Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. Bondar et al., “Beam Position Feedback System Supported by Karabo at European XFEL”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 280. doi:10.18429/JACoW-ICALEPCS2019-MOPHA040
[n] R. Ainsworth et al., “High Intensity Proton Stacking at Fermilab: 700 kW Running”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 136-140. doi:10.18429/JACoW-HB2018-TUA1WD04
[n] H. Higaki et al., “A Tank Circuit Monitoring a Large Number of Antiprotons in MUSASHI”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE001, pp. 948-950.
[n] F. T. Cole, “Recent Work on Collective Accelerators”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper G101, pp. 225-231.
[n] E. Bouquerel, M. Dracos, and F. R. Osswald, “Preliminary Design of a 4 MW Proton Beam Switchyard for a Neutrino Super Beam Production Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO004, pp. 1880-1882.
[n] J. K. Sekutowicz et al., “Feasibility of CW and LP Operation of the XFEL Linac”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUOCNO04, pp. 189-192.
[n] F. T. Cole and A. Galonsky, “Use of a 10 GeV High-Intensity Accelerator as a Pion Factory”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63G06, pp. XX-XX.
[n] E. Lecorche et al., “Development of the Future Spiral2 Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP076, pp. 257-259.
[n] B. Feinberg, G. Behrsing, B. Gavin, S. Ryce, K. Sihler, and D. Syversrud, “Ion Source and Injector Improvements at the SuperHILAC”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH438, pp. 692-694.
[n] Y. Divin et al., “A Hilbert Transform Spectrometer using a High Tc Josephson Junction for Bunch Length Measurements at the TTF Linac”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP39G, pp. 1509-1511.
[n] J. J. Jamroz et al., “ALBA High Voltage Splitter - Power Distribution to Ion Pumps”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMS024, pp. 1028-1031.
[n] L. Dallin, I. Blomqvist, D. Lowe, M. Silzer, and M. de Jong, “The Canadian Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOPA001, pp. 220-223.
[n] J. H. Kamperschroer, J. D. Sherman, T. J. Zaugg, A. H. Arvin, A. S. Bolt, and M. C. Richards, “Doppler-Shift Proton Fraction Measurement on a CW Proton Injector”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4051, pp. 511-513.
[n] S. Pissanetzky, M. Fan, G. R. Kalbfleish, and E. Whalen, “MAGNUS: A Computer Program for 3-D Magnet Design”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1678-1681.
[n] S. W. Mosko and N. F. Ziegler, “Improvements in the ORIC RF System”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 201-205.
[n] A. Faltens, E. Hartwig, D. Keefe, and W. Salsig, “Preliminary Hardware Concepts for a High-Energy Electron-Ring Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 484-488.
[n] P. Lebrun, L. Michelotti, and J.-F. Ostiguy, “Recent Studies of Dispersion Matched Steering for the ILC Bunch Compressor and Main Linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN104, pp. 2954-2956.
[n] M. J. Lee, “Steady-State Beam Loading of a Standing Wave Linac RF System”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper B-8, pp. 114-122.
[n] G. Torrisi et al., “Design of a Microwave Frequency Sweep Interferometer for Plasma Density Measurements in ECR Ion Sources”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2512-2514. doi:10.18429/JACoW-IPAC2015-WEPWA012
[n] A. Adraktas, M. J. Barnes, H. A. Day, and L. Ducimeti?¿re, “High Voltage Performance of Surface Coatings on Alumina Insulators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3603-3606. doi:10.18429/JACoW-IPAC2016-THPMW028
[n] D. Fernandez-Carreiras et al., “Alba, the PLC Based Protection Systems”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEC003, pp. 397-399.
[n] P. G. O et al., “The Bear Accelerator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1462-1465.
[n] P. Bauer, G. Ambrosio, L. Imbasciati, V. V. Kashikhin, M. Lamm, and A. V. Zlobin, “Quench Protection of High Field Nb3Sn Magnets for VLHC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH095, pp. 3454-3456.
[n] B. Sayyar-Rodsari et al., “Parametric Modeling of Transverse Phase Space of an RF Photoinjector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN101, pp. 3462-3464.
[n] J. Allinger, G. Danby, J. Jackson, and A. Prodell, “Ultra Stable High Field Superconducting Dipoles”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1323-1325.
