Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. H. Nordby, “Ion Source Work at ANL”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART5-2, pp. 470-473.
[n] H. S. Sandberg et al., “Measuring the Beam Profile by Counting Ionization Electrons”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 257-260. doi:10.18429/JACoW-IBIC2019-TUBO04
[n] H. G. Blosser, “Beam Quality Measurements and Focusing Grid Studies”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59D06, pp. 203-207.
[n] F. Eozenou, M. Bruchon, and J. Gantier, “Parameters Investigation for Niobium Electro-Polishing”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP71, pp. XX-XX.
[n] S. Ninomiya, T. Adachi, S. Fukumoto, S. H. Hatori, and T. Kurita, “Dual-mode Beam Current Monitor”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH059, pp. 1145-1147.
[n] D. W. Stracener et al., “Radioactive Ion Beam Development at the Holifield Radioactive Ion Beam Facility”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper TPPE020, unpublished.
[n] M. A. Fraser et al., “Matching Studies Between the CERN PSB and PS Using Turn-by-Turn Beam Profile Acquisitions with a Residual Beam Gas Ionisation Monitor”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2161-2164. doi:10.18429/JACoW-IPAC2022-WEPOTK043
[n] Y. Jongen, P. Cohilis, H. A?»t Abderrahim, P. D, and L. Van Den Durpel, “A Proton-Driven, Intense, Subcritical, Fission Neutron Source”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper L-04, pp. 610-613.
[n] D. Domange, K. André, C. Hernalsteens, G. Roy, and D. Wollmann, “Tapering schemes for FCCee”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 370-373. doi:10.18429/JACoW-IPAC2025-MOPM031
[n] Y. Batygin, E. Guardincerri, D. Tupa, and S. Wender, “High-energy beamline for delivering H- laser stripped proton beam to LANSCE experimental area”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2216-2218. doi:10.18429/JACoW-IPAC2023-TUPM012
[n] S. Niang and L. S. Esposito, “Energy deposition in the new SPS's scrapers”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1734-1737. doi:10.18429/JACoW-IPAC2024-TUPS38
[n] S. Di Mitri et al., “Comparative Study of the FERMI@elettra Linac with One and Two-stage Electron Bunch Compression”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THPB03, pp. 604-607.
[n] M. Sawamura et al., “Press Forming Tests of Superconducting Spoke Cavity for Laser Compton Scattered Photon Sources”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1031-1033. doi:10.18429/JACoW-IPAC2017-MOPVA071
[n] T. Kurita, S. Fukumoto, S. H. Hatori, and S. Ninomiya, “An Improvement of Matching Circuit of RF Kicker Electrodes”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS114, pp. 1771-1773.
[n] H. Takeuchi et al., “Structural Analysis and Evaluation of Actual PC Bridge Using 950 keV/3.95 MeV X-Band Linacs”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4701-4703. doi:10.18429/JACoW-IPAC2017-THPVA102
[n] T. Inagaki et al., “Development of a Solid-State Pulse Generator Driving Kicker Magnets for a Novel Injection System of a Low Emittance Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1804-1807. doi:10.18429/JACoW-IPAC2018-WEYGBF4
[n] A. Fabich, H. Ait Abderrahim, U. Dorda, and D. Vandeplassche, “Accelerators for Applications in Energy and Nuclear Waste Transmutation”, in Proc. IPAC'20, Caen, France, May 2020, pp. 86. doi:10.18429/JACoW-IPAC2020-THVIR15
[n] D. Huttar and J. Riedel, “Flat Topping the PPA Synchrotron Magnet”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 503-507.
[n] A. H. Regan, S.-I. Kwon, T. S. Rohlev, Y.-M. Wang, M. S. Prokop, and D. W. Thomson, “The SNS Linac RF Control System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH015, pp. 803-805.
[n] Y. Luo et al., “Global Decoupling on the RHIC Ramp”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPA009, pp. 659-661.
[n] E. W. Hoffman, P. Marcato, D. H. Nordby, L. G. Parslow, and F. L. Schweingruber, “Zero Gradient Synchrotorn Experimental Area Computer Control System”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 871-873.
[n] A. D. Yeremian et al., “SLC Injector Simulation and Tuning for High Charge Transport”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-21, pp. 353-355.
[n] Y. Tokpanov, V. A. Lebedev, and W. Pellico, “Measurements of Magnetic Permeability of Soft Steel at High Frequencies”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD079, pp. 2711-2713.
