Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. C. Gupta et al., “HTS/lTS Hybrid High Field Superconducting Magnet Designs for the Proposed 100 TeV Proton Colliders”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3609-3611. doi:10.18429/JACoW-IPAC2015-WEPWI053
[n] J. B?ñhr et al., “Diagnostics for the Photon Injector Test Facility in Desy Zeuthen”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS21, pp. XX-XX.
[n] R. Rimmer and H. Schwarz, “RF System Design for the PEP-II B Factory”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1882-1885.
[n] M. Nordby and C. Perkins, “PEP-II Vacuum System Pressure Profile Modeling using EXCEL”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2515-2518.
[n] U. Wienands et al., “The Vacuum System for the PEP II High Energy Ring Straight Sections”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAA22, pp. 2129-2131.
[n] J. Nowak, V. Davidson, L. Genova, R. Johnson, and D. Reagan, “A Pulse to Pulse Klystron Diagnosis System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3097-3099.
[n] S. Khodyachykh et al., “New Beam Diagnostic Developments at the Photo-Injector Test Facility PITZ”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN023, pp. 3967-3969.
[n] S. De Santis, J. M. Byrd, Y. Yin, and Y. Y. Labs, “Fiberoptics-Based Instrumentation for Storage Ring Beam Diagnostics”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPC08, pp. 325-327.
[n] Y. Yin, “A DC Current Transformer for TRIUMF”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXD-09, pp. 498-500.
[n] F. R. Holdener et al., “Test Results of a Combined Distributed Ion Pump/Non-Evaporable Getter Pump Design Developed as a Proposed Alternative Pumping System for the PEP-II Asymmetric B- Factory Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP20, pp. 2075-2077.
[n] L. Staykov, “Design Optimization of an Emittance Measurement System at PITZ”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT032, pp. 220-222.
[n] B. Dwersteg, U. Klein, W.-D. Moeller, A. Palussek, D. Proch, and H. Vogel, “Experiment of the First Prototypes of Pipe Cooled 500 MHz Cavities from Explosion Bonded Niobium Copper”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1430-1433.
[n] T. J. P. Ellison, “Beam Diagnosis for Unmeasurably Cold Beams (Invited Paper)”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VII-02, pp. 274-281.
[n] P. Wanderer et al., “Test of Two 1.8 M SSC Model Magnets with Iterated Design”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 497-500.
[n] V. Derenchuk, D. L. Friesel, T. Sloan, and E. J. Stephenson, “Polarized Beam Performance of the IUCF CIPIOS, CIS, and Cooler Research Accelerator Facilities”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5B05, pp. 539-541.
[n] T. Friesen, A. Matheisen, and D. Proch, “Nb-Cu Sputter Activities at DESY”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G13, pp. XX-XX.
[n] S. De Santis, J. M. Byrd, R. B. Wilcox, Y. Yin, and Y. Y. Labs, “Optical Beam Timing Monitor Experiments at the Advanced Light Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS020, pp. 3952-3954.
[n] T. J. P. Ellison, R. J. Brown, and D. L. Friesel, “Status and Performance of the IUCF 270 KeV Electron Cooling System”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 633-636.
[n] G. Velev et al., “Field Quality of the LHC Inner Triplet Quadrupoles being Fabricated at Fermilab”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE015, pp. 1969-1971.
[n] T. J. P. Ellison, C. M. Fox, S. W. Koch, and R. Liu, “Nondestructive Diagnostics for Measuring the Phase, Position, and Intensity of 15 enA Beams from the IUCF Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I-03, pp. 279-283.
[n] J. B?ñhr et al., “Measurement of the longitudinal phase space at the Photo Injector Test Facility at DESY Zeuthen”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PT22, pp. XX-XX.
[n] J. Escallier et al., “Technology Development for React and Wind Common Coil Magnets”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOAB011, pp. 214-216.
[n] W. Manwaring, S. Noe, and T. Sloan, “Bargain Basement Bakeout”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 580-583.
[n] N. Kurita, D. Martin, S. Smith, C. Ng, M. Nordby, and C. Perkins, “Design of the Button Beam Position Monitor for PEP-II”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ25, pp. 2512-2514.
[n] R. Bakker, K. Holldack, P. Kuske, and R. M??ller, “Orbit Control at BESSY II: Present Performance and Plans”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3A10, pp. 666-668.