[n] R. Berg, L. Dallin, and J. M. Vogt, “Orbit Control for the Canadian Light Source”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF009, pp. 2275-2277.
[n] N. Andreev et al., “Field Quality of Quadrupole R&D Models for the LHC IR”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP102, pp. 3194-3196.
[n] J. Rodnizki, D. Hirschmann, Z. Horvitz, B. Kaizer, A. Perry, and L. Weissman, “SARAF 4-Rods RFQ RF Power Line Splitting Design and Test”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 693-697. doi:10.18429/JACoW-LINAC2016-TH1A04
[n] M. Steinberg, P. Grand, H. J. C. Kouts, J. R. Powell, and H. Takahashi, “The Linear Accelerator Fuel Enricher Regenerator (LAFER) and Fission Product Transmutor (APEX”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3002-3003.
[n] G. Burtner, N. Dobeck, O. Garza, and R. LaMora, “Modular Magnet Current Regulator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1905-1908.
[n] C. Rimbault and P. Bambade, “Fast Luminosity Monitoring using Diamond Sensors for Super Flavour Factories”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME004, pp. 473-475.
[n] L. Zhao, B. Cluggish, and J. S. Kim, “Modeling ECRIS Plasma Using 2D GEM (General ECRIS Model)”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-21, pp. 116-119.
[n] L. V. Griffith and F. J. Deadrick, “Progress in ETA-II Magnetic Field Alignment Using Stretched Wire and Low Energy Electron Beam Techniques”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU443, pp. 423-425.
[n] J. S. Laster, T. Clifford, T. D, A. Marusic, and J. F. Skelly, “Post Mortem System - Playback of the RHIC Collider”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP063, pp. XX-XX.
[n] G. W. Bennett, “Insulated Target Instrumentation for the AGS Slow External Beam”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 637-640.
[n] U. Ratzinger et al., “A Pulsed Linac Front-end for ADS Applications”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB007, pp. 855-857.
[n] S. S. Park, Y. J. Han, S. H. Kim, S.-C. Kim, and S.-H. Nam, “Operational Analysis of PLS 2-GeV Electron Linac Klystron-modulator System”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF051, pp. 1720-1722.
[n] P. Bertrand et al., “SPIRAL Facility at GANIL: Ion Beam Simulation and Optimisation Method for the CIME Cyclotron Injection System”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-03, pp. 458-461.
[n] C. K. Sinclair et al., “The Cornell ERL Prototype Project”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAC005, pp. 192-194.
[n] B. Bellesia et al., “Optimisation of the Powering Tests of the LHC Superconducting Circuits”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP049, pp. 2908-2910.
[n] L. K. Grob et al., “Dust Analysis from LHC Vacuum System to Identify the Source of Macro-Particle-Beam-Interactions”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1082-1085. doi:10.18429/JACoW-IPAC2019-MOPTS094
[n] F. Turkot, W. E. Cooper, R. Hanft, and A. McInturff, “Maximum Field Capability of Energy Saver Superconducting Magnets”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3387-3390.
[n] M. J. Lee and J. Wu, “Optimal Control of Electron Beam Parameters and Machine Setting with a New Nonlinear Program”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP026, pp. 4823-4825.
[n] M. S. Hutton et al., “Visualization of Experimental Data at the National Ignition Facility”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC126, pp. 879-882.
[n] J. Szewinski et al., “Contribution to the ESS LLRF System by Polish Electronic Group”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4026-4027. doi:10.18429/JACoW-IPAC2017-THPAB129
[n] C. G. Limborg, S. Gierman, and J. G. Power, “A Modified QuadScan Technique for Emittance Measurement of Space Charge Dominated Beams”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG033, pp. 2667-2669.
[n] T. S. Lund, M. R. Clover, H. E. Gove, and K. H. Purser, “Transmission Measurements for Heavy Ion Beams through the Rochester MP Tandem”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1174-1176.
[n] J. Sebek, R. Hettel, R. Matheson, R. Ortiz, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1554-1557.
[n] P. Shrivastava, P. Mohania, J. Mulchandani, and Y. W. Wahnmode, “Performance of 6 MW Peak, 25kW Average Power Microwave System for 10 MeV, 10 kW Electron LINAC”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA015, pp. 649-651.
