Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Seal et al., “Upgraded multiprobe sample inserts for thin film SRF cavity developments”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2775-2778. doi:10.18429/JACoW-IPAC2024-WEPS38
[n] A. Faltens, M. Firth, D. Keefe, and S. S. Rosenblum, “Long-Pulse Induction Acceleration of Heavy Ions”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3669-3672.
[n] H. Mainaud Durand et al., “Theoretical and Practical Feasibility Demonstration of a Micrometric Remotely Controlled Pre-alignment System for the CLIC Linear Collider”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO030, pp. 547-549.
[n] L. O. Dallin, “Cls 2.2: Ultra-Brilliant Round Beams Using Pseudo Longitudinal Gradient Bends”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1385-1387. doi:10.18429/JACoW-IPAC2019-TUPGW004
[n] T. J. Ellison, J. C. Collins, D. L. Friesel, W. P. Jones, P. Schwandt, and W. T. Sloan, “Progress in Commissioning the IUCF Cooler”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1608-1611.
[n] F.-T. Chung et al., “Upgrade of the Cryogenic Control System for SRF Modules at the Taiwan Light Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1356-1358. doi:10.18429/JACoW-IPAC2019-TUPMP047
[n] D. M. Harryman and C. C. Wilcox, “An Upgraded Scanning Wire Beam Profile Monitoring System for the ISIS High Energy Drift Space”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 396-400. doi:10.18429/JACoW-IBIC2017-WEPCC18
[n] S. Ishimoto, M. A. Green, Y. Kuno, W. Lau, S. Suzuki, and M. Y. Yoshida, “Liquid Hydrogen Absorber for MICE”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB065, pp. 421-423.
[n] J. C. Collins, T. Bertuccio, D. C. DuPlantis, Wm. Manwaring, and L. C. Welch, “A Review of Developments on the IUCF Cyclotron Control System”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper FC-01, pp. 559-563.
[n] J. Pasternak et al., “Accelerator and Particle Physics Research for the Next Generation Muon to Electron Conversion Experiment - the PRISM Task Force”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE056, pp. 3473-3475.
[n] Y. J. Yuan, Y. N. Rao, B. W. Wei, and J. W. Xia, “Simulation of RF Stacking and Multiple Single-Turn Injection and Multiturn Injection”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper H-11, pp. 479-482.
[n] N. Solyak and S. A. Glukhov, “Studies of Orthogonal Bumps for ILC Main Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC037, pp. 3059-3061.
[n] Y. H. Chin, “Modeling and Design of Klystron”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU2003, pp. 367-371.
[n] F. Loehl and P. Szypryt, “Active Beam Current Stabilization in the Cornell ERL Prototype Injector”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO018, pp. 523-525.
[n] S. Yamin, R. W. A?ƒmann, and B. Marchetti, “Study for the Alignment of Focusing Solenoid of ARES RF Gun and Effect of Misalignment of Solenoid on Emittance of Space Charge Dominated Electron Beam”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 147-150. doi:10.18429/JACoW-IPAC2019-MOPGW028
[n] J. A. Johnstone, M. Syphers, S. Peggs, and S. Tepikian, “Lattice Design of the VLHC Rings”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH134, pp. 3162-3164.
[n] C. Gonzalez-Ortiz, P. Ostroumov, and R. Ainsworth, “Simultaneous Compensation of Third-Order Resonances at the FNAL Recycler Ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3375-3378. doi:10.18429/JACoW-IPAC2023-WEPL112
[n] Z. B. du Toit et al., “Progress with the NAC Injector Cyclotron for Heavy and Polarized Ions”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VIII-15, pp. 361-364.
[n] H. Yoshikawa et al., “High Current 1ns Pulse Electron Gun”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-20, pp. 410-412.
[n] I. E. Campisi, J. Patrick Kelley, J. Schneider, and M. Sundelin, “CEBAF Cryomodule Testing”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2381-2384.
