Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. H. Boulware, T. L. Grimm, R. Hipple, S. M. Lund, and V. S. Morozov, “Double-Bend Achromat Beamline for Injection Into a High-Power Superconducting Electron Linac”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 494-496. doi:10.18429/JACoW-NAPAC2019-TUPLH03
[n] Y. Yan et al., “Developing Criteria for Laser Transverse Instability in LWFA Simulations”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 855-857. doi:10.18429/JACoW-NAPAC2019-WEPLO05
[n] A. Hanuka, “Accurate and Confident Prediction of Electron Beam Longitudinal Properties Using Spectral Virtual Diagnostics”, presented at the IPAC'22, Bangkok, Thailand, Jun. 2022, paper TUIXGD1, unpublished.
[n] E. Cullerton, T. A. Butler, and V. Tupikov, “Proposed LLRF Improvements for Fermilab 201.25 MHz Linac”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP058, pp. 713-715.
[n] C. S. Narug et al., “Design Status of BCC Cryomodule for LCLS-II HE”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 263-266. doi:10.18429/JACoW-SRF2023-MOPMB065
[n] D. Mirarchi et al., “Operational handling of Crystal collimation at the LHC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 559-562. doi:10.18429/JACoW-IPAC2023-MOPL022
[n] G. Arnolds, H. Heinrichs, R. Mayer, N. Minatti, H. Piel, and W. Weingarten, “Design and Status of an Experimental Superconducting Linear Accelerator for Electrons”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3775-3778.
[n] H. J. Moe, J. H. Vacca, V. R. Veluri, and M. White, “Radiation Measurements at the Advanced Photon Source (APS) Linear Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA07, pp. 1064-1066.
[n] A. Khaleghi, M. Akbari, H. H. Haedar, and K. Mahmoudi, “Key Factors and Drivers for Utilizing Machine Learning in Experimental Data Analysis: A Case Study of Synchrotron Experimental Data”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper WEP044, unpublished.
[n] C. Reece and R. Sundelin, “Simulation of Multiturn Transverse Instabilities in Electron Storage Rings”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2350-2353.
[n] J. A. MacLachlan, “Correcting Closed-Orbit Distortion in the NAL Main Ring”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 892-895.
[n] M. Guijarro et al., “Beamline Experiments at ESRF with BLISS”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 70. doi:10.18429/JACoW-ICALEPCS2019-MOCPL03
[n] J. E. Griffin, C. Ankenbrandt, J. A. MacLachlan, and A. Moretti, “Isolated Bucket RF Systems in the Fermilab Antiproton Facility”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3502-3505.
[n] C. Wang, Q. Chu, T. Tan, D. Luo, and P. Xiong, “Study on the laser treatment of NB and Nb3Sn thin films on copper substrate with a kW nanosecond fiber laser”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4384-4385. doi:10.18429/JACoW-IPAC2023-THPA178
[n] E. R. Moog et al., “A Phase Shifter for Inline Undulators at the Advanced Photon Source Upgrade Project”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3830-3833. doi:10.18429/JACoW-IPAC2021-THPAB040
[n] G. Westenskow, G. Caporaso, Y. Chen, T. Houck, and S. Sampayan, “Double Pulse Experiment with a Velvet Cathode on the ATA Injector”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPC16, pp. 1027-1029.
[n] D. Luo et al., “Analysis of High Field Q-Slope (HFQS) Causes and Development of New Chemical Polishing Acid”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 699-702. doi:10.18429/JACoW-NAPAC2019-WEPLM47
[n] M. C. Rocha et al., “High Rigidity Girder System for the Sirius Machine”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 261-263. doi:10.18429/JACoW-MEDSI2018-WEPH26
[n] R. Lorenz, I. Reyzl, and S. Sabah, “Study of Orbit Feedback Systems for the TESLA Linear Collider”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P066, pp. 2392-2394.