[n] T. Kubo et al., “Multipactor Simulations in 650 MHz Superconducting Spoke Cavity for an Electron Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2161-2163. doi:10.18429/JACoW-IPAC2016-WEPMB018
[n] G. H. Biallas, N. T. Belcher, D. Douglas, T. Hiatt, and K. Jordan, “Combined Panofsky Quadrupole & Corrector Dipole”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS074, pp. 602-604.
[n] N. Marais, “MeerKAT Control and Monitoring System Architecture”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 247-250. doi:10.18429/JACoW-ICALEPCS2015-MOPGF067
[n] J.-F. Ostiguy, J.-P. Carneiro, V. A. Lebedev, A. Saini, and N. Solyak, “PXIE End-to-end Simulations”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA054, pp. 1829-1831.
[n] M. Sawamura et al., “Fabrication of Superconducting Spoke Cavity for Laser Compton Scattered Photon Sources”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2177-2179. doi:10.18429/JACoW-IPAC2016-WEPMB025
[n] O. Kiemschies, “Measurements of Strontium Ferrite Hybrid Permanent Magnet Quadrupoles after Removal for the Fermilab NOvA Upgrade in 2012”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3331-3334. doi:10.18429/JACoW-IPAC2015-WEPTY029
[n] A. Miura, H. Akikawa, M. Ikegami, and H. Sako, “Operational Performance of Wire Scanner Monitor in J-PARC Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE021, pp. 1008-1010.
[n] H. Tongu et al., “Study on Nondestructive Inspections for Super-conducting Cavity”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2174-2176. doi:10.18429/JACoW-IPAC2016-WEPMB024
[n] N. Nasr Esfahani, T. Kaltenbacher, J. W. Storey, and C. Vollinger, “Evaluation of Longitudinal Beam Impedance in the Beam Gas Ionization Monitor of the CERN-PS Accelerator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3163-3166. doi:10.18429/JACoW-IPAC2017-WEPIK095
[n] Y. Jongen, D. Vandeplassche, and P. Cohilis, “High Intensity Cyclotrons for Radioisotope Production, or The Comeback of the Positive Ions”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper C-04, pp. 115-119.
[n] S. Sato et al., “Beam Position Monitor and its Calibration in J-PARC LINAC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN045, pp. 4072-4074.
[n] P. P. Schneider et al., “Space-Charge Compensation in the Transition Area Between LEBT and RFQ”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4425-4428. doi:10.18429/JACoW-IPAC2017-THPVA006
[n] M. Fiorini et al., “Experimental Study of Crystal Channeling at CERN-SPS for Beam-halo Cleaning”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS022, pp. 1538-1540.
[n] S. MacLaren, A. Faltens, E. Henestroza, G. Ritchie, and P. Seidl, “Preliminary Results from a Scaled Final Focus Experiment for Heavy Ion Inertial Fusion”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA111, pp. 2852-2854.
[n] A. G. Afonin et al., “New Projects of Crystal Extraction at IHEP 70 GeV Accelerator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MODL3, pp. 53-55.
For LaTeX
Use Complete Form
For BibTeX
References
- D. H. Nordby, “Ion Source Work at ANL”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART5-2, pp. 470-473.
- H. S. Sandberg et al., “Measuring the Beam Profile by Counting Ionization Electrons”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 257-260.
- H. G. Blosser, “Beam Quality Measurements and Focusing Grid Studies”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59D06, pp. 203-207.
- F. Eozenou, M. Bruchon, and J. Gantier, “Parameters Investigation for Niobium Electro-Polishing”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP71, pp. XX-XX.
- S. Ninomiya, T. Adachi, S. Fukumoto, S. H. Hatori, and T. Kurita, “Dual-mode Beam Current Monitor”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH059, pp. 1145-1147.
- D. W. Stracener et al., “Radioactive Ion Beam Development at the Holifield Radioactive Ion Beam Facility”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE020, unpublished.
- M. A. Fraser et al., “Matching Studies Between the CERN PSB and PS Using Turn-by-Turn Beam Profile Acquisitions with a Residual Beam Gas Ionisation Monitor”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2161-2164.
- Y. Jongen, P. Cohilis, H. A?»t Abderrahim, P. D, and L. Van Den Durpel, “A Proton-Driven, Intense, Subcritical, Fission Neutron Source”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper L-04, pp. 610-613.
- D. Domange, K. André, C. Hernalsteens, G. Roy, and D. Wollmann, “Tapering schemes for FCCee”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, pp. 370-373.
- Y. Batygin, E. Guardincerri, D. Tupa, and S. Wender, “High-energy beamline for delivering H- laser stripped proton beam to LANSCE experimental area”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM012, pp. 2216-2218.