[n] R. Stassen, B. Breitkreutz, R. Greven, H. Schneider, and J. Wolters, “Kicker for the CR Stochastic Cooling System Based on HESR Slot-Ring Coupler”, in Proc. COOL2023, Montreux, Switzerland, Oct. 2023, pp. 106-108. doi:10.18429/JACoW-COOL2023-THPOSRP23
[n] M. Heya, H. Horiike, K. Ishii, and S. Suzuki, “Development of a Pump-Probe System using a Non-Coated ZnSe Beam Splitter Cube for an MIR-FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS18, pp. XX-XX.
[n] C. Lechner et al., “Seeding R&D at sFLASH”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 230-233. doi:10.18429/JACoW-FEL2019-TUP076
[n] J. Pfingstner, E. Adli, H. Holmestad, S. Bettoni, and S. Reiche, “Narrow-Band, Wide-Range Tuneable THz Source Based on the Slotted-Foil Technique”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 712-715. doi:10.18429/JACoW-IPAC2017-MOPIK078
[n] S. Gorgi Zadeh, R. Calaga, T. Flisgen, and U. van Rienen, “HOM Damping Options for the Z-Pole Operating Scenario of FCC-ee”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 590-593. doi:10.18429/JACoW-IPAC2019-MOPRB006
[n] V. Grattoni et al., “Simulation Studies for a EEHG seeded FEL in the XUV”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1705-1708. doi:10.18429/JACoW-IPAC2019-TUPRB013
[n] U. Beisel, O. Engels, A. Schempp, T. Sieber, and H. Vormann, “The Design of RFQ Accelerators with High Duty Factors”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP064G, pp. 774-776.
[n] D. Schulte, A. Grudiev, P. Lebrun, G. McMonagle, I. Syratchev, and W. Wuensch, “Status of the Exploration of an Alternative CLIC First Energy Stage Based on Klystrons”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME049, pp. 1676-1678.
[n] G. E. Lawler, J. I. Mann, J. B. Rosenzweig, R. J. Roussel, and V. S. Yu, “Initial Nanoblade-Enhanced Laser-Induced Cathode Emission Measurements”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2814-2817. doi:10.18429/JACoW-IPAC2021-WEPAB097
[n] M. Luong and I. Syratchev, “Simulations of the Damping of the Power Extraction and Transfer Structure PETS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A11, pp. 507-509.
[n] M. Ball, B. Hamilton, Wm. Manwaring, and T. Sloan, “Initial Performance of the IUCF Cooler Injector Synchrotron”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THCL1, pp. 498-502.
[n] B. Palmer, “Progress on $mu^+mu^-$ Colliders”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6B002, pp. 286-290.
[n] Y. H. Chin, H. Fukuma, J. Y. Huang, I. S. Ko, M. Kwon, and T. Y. Lee, “Study of the Fast Beam-Ion Instability in the Pohang Light Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THOA02B, pp. 276-278.
[n] W. Hillert, A. Balling, O. Boldt, A. Dieckmann, and F. Frommberger, “Crossing of Depolarizing Resonances in Circular Electron Accelerators”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC053, pp. 2133-2135.
[n] A. H. Botha et al., “Modification of the Extraction System of the Pretoria Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B33, pp. 137-140.
[n] P. Lebrun, “Collaborating with Industry: Lessons from the LHC Megaproject”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEIM02, pp. 1963-1963.
[n] S. A. Glukhov, “Symmetrical Parameterization for 6D Fully Coupled One-Turn Transport Matrix”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 390-392. doi:10.18429/JACoW-RUPAC2016-WEPSB014
[n] S. L. Birch, A. Nordt, and D. Paulic, “Personnel Safety Systems for the European Spallation Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1036-1038. doi:10.18429/JACoW-IPAC2015-MOPTY046
[n] U. Wienands, T. G. Berenc, T. Fors, F. Lenkszus, N. Sereno, and G. J. Waldschmidt, “A Scheme for Asynchronous Operation of the APS-U Booster Synchrotron”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1823-1825. doi:10.18429/JACoW-IPAC2018-WEPAF007
[n] M. Pezzetti, C. F. Fluder, and R. Orlandi, “CERN Neutrino Cryogenic Control System Technology: From the WA105 Test Facility to the NP04 and NP02 Platforms”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1210. doi:10.18429/JACoW-ICALEPCS2019-WEPHA049
[n] R. L. Gluckstern, F. Neri, and R. K. Cooper, “Cumulative Beam Breakup with a Distribution of Deflecting Mode Frequencies”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-40, pp. 540-542.