[n] L. Rybarcyk and R. Garnett, “A Linac-to-Booster Injection Line for Transverse Matching and Correlated Injection Painting”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP07, pp. 303-305.
[n] C. C. Paulson et al., “Accelerator Systems Optimizing Code”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPR20, pp. 1164-1166.
[n] B. A. Shadwick and J. S. Wurtele, “Numerical Studies of Wake Excitation in Plasma Channels”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP21H, pp. 827-829.
[n] V. Morozov et al., “Development of FFA RLA design concept”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPC42, unpublished.
[n] R. C. Trendler, “Operation Experience with the Fermilab 150 GeV Injection Kicker”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3012-3015.
[n] A. Roth et al., “Energy Reduction of VarianÔÇÖs ProBeam 250 MeV Cyclotron to 226 MeV”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 344-347. doi:10.18429/JACoW-CYCLOTRONS2019-FRA03
[n] Ph. Guimbal et al., “Status of the ELSA-2 Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI066, pp. 1768-1770.
[n] M. J. Clarke, G. C. Murphy, R. N, and T. S. Richter, “Improving User Experience in Complex Systems”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 813. doi:10.18429/JACoW-ICALEPCS2019-TUCPR04
[n] F. Quetscher, H. De Gersem, and E. Gjonaj, “Shunt impedance calculations for an in-vacuum undulator at Petra IV”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1064-1067. doi:10.18429/JACoW-IPAC2023-MOPM034
[n] A. Z. Chen et al., “Test Results of PIP2IT MEBT Vacuum Protection System”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 278-281. doi:10.18429/JACoW-NAPAC2019-MOPLO19
[n] N. Diehl, F. Hinterberger, T. Mayer-Kuckuk, and D. Prasuhn, “Beam Emittance Growth by Internal Target Effects in COSY”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 714-717.
[n] Z. Mart?¡, J. Campmany, and M. Traveria, “A General Method for 2d Magnet Pole Design”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF032, pp. 1672-1674.
[n] F. Saint-Laurent et al., “Real Time Control of Long Duration Plasma Discharges in Tore Supra”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TH115, pp. XX-XX.
[n] Y.-C. Du, Q. Du, W.-H. Huang, Y. Lin, C.-X. Tang, and S. Zheng, “Preliminary Experiment of the Thomson Scattering X-ray Source at Tsinghua University”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS044, pp. 3386-3388.
[n] A. R. Donaldson, “Telemetry of Control and Monitoring Signals Across a High-Voltage Interface Using Light Links”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper F-9, pp. 591-600.
[n] W. Chou, A. I. Drozhdin, C. Johnstone, D. Ritson, and S. Ohnuma, “An Imaginary γt Lattice for the Fermilab Proton Driver”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH022, pp. 1711-1713.
[n] Q. Kerns et al., “Fermilab Tevatron High Level RF Accelerating Systems”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2809-2812.
[n] J. Grieser, J. Adamy, D. E. M. Lens, and H. Klingbeil, “A Method to Obtain the Frequency of the Longitudinal Dipole Oscillation for Modeling and Control in Synchrotrons with Single or Double Harmonic RF Systems”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP061, pp. 2846-2848.
[n] K. Bertsche and J. Palkovic, “Beam Profile Measurement in the Presence of Noise”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB19, pp. 2572-2573.
[n] R. B. Meinke, A. Faltens, and R. O. Bangerter, “Conceptual Design of Superconducting Quadrupole Arrays for the Heavy-Ion Fusion”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP110, pp. 3215-3217.
[n] A. L. Hillman, S. J. Pasky, N. Sereno, R. Soliday, and J. Wang, “Injector Power Supplies Reliability Improvements at the Advanced Photon Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE070, pp. 3804-3806.
[n] A. N. Payne, “System Modeling for the Longitudinal Beam Dynamics Control Problem in Heavy Ion Induction Accelerators”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 736-739.
