Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Drees, P. Cameron, R. Michnoff, C. Montag, and M. Wilinski, “RHIC Transverse Injection Damping”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG044, pp. 2691-2693.
[n] W. Bartmann, M. Benedikt, E. M?®tral, D. M?Âhl, and S. Peggs, “Gamma Transition Jump for PS2”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP089, pp. 3572-3574.
[n] J. Karn, B. Dunham, and M. Tiefenback, “Operational Monitoring of the CEBAF RF System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR15, pp. 2271-2272.
[n] T. Tanaka et al., “Test of a 1 m Long Disk-and-Washer Accelerating Tube”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper WEQ0005, pp. 229-231.
[n] R. J. Briggs, L. R. Reginato, and W. Waldron, “Helical Pulseline Structures for Ion Acceleration”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAB005, pp. 440-442.
[n] E. N. Shaposhnikova et al., “Flat Bunches in the LHC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1413-1415. doi:10.18429/JACoW-IPAC2014-TUPME028
[n] Z. K. Liang, W. Chen, X. Liu, J. Zha, K. F. Liu, and B. Qin, “Design of the Energy Selection System for Proton Therapy Based on GEANT4”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 30-32. doi:10.18429/JACoW-Cyclotrons2016-MOD01
[n] J. P. Rigla, S. Ferrer, Yu. A. Kubyshin, A. V. Poseryaev, and V. I. Shvedunov, “Compact Design of Race-track Microtron Magnets”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC159, pp. 2380-2382.
[n] P. Snopok and G. G. Hanson, “Six-Dimensional Cooling Lattice Studies for the Muon Collider”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE080, pp. 3533-3535.
[n] E. Khabibullina et al., “Development of the Ion Beams HIPR-1 Transport Channel for Ion Energy Losses Measurement in Plasma Target”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 276-278. doi:10.18429/JACoW-RUPAC2018-TUPSA61
[n] J. L. Belmont and J. L. Pabot, “Study of Axial Injection for the Grenoble Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper C-009, pp. XX-XX.
[n] C. Riedel and J. Struckmeier, “A Posteriori Error Estimation for Simulations of Charged Particle Beams”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP5A10, pp. 1405-1407.
[n] H. G. Khodzhibagiyan et al., “Prototype Superconducting Magnets for the NICA Accelerator Complex”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME028, pp. 3567-3569.
[n] C. M. Bhat and F. Zimmermann, “LHC Luminosity Upgrade with Large Piwinski Angle Scheme: A Recent Look”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ032, pp. 1879-1881.
[n] E. Wooldridge, C. D. Beard, P. A. McIntosh, B. D. Muratori, and S. L. Smith, “BBU Limitations for ERLs”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC059, pp. 199-201.
[n] I. Hsu, C. I. Yu, and C. C. Chu, “Study of Fast Electron Beam Profile Monitor System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ26, pp. 2515-2517.
[n] E. F. Wilson et al., “Experiences with Laser Survey Instrument Based Approach to National Ignition Facility Diagnostic Alignments”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 52-58. doi:10.18429/JACoW-ICALEPCS2017-MOCPL02
[n] M. R. Buckner, M. Cappiello, E. Pitcher, and H. O, “Medical Isotope Production with the Accelerator Production of Tritium APT Facility”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4099, pp. 636-638.
[n] M. Rojak, E. Shurina, Yu. Soloveichik, A. Grudiev, M. Tiunov, and P. Vobly, “MASTAC - New Code for Solving Three-Dimensional Non-linear Magnetostatic Problems”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPB09, pp. 2291-2293.
[n] S. D. Nelson, G. J. Caporaso, and B. R. Poole, “Electromagnetic Simulations of Linear Proton Accelerator Structures Using Dielectric Wall Accelerators”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS058, pp. 1784-1786.
[n] P. K. Saha et al., “Beam Commissioning Results of the RCS Injection and Extraction at J-PARC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP105, pp. 3611-3613.
[n] D. L. Friesel et al., “The Indiana University Midwest Proton Radiation Institute”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAA004, pp. 645-647.
[n] H. Chen, C.-W. Chen, T.-Y. Chung, and F.-Y. Lin, “Development of Hall probe system for accurate field mapping at NSRRC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3815-3818. doi:10.18429/JACoW-IPAC2023-WEPM106
[n] V. A. Verzilov and P. E. Dirksen, “OTR Measurements with Sub-MeV Electrons”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 501-503. doi:10.18429/JACoW-IBIC2016-TUPG65
[n] S. Okada, “Design Studies for the Positron Factory”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP78, pp. 249-251.
