Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F.-T. Chung et al., “Upgrade of the Cryogenic Control System for SRF Modules at the Taiwan Light Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1356-1358. doi:10.18429/JACoW-IPAC2019-TUPMP047
[n] P. W. Wallace et al., “Extending OK5 Wiggler Operational Limit at Duke FEL/HIGS Facility”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1863-1865. doi:10.18429/JACoW-IPAC2015-TUPMA014
[n] A. Gerbershagen, A. Adelmann, R. D?â, D. Meer, V. Rizzoglio, and J. M. Schippers, “Simulations and Measurements of Proton Beam Energy Spectrum After Energy Degradation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4740-4743. doi:10.18429/JACoW-IPAC2017-THPVA124
[n] J. T. Seeman, “Limitation of Linear Colliders from Transverse RF Deflections”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1267-1269.
[n] S. Liu et al., “First results of the Hard X-Ray Self-Seeding Commissioning at the European XFEL”, in Proc. IPAC'20, Caen, France, May 2020, paper MOVIR09, pp. XX-XX.
[n] J. Arje et al., “Development of RIKEN 18 GHz ECRIS”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP016L, pp. 1478-1480.
[n] S. H. Liu, Y. He, and Z. J. Wang, “DESIGN STUDIES OF THE C-ADS MAIN LINAC WITH ONLY SPOKE CAVITIES”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA025, pp. 1781-1783.
[n] Y. C. Xu, H. Hao, D. H. He, and X. Q. Wang, “Study of MOSFET Solid-State Modulator for Fast Kicker”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP097, pp. 1775-1777.
[n] I. Hsu, C. I. Yu, and C. C. Chu, “Study of Fast Electron Beam Profile Monitor System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ26, pp. 2515-2517.
[n] A. Facco, F. Scarpa, V. Zviagintsev, Z. Lipeng, and R. Ti, “A 2.5 kW, Low Cost 352 MHz Solid State Rf Amplifier for CW and Pulsed Operation”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE121, pp. 2314-2316.
[n] M. S. Champion et al., “Plans for an Integrated Front-End Test Stand at the Spallation Neutron Source”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB044, pp. 954-956.
[n] D. M. Mills, B. W. Batterman, and D. H. Bilderback, “Thermal Design of Synchrotron Radiation Exit Ports at CESR”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3854-3857.
[n] X. Gu et al., “RHIC Electron Lenses Upgrades”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3830-3832. doi:10.18429/JACoW-IPAC2015-THPF059
For LaTeX
Use Complete Form
For BibTeX
References
- F.-T. Chung et al., “Upgrade of the Cryogenic Control System for SRF Modules at the Taiwan Light Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1356-1358.
- P. W. Wallace et al., “Extending OK5 Wiggler Operational Limit at Duke FEL/HIGS Facility”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1863-1865.
- A. Gerbershagen, A. Adelmann, R. D?â, D. Meer, V. Rizzoglio, and J. M. Schippers, “Simulations and Measurements of Proton Beam Energy Spectrum After Energy Degradation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4740-4743.
- J. T. Seeman, “Limitation of Linear Colliders from Transverse RF Deflections”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1267-1269.
- S. Liu et al., “First results of the Hard X-Ray Self-Seeding Commissioning at the European XFEL”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper MOVIR09, pp. XX-XX.
- J. Arje et al., “Development of RIKEN 18 GHz ECRIS”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP016L, pp. 1478-1480.
- S. H. Liu, Y. He, and Z. J. Wang, “DESIGN STUDIES OF THE C-ADS MAIN LINAC WITH ONLY SPOKE CAVITIES”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA025, pp. 1781-1783.
- Y. C. Xu, H. Hao, D. H. He, and X. Q. Wang, “Study of MOSFET Solid-State Modulator for Fast Kicker”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP097, pp. 1775-1777.
- I. Hsu, C. I. Yu, and C. C. Chu, “Study of Fast Electron Beam Profile Monitor System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ26, pp. 2515-2517.
- A. Facco, F. Scarpa, V. Zviagintsev, Z. Lipeng, and R. Ti, “A 2.5 kW, Low Cost 352 MHz Solid State Rf Amplifier for CW and Pulsed Operation”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE121, pp. 2314-2316.
- M. S. Champion et al., “Plans for an Integrated Front-End Test Stand at the Spallation Neutron Source”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB044, pp. 954-956.
- D. M. Mills, B. W. Batterman, and D. H. Bilderback, “Thermal Design of Synchrotron Radiation Exit Ports at CESR”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3854-3857.
- X. Gu et al., “RHIC Electron Lenses Upgrades”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3830-3832.
Back to search