Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Gao et al., “ILC 1.3 GHz Superconducting RF Technology Development Program at IHEP”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP038, pp. 906-908.
[n] S. N. Galyamin and A. V. Tyukhtin, “Axicon-Based Concentrator for Cherenkov Radiation”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2036-2038. doi:10.18429/JACoW-IPAC2021-TUPAB250
[n] F. Gianotti, “Accelerator-Based Particle Physics”, in Proc. IPAC'20, Caen, France, May 2020, paper MOVIRO02, pp. XX-XX.
[n] S. A. Rastigeev et al., “RADIOCARBON MEASUREMENTS AND BACKGROUND INVESTIGATION AT SD RAS ACCELERATOR MASS SPECTROMETER”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper THBAU03, pp. XX-XX.
[n] A. Bonatto et al., “On the Development of a Low Peak-Power, High Repetition-Rate Laser Plasma Accelerator at IPEN”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1713-1716. doi:10.18429/JACoW-IPAC2021-TUPAB141
[n] V. I. Chernikov, I. B. Issinsky, O. S. Kozlov, V. A. Mikhailov, and S. A. Novikov, “Status of the Nuclotron Slow Extraction System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAR09, pp. 1918-1920.
[n] J.-Q. Lu, C.-E. Chen, D.-L. Xie, and S.-Q. Zhang, “The Beam Pulsing System for the 600 kV Neutron Generator”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1244-1247.
[n] W. Maier et al., “The Novel Optical Notch Filter for Stochastic Cooling at the ESR”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper WEPPO19, pp. 142-145.
[n] A. A. Sidorin et al., “Development of Positron Annihilation Spectroscopy at the LEPTA Facility”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 499-501. doi:10.18429/JACoW-RUPAC2016-WEPSB060
[n] M. K. Eseev et al., “Mechanism of Compression of Positron Clouds in the Surko Trap of the LEPTA Facility”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper TUCA04, pp. 20-22.
[n] C. H. Kim, “Comparison of Electric and Magnetic Quadrupole Focusing for the Low Energy End of an Induction-Linac-ICF Driver”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 951-954.
[n] R. Ito et al., “Construction of Thin-film Coating System Toward the Realization of Superconducting Multilayered Structure”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 445-447. doi:10.18429/JACoW-LINAC2018-TUPO050
[n] M. Dracos, E. Bouquerel, G. Fanourakis, G. Gokbulut, and A. Kayis Topaksu, “The European Spallation Source Neutrino Super Beam Design Study”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 582-585. doi:10.18429/JACoW-IPAC2019-MOPRB004
[n] J. A. Holmes, V. Danilov, J. D. Galambos, and K. Woody, “Longitudinal Impedance Simulations in ORBIT: Benchmarking and Application to the SNS Extracton Kicker”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH311, pp. 2057-2059.
[n] A. I. Warwick et al., “Development of Heavy Ion Induction Linear Accelerators as Drivers for Inertial Confinement Fusion”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1521-1523.
[n] V. Zubko, I. Bogdanov, S. Kozub, P. A. Shcherbakov, L. S. Shirshov, and L. Tkachenko, “Study of Electrodynamic and Thermodynamic Mechanisms Influencing Stability of Superconducting Rutherford Cable”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC007, pp. 337-339.
[n] F. Belloni, D. Doria, A. Lorusso, V. Nassisi, and L. Torrisi, “Development of an Ion Source via Laser Ablation Plasma”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH139, pp. 3119-3121.
[n] J. A. Clarke et al., “Construction of a Full Scale Superconducting Undulator Module for the International Linear Collider Positron Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP070, pp. 709-711.
[n] A. Moutardier et al., “Characterization of the Electron Beam Visualization Stations of the ThomX Accelerator”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 240-243. doi:10.18429/JACoW-IPAC2022-MOPOPT006
[n] Y. Shoji, S. H. Hisao, and T. Matsubara, “Quasi-isochronus Operation at NewSUBARU”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF037, pp. 2356-2358.
[n] A. Seville et al., “Progress on Dual Harmonic Acceleration on the ISIS Synchrotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH114, pp. 309-311.
[n] P. Bryant et al., “Improvement in Luminosity, Background and Chamber Protection with Beam Scrapers in the ISR”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 799-802.
[n] C.-E. Chen et al., “The Status of RF Superconducting Activities at Peking University”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1257-1260.
