Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Sekutowicz, P. Kneisel, and G. Wu, “Development of Superstructures for High Current Application”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper MOP40, pp. 140-143.
[n] A. Almomani and U. Ratzinger, “Status and First Measurement Results for a High Gradient CH-Cavity”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3724-3726. doi:10.18429/JACoW-IPAC2015-THPF019
[n] J. Ruan, H. T. Edwards, and R. P. Fliller, “Flat Long Pulse Train Formation Using Multi-pass Structure”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC083, pp. 250-252.
[n] I. Petrushina et al., “Measurements of the Electrical Axes of the CeC PoP RF Cavities”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3031-3034. doi:10.18429/JACoW-IPAC2019-WEPRB094
[n] M. Comunian, F. Grespan, and A. Pisent, “ESS DTL Error Study”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP086, pp. 1047-1049.
[n] M. Holding, C. M. Hammons, B. R. Lang, G. R. Murdoch, K. G. Potter, and R. T. Roseberry, “Engineering the SNS RTBT/Target Interface for Remote Handling”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE033, pp. 2278-2280.
[n] A. Dubrovin, “Time Stepping Klystron and Lasertron Simulations”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1050-1053.
[n] G. V. Stupakov, “Suppression of Beam Breakup Instability in a Long Train by Introducing Energy Spread Between the Bunches”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOE04, pp. 272-274.
[n] R. I. Farnsworth, C. A. Myers, and A. C. Starritt, “The Flange for Controls System to Internet Applications”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP106, pp. XX-XX.
[n] E. Quaranta, C. Bracco, R. Bruce, and S. Redaelli, “Validation of Simulation Tools for Fast Beam Failure Studies in the LHC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2506-2509. doi:10.18429/JACoW-IPAC2016-WEPMW033
[n] F. Rosatelli et al., “Design, Manufacturing and First Measurements of a Hybrid Permanent Magnet Undulator for Free Electron Laser”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2760-2763.
[n] D. P. Grote, A. Friedman, and I. Haber, “Three Dimensional Simulations of a Small Induction Recirculator Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR15, pp. 831-833.
[n] J. Berg et al., “Synchronizing the timing of the electron and Hadron storage rings in the Electron-Ion Collider”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 906-908. doi:10.18429/JACoW-IPAC2023-MOPL157
[n] M. C. Ross, J. T. Seeman, and R. L. Holtzapple, “Induced Beam Oscillations from Quadrupole Vibrations in the SLC Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3564-3567.
[n] B. J. King, S. S. Moser, R. J. Weggel, and N. V. Mokhov, “A Cupronickel Rotating Band Pion Production Target for Muon Colliders”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP38, pp. 3041-3043.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Sekutowicz, P. Kneisel, and G. Wu, “Development of Superstructures for High Current Application”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper MOP40, pp. 140-143.
- A. Almomani and U. Ratzinger, “Status and First Measurement Results for a High Gradient CH-Cavity”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3724-3726.
- J. Ruan, H. T. Edwards, and R. P. Fliller, “Flat Long Pulse Train Formation Using Multi-pass Structure”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC083, pp. 250-252.
- I. Petrushina et al., “Measurements of the Electrical Axes of the CeC PoP RF Cavities”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3031-3034.
- M. Comunian, F. Grespan, and A. Pisent, “ESS DTL Error Study”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP086, pp. 1047-1049.
- M. Holding, C. M. Hammons, B. R. Lang, G. R. Murdoch, K. G. Potter, and R. T. Roseberry, “Engineering the SNS RTBT/Target Interface for Remote Handling”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE033, pp. 2278-2280.
- A. Dubrovin, “Time Stepping Klystron and Lasertron Simulations”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1050-1053.
- G. V. Stupakov, “Suppression of Beam Breakup Instability in a Long Train by Introducing Energy Spread Between the Bunches”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOE04, pp. 272-274.
- R. I. Farnsworth, C. A. Myers, and A. C. Starritt, “The Flange for Controls System to Internet Applications”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP106, pp. XX-XX.
- E. Quaranta, C. Bracco, R. Bruce, and S. Redaelli, “Validation of Simulation Tools for Fast Beam Failure Studies in the LHC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2506-2509.
- F. Rosatelli et al., “Design, Manufacturing and First Measurements of a Hybrid Permanent Magnet Undulator for Free Electron Laser”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2760-2763.
- D. P. Grote, A. Friedman, and I. Haber, “Three Dimensional Simulations of a Small Induction Recirculator Accelerator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR15, pp. 831-833.
- J. Berg et al., “Synchronizing the timing of the electron and Hadron storage rings in the Electron-Ion Collider”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL157, pp. 906-908.
- M. C. Ross, J. T. Seeman, and R. L. Holtzapple, “Induced Beam Oscillations from Quadrupole Vibrations in the SLC Linac”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3564-3567.
- B. J. King, S. S. Moser, R. J. Weggel, and N. V. Mokhov, “A Cupronickel Rotating Band Pion Production Target for Muon Colliders”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP38, pp. 3041-3043.
Back to search