Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. W. Cheng et al., “Design of the Prototype Low Energy Beam Transport Line for the Spallation Neutron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA31, pp. 1958-1960.
[n] S. De Santis, R. Bartolini, and J. M. Byrd, “Transient Beam Loading in the DIAMOND Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH066, pp. 2937-2939.
[n] A. Nassiri, “A Correction Scheme for the Quadrupole Misalignment Errors in the ANL-APS Positron Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-54, pp. 760-762.
[n] D. T. Abell et al., “Thermal Modeling and Benchmarking of Crystalline Laser Amplifiers”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2921-2924. doi:10.18429/JACoW-IPAC2022-THPOTK062
[n] J. J. Chang, S. An, X. J. Liu, P. P. Wang, Y. J. Yuan, and W. Zhang, “New Control System for LAPECR2”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 394-396. doi:10.18429/JACoW-ICALEPCS2017-TUPHA012
[n] S. Brooks, “Extraction of Coulomb crystals with limited emittance growth”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 460-463. doi:10.18429/JACoW-IPAC2024-MOPR04
[n] J. Kewisch, I. Ben-Zvi, and X. Y. Chang, “Electron Beam Generation and Transport for the RHIC Electron Cooler”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE043, pp. 2774-2776.
[n] D. Medrano, L. M. Carter, and D. G. Maxwell, “CLS User Services Web Portal”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL008, pp. 139-141.
[n] A. Dick and P. Piot, “Modeling of the amplified optical stochastic cooling experiment at IOTA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2751-2754. doi:10.18429/JACoW-IPAC2023-WEPA043
[n] H. Lovelace III, C. Montag, F. Lin, and V. Ranjbar, “An update on EIC rapid cycling synchrotron optics”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 285-288. doi:10.18429/JACoW-IPAC2024-MOPG02
[n] R. C. Vondrasek, “Addressing Contamination in ECR Charge Breeders”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 90-93. doi:10.18429/JACoW-ECRIS2018-TUP07
[n] Q. Tura, C. Berthe, O. Danna, M. Faye, A. Savalle, and J. Suadeau, “Safety Control of the Spiral2 Radioactive Gas Storage System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1629-1633. doi:10.18429/JACoW-ICALEPCS2017-THPHA107
[n] K. Kumagai, N. Kumagai, K. Soutome, H. Tanaka, and C. Zhang, “Development and Installation of Skew Quadrupole Magnets for SPring-8 Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4A03, pp. 2104-2106.
[n] M. Maheshwari, D. J. Dunning, J. K. Jones, M. P. King, H. R. Kockelbergh, and A. E. Pollard, “Prediction and Clustering of Longitudinal Phase Space Images and Machine Parameters Using Neural Networks and K-Means Algorithm”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3417-3420. doi:10.18429/JACoW-IPAC2021-WEPAB318
[n] A. M. Batrakov, N. A. Vinokurov, and V. P. Bolotin, “STATUS OF THE NOVOSIBIRSK HIGH POWER FREE ELECTRON LASER”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUBM04, pp. XX-XX.
[n] M. Asaduzzaman, T. Junginger, R. E. Laxdal, R. M. L. McFadden, and E. Thoeng, “Muon Spin Rotation Studies of Bilayer Superconductors and Low Temperature Baked Niobium”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 62-66. doi:10.18429/JACoW-SRF2023-MOPMB005
[n] A. Antoine, C. Boucly, and T. Gharsa, “Integration of PLC and PXI Control Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1725-1728. doi:10.18429/JACoW-ICALEPCS2017-THPHA145
[n] E. Bozoki, “Calibration of the Ring Model for the NSLS Rings”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2219-2222.
[n] P. Odier, “A New Wide Band Wall Current Monitor”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PT20, pp. 216-218.
[n] E. Henestroza, S. S. Yu, and H. Li, “Design of Inductively Detuned RF Extraction Cavities for the Relativistic Klystron Two Beam Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC19, pp. 746-748.
For LaTeX
Use Complete Form
For BibTeX
References
- D. W. Cheng et al., “Design of the Prototype Low Energy Beam Transport Line for the Spallation Neutron Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA31, pp. 1958-1960.
- S. De Santis, R. Bartolini, and J. M. Byrd, “Transient Beam Loading in the DIAMOND Storage Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH066, pp. 2937-2939.
- A. Nassiri, “A Correction Scheme for the Quadrupole Misalignment Errors in the ANL-APS Positron Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-54, pp. 760-762.
- D. T. Abell et al., “Thermal Modeling and Benchmarking of Crystalline Laser Amplifiers”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2921-2924.
- J. J. Chang, S. An, X. J. Liu, P. P. Wang, Y. J. Yuan, and W. Zhang, “New Control System for LAPECR2”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 394-396.
- S. Brooks, “Extraction of Coulomb crystals with limited emittance growth”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR04, pp. 460-463.
- J. Kewisch, I. Ben-Zvi, and X. Y. Chang, “Electron Beam Generation and Transport for the RHIC Electron Cooler”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE043, pp. 2774-2776.
- D. Medrano, L. M. Carter, and D. G. Maxwell, “CLS User Services Web Portal”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL008, pp. 139-141.
- A. Dick and P. Piot, “Modeling of the amplified optical stochastic cooling experiment at IOTA”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA043, pp. 2751-2754.
- H. Lovelace III, C. Montag, F. Lin, and V. Ranjbar, “An update on EIC rapid cycling synchrotron optics”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG02, pp. 285-288.
- R. C. Vondrasek, “Addressing Contamination in ECR Charge Breeders”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 90-93.
- Q. Tura, C. Berthe, O. Danna, M. Faye, A. Savalle, and J. Suadeau, “Safety Control of the Spiral2 Radioactive Gas Storage System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1629-1633.
- K. Kumagai, N. Kumagai, K. Soutome, H. Tanaka, and C. Zhang, “Development and Installation of Skew Quadrupole Magnets for SPring-8 Storage Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4A03, pp. 2104-2106.
- M. Maheshwari, D. J. Dunning, J. K. Jones, M. P. King, H. R. Kockelbergh, and A. E. Pollard, “Prediction and Clustering of Longitudinal Phase Space Images and Machine Parameters Using Neural Networks and K-Means Algorithm”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3417-3420.
- A. M. Batrakov, N. A. Vinokurov, and V. P. Bolotin, “STATUS OF THE NOVOSIBIRSK HIGH POWER FREE ELECTRON LASER”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUBM04, pp. XX-XX.
- M. Asaduzzaman, T. Junginger, R. E. Laxdal, R. M. L. McFadden, and E. Thoeng, “Muon Spin Rotation Studies of Bilayer Superconductors and Low Temperature Baked Niobium”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB005, pp. 62-66.
- A. Antoine, C. Boucly, and T. Gharsa, “Integration of PLC and PXI Control Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1725-1728.
- E. Bozoki, “Calibration of the Ring Model for the NSLS Rings”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2219-2222.
- P. Odier, “A New Wide Band Wall Current Monitor”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PT20, pp. 216-218.
- E. Henestroza, S. S. Yu, and H. Li, “Design of Inductively Detuned RF Extraction Cavities for the Relativistic Klystron Two Beam Accelerator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPC19, pp. 746-748.
Back to search