[n] W. F. Bergan, A. C. Bartnik, I. V. Bazarov, H. He, D. L. Rubin, and J. P. Sethna, “Minimization of Emittance at the Cornell Electron Storage Ring With Sloppy Models”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 402-404. doi:10.18429/JACoW-NAPAC2016-TUPOA58
[n] E. Henestroza, S. Heifets, and M. Zolotorev, “Trapped Modes in the PEP-II B-Factory Interaction Region”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPC08, pp. 2333-2335.
[n] E. Bouquerel et al., “The ESSnuSB Target Station”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3831-3834. doi:10.18429/JACoW-IPAC2019-THPRB013
[n] A. Kasliwal, R. Banwari, S. Kotaiah, T. G. Pandit, and A. Upadhyay, “Utilizing Multiplier Stack's Reflected Parasitic Capacitance to Achieve ZVS Operation of Resonant Inverter for 750 keV DC Accelerator”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA036, pp. 677-678.
[n] A. Klier and G. G. Hanson, “Geant Simulation of Six-Dimensional Cooling of a Muon Beams in a Ring Coolers”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP039, pp. 2580-2582.
[n] L. Michelotti et al., “Optics of a Proton Driver”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPE007, pp. 1557-1559.
[n] N. Akchurin et al., “Spin Dynamics Tests Preliminary to the Spin Splitter Experiment”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 959-961.
[n] E. Minehara, P. Bilquist, W. Evans, F. Lynch, and R. Pardo, “Design of the ATLAS PIIECR Ion Source”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper M-06, pp. 725-727.
[n] Y. Gao, T. G. Robertazzi, K. A. Brown, and J. Chen, “A Success-History Based Learning Procedure to Optimize Server Throughput in Large Distributed Control Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1182-1189. doi:10.18429/JACoW-ICALEPCS2017-THCPL03
[n] C. Pakuza et al., “A Beam Position Monitor for Electron Bunch Detection in the Presence of a More Intense Proton Bunch for the AWAKE Experiment”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 381-384. doi:10.18429/JACoW-IPAC2022-MOPOPT053
[n] G. V. Dolbilov et al., “Compact Infrared FEL for Scientific Applications”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP6B11, pp. 744-745.
[n] J. Gutleber et al., “High-Density Power Converter Real-Time Control for the MedAustron Synchrotron”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC028, pp. 127-130.
[n] L. S. Nadolski et al., “SOLEIL Machine Status and Upgrade”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1397-1400. doi:10.18429/JACoW-IPAC2022-TUPOMS005
[n] H. Smith, T. Constant, K. Crook, J. Fitch, and T. Taylor, “Radiation and Electrical Safety Systems for PEP”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2800-2803.
[n] R. Corsini, L. A. Dyks, W. Farabolini, A. Gilardi, P. Korysko, and K. N. Sjobak, “Status of VHEE Radiotherapy Related Studies at the CLEAR User Facility at CERN”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2704-2707. doi:10.18429/JACoW-IPAC2021-WEPAB044
[n] P. Korysko, P. Burrows, A. Faus-Golfe, K. Kubo, A. Latina, and T. Okugi, “Intensity Dependent Effects at ATF2, KEK”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 308-311. doi:10.18429/JACoW-IPAC2019-MOPGW086
[n] I. N. Meshkov et al., “Project of Electron Cooler for NICA”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper TUXAUD02, pp. 82-84.
[n] P. A. Norreys et al., “Proton Acceleration and High-Energy Density Physics from Laser Foil Interactions”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOPA007, pp. 573-575.
[n] E. I. Simakov et al., “Update on Fabrication and Tuning of the Photonic Band Gap Accelerating Structure for the Wakefield Experiment”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC25, pp. 120-122.
[n] A. Bonatto, R. Pakter, and F. B. Rizzato, “Nonlinear Propagation of Laser Pulses in Plasmas: a Comparison between Numerical and Analytical Solutions”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD033, pp. 4349-4351.
[n] P. Khare, P. K. Kush, and M. G. Karmarkar, “Approach Towards Establishing Cryogenic Test Facility for SCRF Cavities of 10 MeV Proton LINAC”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP17, pp. 320-321.
[n] J. Gao et al., “IHEP 1.3 GHz SC RF Technology R&D Progress”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO002, pp. 168-170.
[n] P. Anger et al., “Spiral2 Project: Integration of the Accelerator Processes, Construction of the Buildings and Process Connections”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper TUA2C01, pp. 153-155.
[n] A. D. Bross, S. Geer, H. G. Kirk, V. D. Shiltsev, and M. S. Zisman, “Muon Cooling R&D for the Muon Collider - A Five-year Plan for the US”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper TUM1MCIO01, pp. 46-50.