[n] G. M??ller, “Microwave Properties of High-Tc Oxide Superconductors”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89D01, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- R. C. Gupta et al., “HTS/lTS Hybrid High Field Superconducting Magnet Designs for the Proposed 100 TeV Proton Colliders”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3609-3611.
- J. B?ñhr et al., “Diagnostics for the Photon Injector Test Facility in Desy Zeuthen”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PS21, pp. XX-XX.
- R. Rimmer and H. Schwarz, “RF System Design for the PEP-II B Factory”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1882-1885.
- M. Nordby and C. Perkins, “PEP-II Vacuum System Pressure Profile Modeling using EXCEL”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2515-2518.
- U. Wienands et al., “The Vacuum System for the PEP II High Energy Ring Straight Sections”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAA22, pp. 2129-2131.
- J. Nowak, V. Davidson, L. Genova, R. Johnson, and D. Reagan, “A Pulse to Pulse Klystron Diagnosis System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3097-3099.
- S. Khodyachykh et al., “New Beam Diagnostic Developments at the Photo-Injector Test Facility PITZ”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN023, pp. 3967-3969.
- S. De Santis, J. M. Byrd, Y. Yin, and Y. Y. Labs, “Fiberoptics-Based Instrumentation for Storage Ring Beam Diagnostics”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPC08, pp. 325-327.
- Y. Yin, “A DC Current Transformer for TRIUMF”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper IXD-09, pp. 498-500.
- F. R. Holdener et al., “Test Results of a Combined Distributed Ion Pump/Non-Evaporable Getter Pump Design Developed as a Proposed Alternative Pumping System for the PEP-II Asymmetric B- Factory Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP20, pp. 2075-2077.
- L. Staykov, “Design Optimization of an Emittance Measurement System at PITZ”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT032, pp. 220-222.
- B. Dwersteg, U. Klein, W.-D. Moeller, A. Palussek, D. Proch, and H. Vogel, “Experiment of the First Prototypes of Pipe Cooled 500 MHz Cavities from Explosion Bonded Niobium Copper”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1430-1433.
- T. J. P. Ellison, “Beam Diagnosis for Unmeasurably Cold Beams (Invited Paper)”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper VII-02, pp. 274-281.
- P. Wanderer et al., “Test of Two 1.8 M SSC Model Magnets with Iterated Design”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 497-500.
- V. Derenchuk, D. L. Friesel, T. Sloan, and E. J. Stephenson, “Polarized Beam Performance of the IUCF CIPIOS, CIS, and Cooler Research Accelerator Facilities”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP5B05, pp. 539-541.
- T. Friesen, A. Matheisen, and D. Proch, “Nb-Cu Sputter Activities at DESY”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G13, pp. XX-XX.
- S. De Santis, J. M. Byrd, R. B. Wilcox, Y. Yin, and Y. Y. Labs, “Optical Beam Timing Monitor Experiments at the Advanced Light Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS020, pp. 3952-3954.
- T. J. P. Ellison, R. J. Brown, and D. L. Friesel, “Status and Performance of the IUCF 270 KeV Electron Cooling System”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 633-636.
- G. Velev et al., “Field Quality of the LHC Inner Triplet Quadrupoles being Fabricated at Fermilab”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAE015, pp. 1969-1971.
- T. J. P. Ellison, C. M. Fox, S. W. Koch, and R. Liu, “Nondestructive Diagnostics for Measuring the Phase, Position, and Intensity of 15 enA Beams from the IUCF Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I-03, pp. 279-283.
- J. B?ñhr et al., “Measurement of the longitudinal phase space at the Photo Injector Test Facility at DESY Zeuthen”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PT22, pp. XX-XX.
- J. Escallier et al., “Technology Development for React and Wind Common Coil Magnets”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOAB011, pp. 214-216.
- W. Manwaring, S. Noe, and T. Sloan, “Bargain Basement Bakeout”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 580-583.
- N. Kurita, D. Martin, S. Smith, C. Ng, M. Nordby, and C. Perkins, “Design of the Button Beam Position Monitor for PEP-II”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ25, pp. 2512-2514.
- R. Bakker, K. Holldack, P. Kuske, and R. M??ller, “Orbit Control at BESSY II: Present Performance and Plans”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3A10, pp. 666-668.
- G. M??ller, “Microwave Properties of High-Tc Oxide Superconductors”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89D01, pp. XX-XX.
Back to search