[n] X.T.Yang, J.H.Zhang, X.J.Zhang, H.M.Wu, J.Meng, S.J.Hou, “THE ULTRA-HIGH VACUUM PROTOTYPE OF HIRFL-CSR”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEDM03, pp. XX-XX.
[n] T. B. Bolshakov and E. S. McCrory, “Portable SDA (Sequenced Data Acquisition) with a Native XML Database”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH128, pp. 3101-3103.
[n] S. J. Payne, P. G. Barnes, G. M. Cross, A. Pertica, and S. A. Whitehead, “A Self Calibrating Real Time Multi-Channel Profile Monitor for the Isis Proton Synchrotron”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPC24, pp. 364-366.
[n] L. Elementi et al., “Mu2e AC Dipole 300 kHz and 5.1 MHz Tests and Comparison of Nickel-Zinc Ferrites”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD017, pp. 3533-3535.
[n] J. S. Kolski et al., “Diagnostic Pulse for Single-particle-like Beam Position Measurements During Accumulation/Production Mode in the Los Alamos Proton Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP097, pp. 3960-3962.
[n] M. W. Guetg, F.-J. Decker, Y. Ding, P. Emma, Z. Huang, and T. J. Maxwell, “Measurement of Advanced Dispersion-based Beam-tilt Correction”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 813-816. doi:10.18429/JACoW-IPAC2016-MOPOW045
[n] F. Sannibale et al., “Upgrade Options Towards Higher Fields and Beam Energies for Continuous-Wave Room-Temperature VHF RF Guns”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 542-544. doi:10.18429/JACoW-IPAC2017-MOPIK019
[n] G. Devanz, M. Jablonka, C. Magne, O. Napoly, M. Huening, and M. Wendt, “HOM Beam Coupling Measurements at the TESLA Test Facility (TTF)”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEAGB003, pp. 230-232.
[n] J. He et al., “Preliminary Result of Photon Counting Acquisition Scheme for Laser Pump/X-ray Probe Experiments”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1638-1640. doi:10.18429/JACoW-IPAC2015-TUPJE012
For LaTeX
Use Complete Form
For BibTeX
References
- D. Seal et al., “Upgraded multiprobe sample inserts for thin film SRF cavity developments”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS38, pp. 2775-2778.
- A. Faltens, M. Firth, D. Keefe, and S. S. Rosenblum, “Long-Pulse Induction Acceleration of Heavy Ions”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3669-3672.
- H. Mainaud Durand et al., “Theoretical and Practical Feasibility Demonstration of a Micrometric Remotely Controlled Pre-alignment System for the CLIC Linear Collider”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPO030, pp. 547-549.
- L. O. Dallin, “Cls 2.2: Ultra-Brilliant Round Beams Using Pseudo Longitudinal Gradient Bends”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1385-1387.
- T. J. Ellison, J. C. Collins, D. L. Friesel, W. P. Jones, P. Schwandt, and W. T. Sloan, “Progress in Commissioning the IUCF Cooler”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1608-1611.
- F.-T. Chung et al., “Upgrade of the Cryogenic Control System for SRF Modules at the Taiwan Light Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1356-1358.
- D. M. Harryman and C. C. Wilcox, “An Upgraded Scanning Wire Beam Profile Monitoring System for the ISIS High Energy Drift Space”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 396-400.
