baussan, M. Dracos, F. R. Osswald, P. Poussot, and N. Vassilopoulos, “ESSnuSB: A New Facility Concept for the Production of Very Intense Neutrino Beams in Europe”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1550-1552. doi:10.18429/JACoW-IPAC2014-TUPRI001
[n] H. E. Wegner and I. L. Feigenbaum, “High Current Beam Scanner”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1099-1106.
[n] M. Rojak, E. Shurina, Yu. Soloveichik, A. Grudiev, M. Tiunov, and P. Vobly, “MASTAC - New Code for Solving Three-Dimensional Non-linear Magnetostatic Problems”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPB09, pp. 2291-2293.
[n] J. M. Koch, F. Epaud, E. Plouviez, and K. B. Scheidt, “Fast Orbit Correction for the ESRF Storage Ring”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKS010, pp. 177-179.
[n] U. Klein, M. Peiniger, and H. Vogel, “RF Superconductivity at Interatom”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G08, pp. XX-XX.
[n] K. F. Minati, “A HIgh Speed Gas Handling System for the Brookhaven National Laboratory Three Stage Tandem Van de Graaff Facility”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 109-111.
For LaTeX
Use Complete Form
For BibTeX
References
- D. A. Chermoshentsev, S. A. Gavrilov, and A. Feschenko, “Influence of Mechanical Vibrations on the Phase Resolution of Bunch Shape Monitor”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 477-479.
- V. N. Panteleev et al., “Project of the Radioisotope Facility RIC-80 (Radioactive Isotopes at Cyclotrone C-80) in PNPI”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper FRBCH06, pp. 236-238.
- J. Norem, F. Brandeberry, and A. Rauchas, “A Proposed Second Harmonic Acceleration System for the Intense Pulsed Neutron Source Rapid Cycling Synchrotron”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3490-3493.
- F. Epaud, J. M. Koch, and E. Plouviez, “Architecture and Control of the Fast Orbit Correction for the ESRF Storage Ring”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKS014, pp. 189-191.
- N. Utzel et al., “ITER Contribution to Control System Studio (CSS) Development Effort”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUMIB08, pp. 540-543.
- A. Xiao, T. B. Bolshakov, P. Lebrun, E. S. McCrory, V. Papadimitriou, and A. J. Slaughter, “Tevatron Beam Lifetimes at Injection Using the Shot Data Analysis System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT012, pp. 1279-1281.
- Y. Kim, K. Floettmann, T. Limberg, and D. Son, “S2E Simulations on Jitter for European XFEL Project”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF016, pp. 336-338.
- M. Pekeler et al., “Fabrication, Test and First Operation of Superconducting Accelerator Modules for Storage Rings”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB090, pp. 1410-1412.
- M. Solfaroli Camillocci, M. Juchno, M. Lamont, M. Schaumann, E. Todesco, and J. Wenninger, “Feed-Forward Corrections for Tune and Chromaticity Injection Decay During 2015 LHC Operation”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1489-1492.
- M. Peiniger, C. Piel, H. Vogel, and P. vom Stein, “A 100 MeV Injector Linac for the Swiss Light Source Supplied by Industry”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA56, pp. 3510-3512.
- E. Bouquerel, E. Baussan, M. Dracos, F. R. Osswald, P. Poussot, and N. Vassilopoulos, “ESSnuSB: A New Facility Concept for the Production of Very Intense Neutrino Beams in Europe”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1550-1552.
- H. E. Wegner and I. L. Feigenbaum, “High Current Beam Scanner”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 1099-1106.
- M. Rojak, E. Shurina, Yu. Soloveichik, A. Grudiev, M. Tiunov, and P. Vobly, “MASTAC - New Code for Solving Three-Dimensional Non-linear Magnetostatic Problems”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPB09, pp. 2291-2293.
- J. M. Koch, F. Epaud, E. Plouviez, and K. B. Scheidt, “Fast Orbit Correction for the ESRF Storage Ring”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKS010, pp. 177-179.
- U. Klein, M. Peiniger, and H. Vogel, “RF Superconductivity at Interatom”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G08, pp. XX-XX.
- K. F. Minati, “A HIgh Speed Gas Handling System for the Brookhaven National Laboratory Three Stage Tandem Van de Graaff Facility”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 109-111.
Back to search