[n] C. Xu, H. Deng, G. Geloni, T. Long, B. Yan, and J. Yan, “Bayesian optimization for generating attosecond X-ray FEL pulses”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 146-149. doi:10.18429/JACoW-IPAC2025-MOPB038
[n] J. Tueckmantel, “Review of Experience with Superconducting Cavities”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 279-284.
[n] C.-C. Kuo et al., “Vertical Beam Size Control in TLS and TPS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS067, pp. 3442-3444.
[n] L. Hagge, M. Huening, and J. Kreutzkamp, “Engineering Collaboration Experience at the European XFEL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2604-2606. doi:10.18429/JACoW-IPAC2017-WEPAB018
For LaTeX
Use Complete Form
For BibTeX
References
- C. H. Boulware, T. L. Grimm, R. Hipple, S. M. Lund, and V. S. Morozov, “Double-Bend Achromat Beamline for Injection Into a High-Power Superconducting Electron Linac”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 494-496.
- Y. Yan et al., “Developing Criteria for Laser Transverse Instability in LWFA Simulations”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 855-857.
- A. Hanuka, “Accurate and Confident Prediction of Electron Beam Longitudinal Properties Using Spectral Virtual Diagnostics”, presented at the 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, paper TUIXGD1, unpublished.
- E. Cullerton, T. A. Butler, and V. Tupikov, “Proposed LLRF Improvements for Fermilab 201.25 MHz Linac”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP058, pp. 713-715.
- C. S. Narug et al., “Design Status of BCC Cryomodule for LCLS-II HE”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB065, pp. 263-266.
- D. Mirarchi et al., “Operational handling of Crystal collimation at the LHC”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL022, pp. 559-562.
- G. Arnolds, H. Heinrichs, R. Mayer, N. Minatti, H. Piel, and W. Weingarten, “Design and Status of an Experimental Superconducting Linear Accelerator for Electrons”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3775-3778.
- H. J. Moe, J. H. Vacca, V. R. Veluri, and M. White, “Radiation Measurements at the Advanced Photon Source (APS) Linear Accelerator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPA07, pp. 1064-1066.
- A. Khaleghi, M. Akbari, H. H. Haedar, and K. Mahmoudi, “Key Factors and Drivers for Utilizing Machine Learning in Experimental Data Analysis: A Case Study of Synchrotron Experimental Data”, presented at the 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper WEP044, unpublished.
- C. Reece and R. Sundelin, “Simulation of Multiturn Transverse Instabilities in Electron Storage Rings”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2350-2353.
- J. A. MacLachlan, “Correcting Closed-Orbit Distortion in the NAL Main Ring”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 892-895.
- M. Guijarro et al., “Beamline Experiments at ESRF with BLISS”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 70.
- J. E. Griffin, C. Ankenbrandt, J. A. MacLachlan, and A. Moretti, “Isolated Bucket RF Systems in the Fermilab Antiproton Facility”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3502-3505.
- C. Wang, Q. Chu, T. Tan, D. Luo, and P. Xiong, “Study on the laser treatment of NB and Nb3Sn thin films on copper substrate with a kW nanosecond fiber laser”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA178, pp. 4384-4385.
- E. R. Moog et al., “A Phase Shifter for Inline Undulators at the Advanced Photon Source Upgrade Project”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3830-3833.
- G. Westenskow, G. Caporaso, Y. Chen, T. Houck, and S. Sampayan, “Double Pulse Experiment with a Velvet Cathode on the ATA Injector”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPC16, pp. 1027-1029.
- D. Luo et al., “Analysis of High Field Q-Slope (HFQS) Causes and Development of New Chemical Polishing Acid”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 699-702.
- M. C. Rocha et al., “High Rigidity Girder System for the Sirius Machine”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 261-263.
- R. Lorenz, I. Reyzl, and S. Sabah, “Study of Orbit Feedback Systems for the TESLA Linear Collider”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P066, pp. 2392-2394.
- L. Rybarcyk and R. Garnett, “A Linac-to-Booster Injection Line for Transverse Matching and Correlated Injection Painting”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP07, pp. 303-305.