[n] M. Sachwitz, P. Castro, H.-J. Grabosch, U. Hahn, and H. Thom, “Wire Scanners in the Undulator Section of the VUV-FEL DESY”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT027, pp. XX-XX.
[n] R. Salemme, V. Baglin, G. Bregliozzi, and P. Chiggiato, “Vacuum Performance of Amorphous Carbon Coating at Cryogenic Temperature with Presence of Proton Beams”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3663-3666. doi:10.18429/JACoW-IPAC2016-THPMY007
[n] W. F. Bergan, A. C. Bartnik, I. V. Bazarov, H. He, D. L. Rubin, and J. P. Sethna, “Using Sloppy Models for Constrained Emittance Minimization at the Cornell Electron Storage Ring (CESR)”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2418-2420. doi:10.18429/JACoW-IPAC2017-TUPVA136
[n] A. Kreisel et al., “SARAF Phase-I Proton / Deuteron Linac Beam Operation Status”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper WEIOB02, pp. 770-774.
[n] D. J. Clark and C. M. Lyneis, “Operation of the LBL ECR Source Injection System”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I6-09, pp. 499-502.
[n] W. Chupp et al., “Operating Experience with a High Current Cs! Injector for Heavy Ion Fusion”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3389-3392.
[n] R. E. Worsham et al., “A 4-MeV Experimental Separated-Orbit Cyclotron”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 760-764.
[n] W. Zhang, A. V. Soukas, and S. Y. Zhang, “Transient Analysis of the AGS-Booster Ring Dipole and Qudrupole Magnet System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 940-943.
[n] M. Clinnick, J. Greer, J. Guggemos, R. Kilgore, and D. Rondeau, “Digital Controlled Frequency for Synchrotron Acceleration”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1261-1265.
[n] E. Blanco Vinuela, B. Bradu, R. Marti Martinez, R. Mazaeda, L. de Frutos, and C. de Prada, “PIDTUNE: A PID Autotuning Software Tool on UNICOS CPC”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 22-25. doi:10.18429/JACoW-ICALEPCS2015-MOC3O02
[n] W. C. Sellyey, J. D. Gilpatrick, and R. Senior, “Bench Test of a Residual Gas Ionization Profile Monitor (RGIPM)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH043, pp. 1318-1320.
[n] C. G. Trahern et al., “Design of the Commissioning Software for the AGS to RHIC Transfer Line”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR20, pp. 2279-2281.
[n] M. Y. Park, H. J. Kwon, Y. H. Kim, J. H. Jang, and Y. S. Cho, “DTL Fabrication Status of PEFP Linac”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP21008, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- V. Bondar et al., “Beam Position Feedback System Supported by Karabo at European XFEL”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 280.
- R. Ainsworth et al., “High Intensity Proton Stacking at Fermilab: 700 kW Running”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 136-140.
- H. Higaki et al., “A Tank Circuit Monitoring a Large Number of Antiprotons in MUSASHI”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE001, pp. 948-950.
- F. T. Cole, “Recent Work on Collective Accelerators”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper G101, pp. 225-231.
- E. Bouquerel, M. Dracos, and F. R. Osswald, “Preliminary Design of a 4 MW Proton Beam Switchyard for a Neutrino Super Beam Production Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO004, pp. 1880-1882.
- J. K. Sekutowicz et al., “Feasibility of CW and LP Operation of the XFEL Linac”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUOCNO04, pp. 189-192.
- F. T. Cole and A. Galonsky, “Use of a 10 GeV High-Intensity Accelerator as a Pion Factory”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63G06, pp. XX-XX.
- E. Lecorche et al., “Development of the Future Spiral2 Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP076, pp. 257-259.
- B. Feinberg, G. Behrsing, B. Gavin, S. Ryce, K. Sihler, and D. Syversrud, “Ion Source and Injector Improvements at the SuperHILAC”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH438, pp. 692-694.
- Y. Divin et al., “A Hilbert Transform Spectrometer using a High Tc Josephson Junction for Bunch Length Measurements at the TTF Linac”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP39G, pp. 1509-1511.
- J. J. Jamroz et al., “ALBA High Voltage Splitter - Power Distribution to Ion Pumps”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMS024, pp. 1028-1031.
- L. Dallin, I. Blomqvist, D. Lowe, M. Silzer, and M. de Jong, “The Canadian Light Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOPA001, pp. 220-223.