- S. Ishimoto, M. A. Green, Y. Kuno, W. Lau, S. Suzuki, and M. Y. Yoshida, “Liquid Hydrogen Absorber for MICE”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB065, pp. 421-423.
- J. C. Collins, T. Bertuccio, D. C. DuPlantis, Wm. Manwaring, and L. C. Welch, “A Review of Developments on the IUCF Cyclotron Control System”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper FC-01, pp. 559-563.
- J. Pasternak et al., “Accelerator and Particle Physics Research for the Next Generation Muon to Electron Conversion Experiment - the PRISM Task Force”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE056, pp. 3473-3475.
- Y. J. Yuan, Y. N. Rao, B. W. Wei, and J. W. Xia, “Simulation of RF Stacking and Multiple Single-Turn Injection and Multiturn Injection”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper H-11, pp. 479-482.
- N. Solyak and S. A. Glukhov, “Studies of Orthogonal Bumps for ILC Main Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC037, pp. 3059-3061.
- Y. H. Chin, “Modeling and Design of Klystron”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU2003, pp. 367-371.
- F. Loehl and P. Szypryt, “Active Beam Current Stabilization in the Cornell ERL Prototype Injector”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPO018, pp. 523-525.
- S. Yamin, R. W. A?ƒmann, and B. Marchetti, “Study for the Alignment of Focusing Solenoid of ARES RF Gun and Effect of Misalignment of Solenoid on Emittance of Space Charge Dominated Electron Beam”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 147-150.
- J. A. Johnstone, M. Syphers, S. Peggs, and S. Tepikian, “Lattice Design of the VLHC Rings”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH134, pp. 3162-3164.
- C. Gonzalez-Ortiz, P. Ostroumov, and R. Ainsworth, “Simultaneous Compensation of Third-Order Resonances at the FNAL Recycler Ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL112, pp. 3375-3378.
- Z. B. du Toit et al., “Progress with the NAC Injector Cyclotron for Heavy and Polarized Ions”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper VIII-15, pp. 361-364.
- H. Yoshikawa et al., “High Current 1ns Pulse Electron Gun”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-20, pp. 410-412.
- I. E. Campisi, J. Patrick Kelley, J. Schneider, and M. Sundelin, “CEBAF Cryomodule Testing”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2381-2384.
- R. Stassen, B. Breitkreutz, R. Greven, H. Schneider, and J. Wolters, “Kicker for the CR Stochastic Cooling System Based on HESR Slot-Ring Coupler”, in Proc. 14th International Workshop on Beam Cooling and Related Topics (COOL2023), Montreux, Switzerland, Oct. 2023, paper THPOSRP23, pp. 106-108.
- M. Heya, H. Horiike, K. Ishii, and S. Suzuki, “Development of a Pump-Probe System using a Non-Coated ZnSe Beam Splitter Cube for an MIR-FEL”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THPOS18, pp. XX-XX.
- C. Lechner et al., “Seeding R&D at sFLASH”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 230-233.
- J. Pfingstner, E. Adli, H. Holmestad, S. Bettoni, and S. Reiche, “Narrow-Band, Wide-Range Tuneable THz Source Based on the Slotted-Foil Technique”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 712-715.
- S. Gorgi Zadeh, R. Calaga, T. Flisgen, and U. van Rienen, “HOM Damping Options for the Z-Pole Operating Scenario of FCC-ee”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 590-593.
- V. Grattoni et al., “Simulation Studies for a EEHG seeded FEL in the XUV”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1705-1708.
- U. Beisel, O. Engels, A. Schempp, T. Sieber, and H. Vormann, “The Design of RFQ Accelerators with High Duty Factors”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP064G, pp. 774-776.
- D. Schulte, A. Grudiev, P. Lebrun, G. McMonagle, I. Syratchev, and W. Wuensch, “Status of the Exploration of an Alternative CLIC First Energy Stage Based on Klystrons”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME049, pp. 1676-1678.
- G. E. Lawler, J. I. Mann, J. B. Rosenzweig, R. J. Roussel, and V. S. Yu, “Initial Nanoblade-Enhanced Laser-Induced Cathode Emission Measurements”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2814-2817.