- C. C. Paulson et al., “Accelerator Systems Optimizing Code”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPR20, pp. 1164-1166.
- B. A. Shadwick and J. S. Wurtele, “Numerical Studies of Wake Excitation in Plasma Channels”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP21H, pp. 827-829.
- V. Morozov et al., “Development of FFA RLA design concept”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPC42, unpublished.
- R. C. Trendler, “Operation Experience with the Fermilab 150 GeV Injection Kicker”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3012-3015.
- A. Roth et al., “Energy Reduction of VarianÔÇÖs ProBeam 250 MeV Cyclotron to 226 MeV”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 344-347.
- Ph. Guimbal et al., “Status of the ELSA-2 Project”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI066, pp. 1768-1770.
- M. J. Clarke, G. C. Murphy, R. N, and T. S. Richter, “Improving User Experience in Complex Systems”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 813.
- F. Quetscher, H. De Gersem, and E. Gjonaj, “Shunt impedance calculations for an in-vacuum undulator at Petra IV”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM034, pp. 1064-1067.
- A. Z. Chen et al., “Test Results of PIP2IT MEBT Vacuum Protection System”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 278-281.
- N. Diehl, F. Hinterberger, T. Mayer-Kuckuk, and D. Prasuhn, “Beam Emittance Growth by Internal Target Effects in COSY”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 714-717.
- Z. Mart?¡, J. Campmany, and M. Traveria, “A General Method for 2d Magnet Pole Design”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF032, pp. 1672-1674.
- F. Saint-Laurent et al., “Real Time Control of Long Duration Plasma Discharges in Tore Supra”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TH115, pp. XX-XX.
- Y.-C. Du, Q. Du, W.-H. Huang, Y. Lin, C.-X. Tang, and S. Zheng, “Preliminary Experiment of the Thomson Scattering X-ray Source at Tsinghua University”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS044, pp. 3386-3388.
- A. R. Donaldson, “Telemetry of Control and Monitoring Signals Across a High-Voltage Interface Using Light Links”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper F-9, pp. 591-600.
- W. Chou, A. I. Drozhdin, C. Johnstone, D. Ritson, and S. Ohnuma, “An Imaginary γt Lattice for the Fermilab Proton Driver”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH022, pp. 1711-1713.
- Q. Kerns et al., “Fermilab Tevatron High Level RF Accelerating Systems”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2809-2812.
- J. Grieser, J. Adamy, D. E. M. Lens, and H. Klingbeil, “A Method to Obtain the Frequency of the Longitudinal Dipole Oscillation for Modeling and Control in Synchrotrons with Single or Double Harmonic RF Systems”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPP061, pp. 2846-2848.
- K. Bertsche and J. Palkovic, “Beam Profile Measurement in the Presence of Noise”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPB19, pp. 2572-2573.
- R. B. Meinke, A. Faltens, and R. O. Bangerter, “Conceptual Design of Superconducting Quadrupole Arrays for the Heavy-Ion Fusion”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP110, pp. 3215-3217.
- A. L. Hillman, S. J. Pasky, N. Sereno, R. Soliday, and J. Wang, “Injector Power Supplies Reliability Improvements at the Advanced Photon Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE070, pp. 3804-3806.
- A. N. Payne, “System Modeling for the Longitudinal Beam Dynamics Control Problem in Heavy Ion Induction Accelerators”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 736-739.
- C. Xu, H. Deng, G. Geloni, T. Long, B. Yan, and J. Yan, “Bayesian optimization for generating attosecond X-ray FEL pulses”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB038, pp. 146-149.
- J. Tueckmantel, “Review of Experience with Superconducting Cavities”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 279-284.
- C.-C. Kuo et al., “Vertical Beam Size Control in TLS and TPS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS067, pp. 3442-3444.
- L. Hagge, M. Huening, and J. Kreutzkamp, “Engineering Collaboration Experience at the European XFEL”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2604-2606.
Back to search