- S. Niang and L. S. Esposito, “Energy deposition in the new SPS's scrapers”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS38, pp. 1734-1737.
- S. Di Mitri et al., “Comparative Study of the FERMI@elettra Linac with One and Two-stage Electron Bunch Compression”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THPB03, pp. 604-607.
- M. Sawamura et al., “Press Forming Tests of Superconducting Spoke Cavity for Laser Compton Scattered Photon Sources”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1031-1033.
- T. Kurita, S. Fukumoto, S. H. Hatori, and S. Ninomiya, “An Improvement of Matching Circuit of RF Kicker Electrodes”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS114, pp. 1771-1773.
- H. Takeuchi et al., “Structural Analysis and Evaluation of Actual PC Bridge Using 950 keV/3.95 MeV X-Band Linacs”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4701-4703.
- T. Inagaki et al., “Development of a Solid-State Pulse Generator Driving Kicker Magnets for a Novel Injection System of a Low Emittance Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1804-1807.
- A. Fabich, H. Ait Abderrahim, U. Dorda, and D. Vandeplassche, “Accelerators for Applications in Energy and Nuclear Waste Transmutation”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, pp. 86.
- D. Huttar and J. Riedel, “Flat Topping the PPA Synchrotron Magnet”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 503-507.
- A. H. Regan, S.-I. Kwon, T. S. Rohlev, Y.-M. Wang, M. S. Prokop, and D. W. Thomson, “The SNS Linac RF Control System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH015, pp. 803-805.
- Y. Luo et al., “Global Decoupling on the RHIC Ramp”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOPA009, pp. 659-661.
- E. W. Hoffman, P. Marcato, D. H. Nordby, L. G. Parslow, and F. L. Schweingruber, “Zero Gradient Synchrotorn Experimental Area Computer Control System”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 871-873.
- A. D. Yeremian et al., “SLC Injector Simulation and Tuning for High Charge Transport”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-21, pp. 353-355.
- Y. Tokpanov, V. A. Lebedev, and W. Pellico, “Measurements of Magnetic Permeability of Soft Steel at High Frequencies”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD079, pp. 2711-2713.
- T. Kubo et al., “Multipactor Simulations in 650 MHz Superconducting Spoke Cavity for an Electron Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2161-2163.
- G. H. Biallas, N. T. Belcher, D. Douglas, T. Hiatt, and K. Jordan, “Combined Panofsky Quadrupole & Corrector Dipole”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS074, pp. 602-604.
- N. Marais, “MeerKAT Control and Monitoring System Architecture”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 247-250.
- J.-F. Ostiguy, J.-P. Carneiro, V. A. Lebedev, A. Saini, and N. Solyak, “PXIE End-to-end Simulations”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA054, pp. 1829-1831.
- M. Sawamura et al., “Fabrication of Superconducting Spoke Cavity for Laser Compton Scattered Photon Sources”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2177-2179.
- O. Kiemschies, “Measurements of Strontium Ferrite Hybrid Permanent Magnet Quadrupoles after Removal for the Fermilab NOvA Upgrade in 2012”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3331-3334.
- A. Miura, H. Akikawa, M. Ikegami, and H. Sako, “Operational Performance of Wire Scanner Monitor in J-PARC Linac”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE021, pp. 1008-1010.
- H. Tongu et al., “Study on Nondestructive Inspections for Super-conducting Cavity”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2174-2176.
- N. Nasr Esfahani, T. Kaltenbacher, J. W. Storey, and C. Vollinger, “Evaluation of Longitudinal Beam Impedance in the Beam Gas Ionization Monitor of the CERN-PS Accelerator”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3163-3166.
- Y. Jongen, D. Vandeplassche, and P. Cohilis, “High Intensity Cyclotrons for Radioisotope Production, or The Comeback of the Positive Ions”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper C-04, pp. 115-119.
- S. Sato et al., “Beam Position Monitor and its Calibration in J-PARC LINAC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN045, pp. 4072-4074.
- P. P. Schneider et al., “Space-Charge Compensation in the Transition Area Between LEBT and RFQ”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4425-4428.
- M. Fiorini et al., “Experimental Study of Crystal Channeling at CERN-SPS for Beam-halo Cleaning”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS022, pp. 1538-1540.
- S. MacLaren, A. Faltens, E. Henestroza, G. Ritchie, and P. Seidl, “Preliminary Results from a Scaled Final Focus Experiment for Heavy Ion Inertial Fusion”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA111, pp. 2852-2854.
- A. G. Afonin et al., “New Projects of Crystal Extraction at IHEP 70 GeV Accelerator”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MODL3, pp. 53-55.
Back to search