[n] M. Z. Zhang, J. Hou, B. C. Jiang, H. H. Li, and S. Q. Tian, “Vertical Beam Size Correction at the SSRF Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC017, pp. 2043-2045.
[n] M. G. Ibison et al., “Optical System Design for The ESS Proton Beam and Target Diagnostics”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 347-349. doi:10.18429/JACoW-IPAC2016-MOPMR043
[n] M. P. J. Gaudreau, M. K. Kempkes, I. Roth, P. A. Dupire, and J. D. Holzmann, “Pulsed Power Systems for ESS Klystrons”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3368-3369. doi:10.18429/JACoW-IPAC2015-WEPTY042
[n] Y. Yue and Q. Qin, “Study of Background and MDI Design for CEPC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2028-2030. doi:10.18429/JACoW-IPAC2015-TUPTY016
[n] Z. H. Zhang, L. F. Zheng, W. H. Jia, and P. Liu, “Motion Control of the Mirror Chamber”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME034, pp. 2998-3000.
[n] F.-J. Boergermann and S. Marks, “Hot-/Cold-Side Characterization of Asymmetric Undulator Magnets”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC157, pp. 3257-3259.
[n] G. C. Pappas et al., “Development of Nonlinear Injection Kicker Magnet for ALS Accelerator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1837-1839. doi:10.18429/JACoW-IPAC2015-TUPJE084
[n] R. A. Bosch, K. J. Kleman, and R. A. Legg, “Simulated Performance of the Wisconsin Superconducting Electron Gun”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD075, pp. 1572-1574.
[n] R. M. Talman and J. Talman, “Beam and Spin Dynamics in an Electric Proton EDM Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THXB03, pp. 3203-3207.
[n] G. Xu, J. Chen, Z. Duan, and J. Qiu, “On-axis Beam Accumulation Enabled by Phase Adjustment of a Double-frequency RF System for Diffraction-limited Storage Rings”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2032-2035. doi:10.18429/JACoW-IPAC2016-WEOAA02
[n] M. Z. Zhang, B. C. Jiang, L. Ouyang, Q. L. Sun, and S. Q. Tian, “Study of a New Injection Scheme for the SSRF Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP054, pp. 685-687.
[n] K. Yasuoka, “Future Medical Accelerator”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEIC02, pp. 2152-2155.
[n] S. C. Lee, C. Bungau, and R. Cywinski, “Geant4 Simulations of Proton-induced Spallation for Applications in ADSR Systems”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1943-1945. doi:10.18429/JACoW-IPAC2016-TUPOY019
[n] H. D. Thomsen, A. I. S. Holm, and S. P. M?©ller, “A Linear Beam Raster System for the European Spallation Source?”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA005, pp. 70-72.
[n] M. Placidi et al., “Design Concepts for an RF Deflecting Cavity-Based Beam Spreader for a Next Generation FEL”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA069, pp. 2274-2276.
[n] A. Zografos et al., “Development of the Dielectric Wall Accelerator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THOAB201, pp. 3115-3117.
[n] G. C. Pappas et al., “Prototyping of the ALS-U Fast Kickers”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3637-3639. doi:10.18429/JACoW-IPAC2016-THPMW038
[n] G. G. Gulbekyan et al., “Development of FLNR JINR Heavy Ion Accelerator Complex in the Next Seven Years: New DC-280 Cyclotron Project”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS082, pp. 2700-2702.
[n] J. Makita, G. Ciovati, and P. Dhakal, “Temperature Mapping of Nitrogen-doped Niobium Superconducting Radiofrequency Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3575-3577. doi:10.18429/JACoW-IPAC2015-WEPWI038
[n] M. Kireeff Covo et al., “Upgrade and Commissioning of the 88-Inch Cyclotron Final Power Amplifier”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC064, pp. 229-231.
[n] M. W. Lin, D. R. Abercrombie, I. Jovanovic, and A. Rakhman, “Modeling and Experimental Update on Quasi-phase Matched Direct Laser Electron Acceleration In Density-modulated Plasma Waveguides”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA089, pp. 1325-1327.
[n] A. N. Pham, S.-Y. Lee, and T. H. Luo, “The Alpha Ferrite-loaded Coaxial Resonator Cavity”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC036, pp. 3365-3367.
[n] P. Piot et al., “Generation of Picosecond Electron-bunch Trains with Variable Spacing Using a Multi-pulse Photocathode Laser”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD077, pp. 2705-2707.
[n] H. H. Xu, J. H. Chen, G. T. Fan, D. Wang, H. L. Wu, and B. J. Xu, “Interaction Chamber Design for a Sub-MeV Laser-compton Gamma-ray Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1665-1668. doi:10.18429/JACoW-IPAC2015-TUPJE021
[n] C.-K. Min, S. H. Jung, H.-S. Kang, C. Kim, I. S. Ko, and S. J. Park, “RF Timing Distribution and Laser Synchronization Commissioning of PAL-XFEL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4234-4236. doi:10.18429/JACoW-IPAC2016-THPOY057
[n] M. J. McAteer, C. Carli, B. Mikulec, R. Tomas, and M. Aiba, “Preliminary Results of Linear Optics From Orbit Response in the CERN PSB”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO047, pp. 1973-1975.