[n] G. Maire, A. Kehrli, S. Ravat, and H. Coppier, “The Detector Safety System of NA62 Experiment”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC056, pp. 222-225.
[n] Y. Gao, T. G. Robertazzi, K. A. Brown, J. Morris, and R. H. Olsen, “A New Simulation Architecture for Improving Software Reliability in Collider-Accelerator Control Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1261-1265. doi:10.18429/JACoW-ICALEPCS2017-THMPL03
[n] R. Corsini, “The Drive Beam Pulse Compression System for the CLIC RF Power Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA7, pp. 3396-3398.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Gao et al., “ILC 1.3 GHz Superconducting RF Technology Development Program at IHEP”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP038, pp. 906-908.
- S. N. Galyamin and A. V. Tyukhtin, “Axicon-Based Concentrator for Cherenkov Radiation”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2036-2038.
- F. Gianotti, “Accelerator-Based Particle Physics”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper MOVIRO02, pp. XX-XX.
- S. A. Rastigeev et al., “RADIOCARBON MEASUREMENTS AND BACKGROUND INVESTIGATION AT SD RAS ACCELERATOR MASS SPECTROMETER”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper THBAU03, pp. XX-XX.
- A. Bonatto et al., “On the Development of a Low Peak-Power, High Repetition-Rate Laser Plasma Accelerator at IPEN”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1713-1716.
- V. I. Chernikov, I. B. Issinsky, O. S. Kozlov, V. A. Mikhailov, and S. A. Novikov, “Status of the Nuclotron Slow Extraction System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAR09, pp. 1918-1920.
- J.-Q. Lu, C.-E. Chen, D.-L. Xie, and S.-Q. Zhang, “The Beam Pulsing System for the 600 kV Neutron Generator”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1244-1247.
- W. Maier et al., “The Novel Optical Notch Filter for Stochastic Cooling at the ESR”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper WEPPO19, pp. 142-145.
- A. A. Sidorin et al., “Development of Positron Annihilation Spectroscopy at the LEPTA Facility”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 499-501.
- M. K. Eseev et al., “Mechanism of Compression of Positron Clouds in the Surko Trap of the LEPTA Facility”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper TUCA04, pp. 20-22.
- C. H. Kim, “Comparison of Electric and Magnetic Quadrupole Focusing for the Low Energy End of an Induction-Linac-ICF Driver”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 951-954.
- R. Ito et al., “Construction of Thin-film Coating System Toward the Realization of Superconducting Multilayered Structure”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 445-447.
- M. Dracos, E. Bouquerel, G. Fanourakis, G. Gokbulut, and A. Kayis Topaksu, “The European Spallation Source Neutrino Super Beam Design Study”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 582-585.
- J. A. Holmes, V. Danilov, J. D. Galambos, and K. Woody, “Longitudinal Impedance Simulations in ORBIT: Benchmarking and Application to the SNS Extracton Kicker”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH311, pp. 2057-2059.
- A. I. Warwick et al., “Development of Heavy Ion Induction Linear Accelerators as Drivers for Inertial Confinement Fusion”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1521-1523.
- V. Zubko, I. Bogdanov, S. Kozub, P. A. Shcherbakov, L. S. Shirshov, and L. Tkachenko, “Study of Electrodynamic and Thermodynamic Mechanisms Influencing Stability of Superconducting Rutherford Cable”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THPSC007, pp. 337-339.
- F. Belloni, D. Doria, A. Lorusso, V. Nassisi, and L. Torrisi, “Development of an Ion Source via Laser Ablation Plasma”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH139, pp. 3119-3121.
- J. A. Clarke et al., “Construction of a Full Scale Superconducting Undulator Module for the International Linear Collider Positron Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP070, pp. 709-711.
- A. Moutardier et al., “Characterization of the Electron Beam Visualization Stations of the ThomX Accelerator”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 240-243.
- Y. Shoji, S. H. Hisao, and T. Matsubara, “Quasi-isochronus Operation at NewSUBARU”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF037, pp. 2356-2358.
- A. Seville et al., “Progress on Dual Harmonic Acceleration on the ISIS Synchrotron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH114, pp. 309-311.
- P. Bryant et al., “Improvement in Luminosity, Background and Chamber Protection with Beam Scrapers in the ISR”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 799-802.
- C.-E. Chen et al., “The Status of RF Superconducting Activities at Peking University”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1257-1260.
