Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Zangrando, S. Di Mitri, B. Diviacco, C. Knapic, and L. Tosi, “Commissioning of Two New Insertion Devices at ELETTRA”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG017, pp. 1050-1052.
[n] A. Chanc?® and J. Payet, “Loss Management in the Beta-beam Decay Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH009, pp. 1936-1938.
[n] G. Reinhold, R. Minkner, and K. Truempy, “Stabilized High-Voltage DC Power Supplies of the Sheilded Design”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 293-296.
[n] M. A. G. Johansson and R. Nietubyc, “MAX IV and Solaris Linac Magnets Production Series Measurement Results”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 79-81. doi:10.18429/JACoW-NAPAC2016-MOPOB06
[n] A. A. Bulavskaya, A. V. Batranin, Yu. M. Cherepennikov, A. A. Grigorieva, I. A. Miloichikova, and S. Stuchebrov, “Determination of Optimal Number of Beam Projections for Scanning Beam Profile Detector Development”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper WEPSC38, unpublished.
[n] J. M. Caicedo Carvajal, N. Neufeld, and R. Stoica, “Bringing the Power of Dynamic Languages to Hardware Control Systems”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEA001, pp. 358-360.
[n] P. Chu, C. H. Wang, and Q. Gan, “The Development Plan of High Level Applications for CSNS”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA07, pp. 99-101.
[n] T. Obina, W. X. Cheng, T. Honda, and M. Tobiyama, “Longitudinal Feedback System for the Photon Factory”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN036, pp. 233-235.
[n] W. Bruns, H. Henke, and S. Solyga, “Output Cavity Studies for a Low Voltage mm-Wave Sheet Beam Klystron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP08A, pp. 1918-1922.
[n] L. Liu, L. Kang, X. J. Nie, and H. Qu, “DESIGN OF CSNS R DUMP WINDOW”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI026, pp. 3354-3355.
[n] V. Palmieri, F. Stivanello, V. L. Ruzinov, and S. Yu. Stark, “Electropolishing of Seamless 1.5 GHz OFHC Copper Cavities”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F13, pp. 605-609.
[n] K. Oide and K. L. F. Bane, “Simulations of the Longitudinal Instability in the SLC Damping Rings”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3339-3342.
[n] A. Ferrari, A. Latina, L. Rinolfi, and F. Tecker, “Beam Dynamics Studies in the CLIC Injector Linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN058, pp. 2838-2840.
[n] N. Holtkamp, “The S-band Linear Collider Test Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUY05T, pp. 57-61.
[n] A. D. Wu et al., “Activities of Online Performance Recovery for CAFe Facility at IMP”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper TUPTEV002, pp..
[n] V. Ranjbar et al., “Polarization performance of a 3 GeV electron booster”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 289-291. doi:10.18429/JACoW-IPAC2024-MOPG03
[n] D. Horan and E. Cherbak, “An Analog RF Gap Voltage Regulation System for the Advanced Photon Source Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP152, pp. 1019-1021.
[n] I. Sakai et al., “Helium Beam Acceleration in the KEK Proton Synchrotron with a Newly Developed Injection System for Positive/Negative Ions”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAR05, pp. 1912-1914.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Zangrando, S. Di Mitri, B. Diviacco, C. Knapic, and L. Tosi, “Commissioning of Two New Insertion Devices at ELETTRA”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPG017, pp. 1050-1052.
- A. Chanc?® and J. Payet, “Loss Management in the Beta-beam Decay Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH009, pp. 1936-1938.
- G. Reinhold, R. Minkner, and K. Truempy, “Stabilized High-Voltage DC Power Supplies of the Sheilded Design”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 293-296.
- M. A. G. Johansson and R. Nietubyc, “MAX IV and Solaris Linac Magnets Production Series Measurement Results”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 79-81.
- A. A. Bulavskaya, A. V. Batranin, Yu. M. Cherepennikov, A. A. Grigorieva, I. A. Miloichikova, and S. Stuchebrov, “Determination of Optimal Number of Beam Projections for Scanning Beam Profile Detector Development”, presented at the 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, paper WEPSC38, unpublished.
- J. M. Caicedo Carvajal, N. Neufeld, and R. Stoica, “Bringing the Power of Dynamic Languages to Hardware Control Systems”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEA001, pp. 358-360.
- P. Chu, C. H. Wang, and Q. Gan, “The Development Plan of High Level Applications for CSNS”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPA07, pp. 99-101.
- T. Obina, W. X. Cheng, T. Honda, and M. Tobiyama, “Longitudinal Feedback System for the Photon Factory”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN036, pp. 233-235.
- W. Bruns, H. Henke, and S. Solyga, “Output Cavity Studies for a Low Voltage mm-Wave Sheet Beam Klystron”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP08A, pp. 1918-1922.
- L. Liu, L. Kang, X. J. Nie, and H. Qu, “DESIGN OF CSNS R DUMP WINDOW”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI026, pp. 3354-3355.
- V. Palmieri, F. Stivanello, V. L. Ruzinov, and S. Yu. Stark, “Electropolishing of Seamless 1.5 GHz OFHC Copper Cavities”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F13, pp. 605-609.
- K. Oide and K. L. F. Bane, “Simulations of the Longitudinal Instability in the SLC Damping Rings”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3339-3342.
- A. Ferrari, A. Latina, L. Rinolfi, and F. Tecker, “Beam Dynamics Studies in the CLIC Injector Linac”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN058, pp. 2838-2840.
- N. Holtkamp, “The S-band Linear Collider Test Facility”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUY05T, pp. 57-61.
- A. D. Wu et al., “Activities of Online Performance Recovery for CAFe Facility at IMP”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper TUPTEV002, pp..
- V. Ranjbar et al., “Polarization performance of a 3 GeV electron booster”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG03, pp. 289-291.
- D. Horan and E. Cherbak, “An Analog RF Gap Voltage Regulation System for the Advanced Photon Source Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP152, pp. 1019-1021.
- I. Sakai et al., “Helium Beam Acceleration in the KEK Proton Synchrotron with a Newly Developed Injection System for Positive/Negative Ions”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAR05, pp. 1912-1914.
Back to search