[n] J. N. Galayda, “The Linac Coherent Light Source-II Project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 935-937. doi:10.18429/JACoW-IPAC2014-TUOCA01
[n] D. Sauerland, W. Hillert, A. Roth, M. Schedler, and D. Teytelman, “Amplitude, Phase and Temperature Stabilization of the ELSA RF System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI007, pp. 2717-2719.
[n] Y. H. Xu, Z. H. Sun, D. V. Campen, W. J. Corbett, C. L. Li, and W. J. Zhang, “Time Response of a Gridded X-ray Beam Ionization Chamber”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4220-4222. doi:10.18429/JACoW-IPAC2016-THPOY050
[n] S. Bhattacharyya, R. K. Yedavalli, and A. Mukherjee, “Fast Beam Tuning for Accelerator Driven Systems”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP081, pp. 2897-2899.
[n] D. G. Velazquez, R. L. Seibert, L. K. Spentzouris, J. Terry, and Z. M. Yusof, “Synthesis of Ultra-Thin Single Crystal MgO/Ag/MgO Multilayer for Controlled Photocathode Emissive Properties”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1846-1849. doi:10.18429/JACoW-IPAC2015-TUPMA004
[n] Q. Qin, “Performance and Prospects of BEPCII”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUYA03, pp. 1030-1034.
[n] D. Sauerland and W. Hillert, “Numerical and Experimental Substantiation of the Ion Density Beam Transfer Function Measurements”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 698-700. doi:10.18429/JACoW-IPAC2016-MOPOR047
[n] A. Perry, A. Barcikowski, G. L. Cherry, C. Dickerson, B. Mustapha, and P. N. Ostroumov, “EBIS Charge Breeder at ANL and its Integration into ATLAS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3969-3972. doi:10.18429/JACoW-IPAC2015-THPF108
[n] G. Y. Jiang and G. H. Chen, “Embedded EPICS Controller in Inserting Devices of SSRF”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA028, pp. 3204-3206.
[n] B. Li, J. Y. Li, W. Xu, and K. Xuan, “Beta Function Matching and Tune Compensation for HLS-II Insertion Devices”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1647-1649. doi:10.18429/JACoW-IPAC2015-TUPJE015
[n] J. G. Kulpin, K. J. Kleman, and R. A. Legg, “The Use of a Solid State Analog Television Transmitter as a Superconducting Electron Gun Power Amplifier”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC071, pp. 3452-3454.
[n] B. Kehrer et al., “Visible Light Diagnostics at the ANKA Storage Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 866-868. doi:10.18429/JACoW-IPAC2015-MOPHA037
[n] M. Schedler, F. Frommberger, W. Hillert, D. Proft, D. Sauerland, and D. Teytelman, “A New Digital LLRF System for a Fast Ramping Storage Ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2418-2420. doi:10.18429/JACoW-IPAC2014-WEPME062
[n] S. A. Rice and J. P. Verboncoeur, “Multipactor Breakdown Modelling Using an Averaged Version of Furman's SEY Model”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3419-3420. doi:10.18429/JACoW-IPAC2015-WEPTY062
[n] Y. Fuwa, Y. Iwashita, and M. Okamura, “Multi-strip Current Monitor for Pulsed Laser Plasma Diagnostics”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME029, pp. 538-540.
[n] V. L. Uvarov and V. I. Nikiforov, “Modification of the PENELOPE Transport System for HS Simulation of Isotope Production Mode”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS084, pp. 3630-3632.
[n] K. Ohmi and Y. Alexahin, “Effect of Beam-beam Interactions on Stability of Coherent Oscillations in a Muon Collider”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR004, pp. 2940-2942.
[n] H. D. Sanders and S. C. Glidden, “Compact, High Current, High Voltage Solid State Switches for Accelerator Applications”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD079, pp. 3701-3703.
[n] Y. D. Ding, P. F. Wang, Q. B. Wang, and Q. J. Zhang, “Study on the Energy Response of a Multi-layer Planar High Pressure Ionization Chamber using MCNP Program”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA008, pp. 3164-3166.
[n] R. H. Liu, L. Kang, H. Qu, G. Y. Wang, H. J. Wang, and J. S. Zhang, “Study of the Vibration of the AC Dipole and Magnetic Measurement Girder for CSNS/RCS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME023, pp. 2980-2982.
[n] D. C. Faircloth, S. R. Lawrie, T. Rutter, M. Whitehead, T. Wood, and V. G. Dudnikov, “Design of a Scaled High Duty Factor High Current Negative Penning Surface Plasma Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3956-3958. doi:10.18429/JACoW-IPAC2015-THPF104
Use Complete Form