- W. F. Bergan, A. C. Bartnik, I. V. Bazarov, H. He, D. L. Rubin, and J. P. Sethna, “Minimization of Emittance at the Cornell Electron Storage Ring With Sloppy Models”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 402-404.
- E. Henestroza, S. Heifets, and M. Zolotorev, “Trapped Modes in the PEP-II B-Factory Interaction Region”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPC08, pp. 2333-2335.
- E. Bouquerel et al., “The ESSnuSB Target Station”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3831-3834.
- A. Kasliwal, R. Banwari, S. Kotaiah, T. G. Pandit, and A. Upadhyay, “Utilizing Multiplier Stack's Reflected Parasitic Capacitance to Achieve ZVS Operation of Resonant Inverter for 750 keV DC Accelerator”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA036, pp. 677-678.
- A. Klier and G. G. Hanson, “Geant Simulation of Six-Dimensional Cooling of a Muon Beams in a Ring Coolers”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP039, pp. 2580-2582.
- L. Michelotti et al., “Optics of a Proton Driver”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPE007, pp. 1557-1559.
- N. Akchurin et al., “Spin Dynamics Tests Preliminary to the Spin Splitter Experiment”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 959-961.
- E. Minehara, P. Bilquist, W. Evans, F. Lynch, and R. Pardo, “Design of the ATLAS PIIECR Ion Source”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper M-06, pp. 725-727.
- Y. Gao, T. G. Robertazzi, K. A. Brown, and J. Chen, “A Success-History Based Learning Procedure to Optimize Server Throughput in Large Distributed Control Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1182-1189.
- C. Pakuza et al., “A Beam Position Monitor for Electron Bunch Detection in the Presence of a More Intense Proton Bunch for the AWAKE Experiment”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 381-384.
- G. V. Dolbilov et al., “Compact Infrared FEL for Scientific Applications”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP6B11, pp. 744-745.
- J. Gutleber et al., “High-Density Power Converter Real-Time Control for the MedAustron Synchrotron”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC028, pp. 127-130.
- L. S. Nadolski et al., “SOLEIL Machine Status and Upgrade”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1397-1400.
- H. Smith, T. Constant, K. Crook, J. Fitch, and T. Taylor, “Radiation and Electrical Safety Systems for PEP”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2800-2803.
- R. Corsini, L. A. Dyks, W. Farabolini, A. Gilardi, P. Korysko, and K. N. Sjobak, “Status of VHEE Radiotherapy Related Studies at the CLEAR User Facility at CERN”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2704-2707.
- P. Korysko, P. Burrows, A. Faus-Golfe, K. Kubo, A. Latina, and T. Okugi, “Intensity Dependent Effects at ATF2, KEK”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 308-311.
- I. N. Meshkov et al., “Project of Electron Cooler for NICA”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper TUXAUD02, pp. 82-84.
- P. A. Norreys et al., “Proton Acceleration and High-Energy Density Physics from Laser Foil Interactions”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOPA007, pp. 573-575.
- E. I. Simakov et al., “Update on Fabrication and Tuning of the Photonic Band Gap Accelerating Structure for the Wakefield Experiment”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC25, pp. 120-122.
- A. Bonatto, R. Pakter, and F. B. Rizzato, “Nonlinear Propagation of Laser Pulses in Plasmas: a Comparison between Numerical and Analytical Solutions”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD033, pp. 4349-4351.
- P. Khare, P. K. Kush, and M. G. Karmarkar, “Approach Towards Establishing Cryogenic Test Facility for SCRF Cavities of 10 MeV Proton LINAC”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP17, pp. 320-321.
- J. Gao et al., “IHEP 1.3 GHz SC RF Technology R&D Progress”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO002, pp. 168-170.
- P. Anger et al., “Spiral2 Project: Integration of the Accelerator Processes, Construction of the Buildings and Process Connections”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper TUA2C01, pp. 153-155.
- A. D. Bross, S. Geer, H. G. Kirk, V. D. Shiltsev, and M. S. Zisman, “Muon Cooling R&D for the Muon Collider - A Five-year Plan for the US”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper TUM1MCIO01, pp. 46-50.
- G. Maire, A. Kehrli, S. Ravat, and H. Coppier, “The Detector Safety System of NA62 Experiment”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC056, pp. 222-225.
- Y. Gao, T. G. Robertazzi, K. A. Brown, J. Morris, and R. H. Olsen, “A New Simulation Architecture for Improving Software Reliability in Collider-Accelerator Control Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1261-1265.
- R. Corsini, “The Drive Beam Pulse Compression System for the CLIC RF Power Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA7, pp. 3396-3398.
Back to search