- M. Luong and I. Syratchev, “Simulations of the Damping of the Power Extraction and Transfer Structure PETS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2A11, pp. 507-509.
- M. Ball, B. Hamilton, Wm. Manwaring, and T. Sloan, “Initial Performance of the IUCF Cooler Injector Synchrotron”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THCL1, pp. 498-502.
- B. Palmer, “Progress on $mu^+mu^-$ Colliders”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6B002, pp. 286-290.
- Y. H. Chin, H. Fukuma, J. Y. Huang, I. S. Ko, M. Kwon, and T. Y. Lee, “Study of the Fast Beam-Ion Instability in the Pohang Light Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THOA02B, pp. 276-278.
- W. Hillert, A. Balling, O. Boldt, A. Dieckmann, and F. Frommberger, “Crossing of Depolarizing Resonances in Circular Electron Accelerators”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC053, pp. 2133-2135.
- A. H. Botha et al., “Modification of the Extraction System of the Pretoria Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B33, pp. 137-140.
- P. Lebrun, “Collaborating with Industry: Lessons from the LHC Megaproject”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEIM02, pp. 1963-1963.
- S. A. Glukhov, “Symmetrical Parameterization for 6D Fully Coupled One-Turn Transport Matrix”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 390-392.
- S. L. Birch, A. Nordt, and D. Paulic, “Personnel Safety Systems for the European Spallation Source”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1036-1038.
- U. Wienands, T. G. Berenc, T. Fors, F. Lenkszus, N. Sereno, and G. J. Waldschmidt, “A Scheme for Asynchronous Operation of the APS-U Booster Synchrotron”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1823-1825.
- M. Pezzetti, C. F. Fluder, and R. Orlandi, “CERN Neutrino Cryogenic Control System Technology: From the WA105 Test Facility to the NP04 and NP02 Platforms”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1210.
- R. L. Gluckstern, F. Neri, and R. K. Cooper, “Cumulative Beam Breakup with a Distribution of Deflecting Mode Frequencies”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-40, pp. 540-542.
- X.T.Yang, J.H.Zhang, X.J.Zhang, H.M.Wu, J.Meng, S.J.Hou, “THE ULTRA-HIGH VACUUM PROTOTYPE OF HIRFL-CSR”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEDM03, pp. XX-XX.
- T. B. Bolshakov and E. S. McCrory, “Portable SDA (Sequenced Data Acquisition) with a Native XML Database”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH128, pp. 3101-3103.
- S. J. Payne, P. G. Barnes, G. M. Cross, A. Pertica, and S. A. Whitehead, “A Self Calibrating Real Time Multi-Channel Profile Monitor for the Isis Proton Synchrotron”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPC24, pp. 364-366.
- L. Elementi et al., “Mu2e AC Dipole 300 kHz and 5.1 MHz Tests and Comparison of Nickel-Zinc Ferrites”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD017, pp. 3533-3535.
- J. S. Kolski et al., “Diagnostic Pulse for Single-particle-like Beam Position Measurements During Accumulation/Production Mode in the Los Alamos Proton Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP097, pp. 3960-3962.
- M. W. Guetg, F.-J. Decker, Y. Ding, P. Emma, Z. Huang, and T. J. Maxwell, “Measurement of Advanced Dispersion-based Beam-tilt Correction”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 813-816.
- F. Sannibale et al., “Upgrade Options Towards Higher Fields and Beam Energies for Continuous-Wave Room-Temperature VHF RF Guns”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 542-544.
- G. Devanz, M. Jablonka, C. Magne, O. Napoly, M. Huening, and M. Wendt, “HOM Beam Coupling Measurements at the TESLA Test Facility (TTF)”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEAGB003, pp. 230-232.
- J. He et al., “Preliminary Result of Photon Counting Acquisition Scheme for Laser Pump/X-ray Probe Experiments”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1638-1640.
Back to search