- J. H. Kamperschroer, J. D. Sherman, T. J. Zaugg, A. H. Arvin, A. S. Bolt, and M. C. Richards, “Doppler-Shift Proton Fraction Measurement on a CW Proton Injector”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4051, pp. 511-513.
- S. Pissanetzky, M. Fan, G. R. Kalbfleish, and E. Whalen, “MAGNUS: A Computer Program for 3-D Magnet Design”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1678-1681.
- S. W. Mosko and N. F. Ziegler, “Improvements in the ORIC RF System”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 201-205.
- A. Faltens, E. Hartwig, D. Keefe, and W. Salsig, “Preliminary Hardware Concepts for a High-Energy Electron-Ring Accelerator”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 484-488.
- P. Lebrun, L. Michelotti, and J.-F. Ostiguy, “Recent Studies of Dispersion Matched Steering for the ILC Bunch Compressor and Main Linac”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN104, pp. 2954-2956.
- M. J. Lee, “Steady-State Beam Loading of a Standing Wave Linac RF System”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper B-8, pp. 114-122.
- G. Torrisi et al., “Design of a Microwave Frequency Sweep Interferometer for Plasma Density Measurements in ECR Ion Sources”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2512-2514.
- A. Adraktas, M. J. Barnes, H. A. Day, and L. Ducimeti?¿re, “High Voltage Performance of Surface Coatings on Alumina Insulators”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3603-3606.
- D. Fernandez-Carreiras et al., “Alba, the PLC Based Protection Systems”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEC003, pp. 397-399.
- P. G. O et al., “The Bear Accelerator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1462-1465.
- P. Bauer, G. Ambrosio, L. Imbasciati, V. V. Kashikhin, M. Lamm, and A. V. Zlobin, “Quench Protection of High Field Nb3Sn Magnets for VLHC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH095, pp. 3454-3456.
- B. Sayyar-Rodsari et al., “Parametric Modeling of Transverse Phase Space of an RF Photoinjector”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN101, pp. 3462-3464.
- J. Allinger, G. Danby, J. Jackson, and A. Prodell, “Ultra Stable High Field Superconducting Dipoles”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1323-1325.
- R. Berg, L. Dallin, and J. M. Vogt, “Orbit Control for the Canadian Light Source”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF009, pp. 2275-2277.
- N. Andreev et al., “Field Quality of Quadrupole R&D Models for the LHC IR”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP102, pp. 3194-3196.
- J. Rodnizki, D. Hirschmann, Z. Horvitz, B. Kaizer, A. Perry, and L. Weissman, “SARAF 4-Rods RFQ RF Power Line Splitting Design and Test”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 693-697.
- M. Steinberg, P. Grand, H. J. C. Kouts, J. R. Powell, and H. Takahashi, “The Linear Accelerator Fuel Enricher Regenerator (LAFER) and Fission Product Transmutor (APEX”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3002-3003.
- G. Burtner, N. Dobeck, O. Garza, and R. LaMora, “Modular Magnet Current Regulator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1905-1908.
- C. Rimbault and P. Bambade, “Fast Luminosity Monitoring using Diamond Sensors for Super Flavour Factories”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME004, pp. 473-475.
- L. Zhao, B. Cluggish, and J. S. Kim, “Modeling ECRIS Plasma Using 2D GEM (General ECRIS Model)”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOPO-21, pp. 116-119.
- L. V. Griffith and F. J. Deadrick, “Progress in ETA-II Magnetic Field Alignment Using Stretched Wire and Low Energy Electron Beam Techniques”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU443, pp. 423-425.
- J. S. Laster, T. Clifford, T. D, A. Marusic, and J. F. Skelly, “Post Mortem System - Playback of the RHIC Collider”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP063, pp. XX-XX.
- G. W. Bennett, “Insulated Target Instrumentation for the AGS Slow External Beam”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 637-640.
- U. Ratzinger et al., “A Pulsed Linac Front-end for ADS Applications”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB007, pp. 855-857.
- S. S. Park, Y. J. Han, S. H. Kim, S.-C. Kim, and S.-H. Nam, “Operational Analysis of PLS 2-GeV Electron Linac Klystron-modulator System”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF051, pp. 1720-1722.