[n] S. Mallon, M. Mottier, T. Pettersson, T. Risselada, and E. Wildner, “The Information System for LHC Parameters and Layouts”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP24H, pp. 2339-2344.
[n] W. Hartung et al., “Production Cavities and Cryomodules for a Heavy Ion Re-accelerator at Michigan State University”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO011, pp. 201-204.
[n] I. Lobach and A. I. Benediktovitch, “Coherent X-Ray Radiation From Electron Beam Processed by Channeling and Emittance Exchange”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 845-847. doi:10.18429/JACoW-IPAC2017-MOPVA001
[n] R. V. Batch, T. D. Cassidy, and W. H. DeLuca, “Plunging Faraday Cup System and a Slit System for Use in the Zero Gradient Synchrotron Short Straight Sections”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1138-1143.
[n] S. D. Kleban, R. F. Koontz, and A. E. Vlicks, “IKE: An Interactive Klystron Evaluation Program for SLAC Linear Collider Klystron Performance”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1576-1579.
[n] F. Cilyo, J. McCarthy, and B. Wisner, “Magnet Current Bypass Shunt”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3757-3760.
[n] L. Somaschini et al., “Tuner System Simulation and Tests for the 201-MHz MICE Cavity”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3927-3929. doi:10.18429/JACoW-IPAC2014-THPRI070
[n] K. X. Gu, X. Chen, T. M. Huang, Q. Ma, and W. M. Pan, “Design and Simulation of High Power Input Coupler for C-ADS Linac 5-Cell Elliptical Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB087, pp. 1343-1345.
[n] W. Hartung et al., “Cryomodule Development at Michigan State University for the Rare Isotope Accelerator”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP37, pp. 547-547.
[n] O. K. Kester et al., “The MSU/NSCL Re-Accelerator ReA3”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper MOOCAU05, pp. 57-61.
[n] T. Hardek, W. Kells, and H. Lai, “Very Low Intensity Storage-Ring Profile Monitor”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2219-2222.
[n] J. M. Potter, “A Resonantly Coupled, Waveguide RF Power Manifold for Linear Accelerators”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper F10, pp. 362-362.
[n] N. Bazin et al., “Manufacturing Status of the IFMIF LIPAc SRF Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 939-941. doi:10.18429/JACoW-IPAC2017-MOPVA038
[n] M. Blank et al., “Experimental Demonstration of High Power Millimeter Wave Gyro-Amplifers”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP151, pp. 1016-1018.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Drees, P. Cameron, R. Michnoff, C. Montag, and M. Wilinski, “RHIC Transverse Injection Damping”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPG044, pp. 2691-2693.
- W. Bartmann, M. Benedikt, E. M?®tral, D. M?Âhl, and S. Peggs, “Gamma Transition Jump for PS2”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP089, pp. 3572-3574.
- J. Karn, B. Dunham, and M. Tiefenback, “Operational Monitoring of the CEBAF RF System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPR15, pp. 2271-2272.
- T. Tanaka et al., “Test of a 1 m Long Disk-and-Washer Accelerating Tube”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper WEQ0005, pp. 229-231.
- R. J. Briggs, L. R. Reginato, and W. Waldron, “Helical Pulseline Structures for Ion Acceleration”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROAB005, pp. 440-442.
- E. N. Shaposhnikova et al., “Flat Bunches in the LHC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1413-1415.
- Z. K. Liang, W. Chen, X. Liu, J. Zha, K. F. Liu, and B. Qin, “Design of the Energy Selection System for Proton Therapy Based on GEANT4”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 30-32.
- J. P. Rigla, S. Ferrer, Yu. A. Kubyshin, A. V. Poseryaev, and V. I. Shvedunov, “Compact Design of Race-track Microtron Magnets”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC159, pp. 2380-2382.
- P. Snopok and G. G. Hanson, “Six-Dimensional Cooling Lattice Studies for the Muon Collider”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE080, pp. 3533-3535.
- E. Khabibullina et al., “Development of the Ion Beams HIPR-1 Transport Channel for Ion Energy Losses Measurement in Plasma Target”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 276-278.
- J. L. Belmont and J. L. Pabot, “Study of Axial Injection for the Grenoble Cyclotron”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper C-009, pp. XX-XX.
- C. Riedel and J. Struckmeier, “A Posteriori Error Estimation for Simulations of Charged Particle Beams”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP5A10, pp. 1405-1407.