- P. Bertrand et al., “SPIRAL Facility at GANIL: Ion Beam Simulation and Optimisation Method for the CIME Cyclotron Injection System”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper G-03, pp. 458-461.
- C. K. Sinclair et al., “The Cornell ERL Prototype Project”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAC005, pp. 192-194.
- B. Bellesia et al., “Optimisation of the Powering Tests of the LHC Superconducting Circuits”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP049, pp. 2908-2910.
- L. K. Grob et al., “Dust Analysis from LHC Vacuum System to Identify the Source of Macro-Particle-Beam-Interactions”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1082-1085.
- F. Turkot, W. E. Cooper, R. Hanft, and A. McInturff, “Maximum Field Capability of Energy Saver Superconducting Magnets”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3387-3390.
- M. J. Lee and J. Wu, “Optimal Control of Electron Beam Parameters and Machine Setting with a New Nonlinear Program”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP026, pp. 4823-4825.
- M. S. Hutton et al., “Visualization of Experimental Data at the National Ignition Facility”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC126, pp. 879-882.
- J. Szewinski et al., “Contribution to the ESS LLRF System by Polish Electronic Group”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4026-4027.
- C. G. Limborg, S. Gierman, and J. G. Power, “A Modified QuadScan Technique for Emittance Measurement of Space Charge Dominated Beams”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPG033, pp. 2667-2669.
- T. S. Lund, M. R. Clover, H. E. Gove, and K. H. Purser, “Transmission Measurements for Heavy Ion Beams through the Rochester MP Tandem”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1174-1176.
- J. Sebek, R. Hettel, R. Matheson, R. Ortiz, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1554-1557.
- P. Shrivastava, P. Mohania, J. Mulchandani, and Y. W. Wahnmode, “Performance of 6 MW Peak, 25kW Average Power Microwave System for 10 MeV, 10 kW Electron LINAC”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA015, pp. 649-651.
- M. Sachwitz, P. Castro, H.-J. Grabosch, U. Hahn, and H. Thom, “Wire Scanners in the Undulator Section of the VUV-FEL DESY”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT027, pp. XX-XX.
- R. Salemme, V. Baglin, G. Bregliozzi, and P. Chiggiato, “Vacuum Performance of Amorphous Carbon Coating at Cryogenic Temperature with Presence of Proton Beams”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3663-3666.
- W. F. Bergan, A. C. Bartnik, I. V. Bazarov, H. He, D. L. Rubin, and J. P. Sethna, “Using Sloppy Models for Constrained Emittance Minimization at the Cornell Electron Storage Ring (CESR)”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2418-2420.
- A. Kreisel et al., “SARAF Phase-I Proton / Deuteron Linac Beam Operation Status”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper WEIOB02, pp. 770-774.
- D. J. Clark and C. M. Lyneis, “Operation of the LBL ECR Source Injection System”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I6-09, pp. 499-502.
- W. Chupp et al., “Operating Experience with a High Current Cs! Injector for Heavy Ion Fusion”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3389-3392.
- R. E. Worsham et al., “A 4-MeV Experimental Separated-Orbit Cyclotron”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 760-764.
- W. Zhang, A. V. Soukas, and S. Y. Zhang, “Transient Analysis of the AGS-Booster Ring Dipole and Qudrupole Magnet System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 940-943.
- M. Clinnick, J. Greer, J. Guggemos, R. Kilgore, and D. Rondeau, “Digital Controlled Frequency for Synchrotron Acceleration”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1261-1265.
- E. Blanco Vinuela, B. Bradu, R. Marti Martinez, R. Mazaeda, L. de Frutos, and C. de Prada, “PIDTUNE: A PID Autotuning Software Tool on UNICOS CPC”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 22-25.
- W. C. Sellyey, J. D. Gilpatrick, and R. Senior, “Bench Test of a Residual Gas Ionization Profile Monitor (RGIPM)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH043, pp. 1318-1320.
- C. G. Trahern et al., “Design of the Commissioning Software for the AGS to RHIC Transfer Line”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPR20, pp. 2279-2281.
- M. Y. Park, H. J. Kwon, Y. H. Kim, J. H. Jang, and Y. S. Cho, “DTL Fabrication Status of PEFP Linac”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP21008, pp. XX-XX.
Back to search