- H. G. Khodzhibagiyan et al., “Prototype Superconducting Magnets for the NICA Accelerator Complex”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME028, pp. 3567-3569.
- C. M. Bhat and F. Zimmermann, “LHC Luminosity Upgrade with Large Piwinski Angle Scheme: A Recent Look”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPZ032, pp. 1879-1881.
- E. Wooldridge, C. D. Beard, P. A. McIntosh, B. D. Muratori, and S. L. Smith, “BBU Limitations for ERLs”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC059, pp. 199-201.
- I. Hsu, C. I. Yu, and C. C. Chu, “Study of Fast Electron Beam Profile Monitor System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ26, pp. 2515-2517.
- E. F. Wilson et al., “Experiences with Laser Survey Instrument Based Approach to National Ignition Facility Diagnostic Alignments”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 52-58.
- M. R. Buckner, M. Cappiello, E. Pitcher, and H. O, “Medical Isotope Production with the Accelerator Production of Tritium APT Facility”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4099, pp. 636-638.
- M. Rojak, E. Shurina, Yu. Soloveichik, A. Grudiev, M. Tiunov, and P. Vobly, “MASTAC - New Code for Solving Three-Dimensional Non-linear Magnetostatic Problems”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPB09, pp. 2291-2293.
- S. D. Nelson, G. J. Caporaso, and B. R. Poole, “Electromagnetic Simulations of Linear Proton Accelerator Structures Using Dielectric Wall Accelerators”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS058, pp. 1784-1786.
- P. K. Saha et al., “Beam Commissioning Results of the RCS Injection and Extraction at J-PARC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP105, pp. 3611-3613.
- D. L. Friesel et al., “The Indiana University Midwest Proton Radiation Institute”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FOAA004, pp. 645-647.
- H. Chen, C.-W. Chen, T.-Y. Chung, and F.-Y. Lin, “Development of Hall probe system for accurate field mapping at NSRRC”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM106, pp. 3815-3818.
- V. A. Verzilov and P. E. Dirksen, “OTR Measurements with Sub-MeV Electrons”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 501-503.
- S. Okada, “Design Studies for the Positron Factory”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP78, pp. 249-251.
- S. Mallon, M. Mottier, T. Pettersson, T. Risselada, and E. Wildner, “The Information System for LHC Parameters and Layouts”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP24H, pp. 2339-2344.
- W. Hartung et al., “Production Cavities and Cryomodules for a Heavy Ion Re-accelerator at Michigan State University”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO011, pp. 201-204.
- I. Lobach and A. I. Benediktovitch, “Coherent X-Ray Radiation From Electron Beam Processed by Channeling and Emittance Exchange”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 845-847.
- R. V. Batch, T. D. Cassidy, and W. H. DeLuca, “Plunging Faraday Cup System and a Slit System for Use in the Zero Gradient Synchrotron Short Straight Sections”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 1138-1143.
- S. D. Kleban, R. F. Koontz, and A. E. Vlicks, “IKE: An Interactive Klystron Evaluation Program for SLAC Linear Collider Klystron Performance”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1576-1579.
- F. Cilyo, J. McCarthy, and B. Wisner, “Magnet Current Bypass Shunt”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3757-3760.
- L. Somaschini et al., “Tuner System Simulation and Tests for the 201-MHz MICE Cavity”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3927-3929.
- K. X. Gu, X. Chen, T. M. Huang, Q. Ma, and W. M. Pan, “Design and Simulation of High Power Input Coupler for C-ADS Linac 5-Cell Elliptical Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB087, pp. 1343-1345.
- W. Hartung et al., “Cryomodule Development at Michigan State University for the Rare Isotope Accelerator”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP37, pp. 547-547.
- O. K. Kester et al., “The MSU/NSCL Re-Accelerator ReA3”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper MOOCAU05, pp. 57-61.
- T. Hardek, W. Kells, and H. Lai, “Very Low Intensity Storage-Ring Profile Monitor”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2219-2222.
- J. M. Potter, “A Resonantly Coupled, Waveguide RF Power Manifold for Linear Accelerators”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper F10, pp. 362-362.
- N. Bazin et al., “Manufacturing Status of the IFMIF LIPAc SRF Linac”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 939-941.
- M. Blank et al., “Experimental Demonstration of High Power Millimeter Wave Gyro-Amplifers”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP151, pp. 1016-1018.
Back to search