Favourites
For Word
[n] D. Lanaia, R. Muñoz Horta, and F. Pérez, “Status and Reliability Enhancements of the ALBA Linac”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 703-706. doi:10.18429/JACoW-LINAC2022-THPOJO07
[n] R. Keller and R. C. McCrady, “Magnet Hysteresis Control at LANSCE”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP017, pp. 601-603.
[n] Y. W. An, J. Chen, X. H. Lu, S. Y. Xu, J. B. Yu, and Y. Yuan, “Studies on Momentum Collimation for CSNS-RCS Upgrades”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1855-1857. doi:10.18429/JACoW-IPAC2021-TUPAB192
[n] M. Jensen, J. Alex, M. Maddock, M. Mueller, S. Rains, and A. V. Watkins, “First Results of the IOT Based 300 kW 500 MHz Amplifier for the Diamond Light Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT025, pp. 1883-1885.
[n] A. Kanekar et al., “FLASHForward: experimental progress towards an idealised plasma-based energy booster”, presented at the IPAC'23, Venice, Italy, May 2023, paper THODA2, unpublished.
[n] M. Morrone, C. Garion, P. Chiggiato, R. Kersevan, and S. Rorison, “Preliminary design of the FCC-ee vacuum chamber absorbers”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 382-385. doi:10.18429/JACoW-IPAC2023-MOPA141
[n] E. Salehi and M. Katoh, “Bayesian optimization of the dynamic aperture in UVSOR-IV design study”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 173-176. doi:10.18429/JACoW-IPAC2023-MOPA064
[n] R. M. Ronningen et al., “Radiation Simulations and Development of Concepts for High Power Beam Dumps, Catchers and Pre-separator Area Layouts for the Fragment Separators for RIA”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT063, pp. 3594-3596.
[n] F. Potepan, M. Mignacco, and G. Surace, “The Elettra Man-Machine Interface”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 460-463. doi:10.18429/JACoW-ICALEPCS1991-S13MMI04
[n] R. M. Ronningen et al., “Radiation Simulations for the Proposed ISOL Stations for RIA”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT062, pp. 3561-3563.
[n] A. A. Nosych, B. Bravo, and U. Iriso, “Energy Loss Measurements with Streak Camera at ALBA”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 548-551. doi:10.18429/JACoW-IBIC2018-THOB02
[n] S. Myalski et al., “Status of the Carbon Ion Source Commissioning at MedAustron”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 71-74. doi:10.18429/JACoW-ECRIS2018-TUP01
[n] F. Scarlat, “On Resonant Condition in a Grating Accelerator”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI024, pp. 954-956.
[n] S. Uhm, E. H. Choi, J. J. Ko, and H. M. Shin, “Influence of Ion Channel on Electron Beam Propagation”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9V044, pp. 1870-1872.
[n] D. Kalvik et al., “Ion-motion simulations of a plasma-wakefield experiment at FLASHForward”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1442-1445. doi:10.18429/JACoW-IPAC2025-TUPS013
[n] A. G. Chmielewski, W. Migdal, W. Macixzewski, and J. Lukasiewicz, “Control and Data Acquisition System of Electron Accelerator for Radiation Processing”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1890-1892.
[n] J. Upadhyay, K. Bishofberger, S. Kurennoy, J. Bernardin, J. Lyles, and J. Shoemaker, “Additive manufacturing of copper RF structures for particle accelerator applications”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 53-55. doi:10.18429/JACoW-IPAC2023-MOOG3
[n] M. Ross, T. Himel, N. Spencer, and D. McCormick, “Thermal Stabilization of Low Level RF Distribution Systems at SLAC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1975-1978.
[n] X. Liu, M. R. Adams, Y. He, and Y. Li, “Vacuum Pumping Performance Comparison of Non-Evaporable Getter Thin Films Deposited Using Argon and Krypton as Sputtering Gases”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE045, pp. 2860-2862.
[n] A. Buteau, M. O. Ounsy, and G. Abeille, “A Graphical Sequencer for SOLEIL Beamline Acquisitions”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB20, pp. 647-649.
[n] M. Deile et al., “Tests of a Roman Pot Prototype for the TOTEM Experiment”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP020, pp. 1701-1703.
[n] L. Rybarcyk and R. C. McCrady, “Beam-Based Alignment Measurements of the LANSCE Linac”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP67, pp. 420-422.
[n] L. Rossi, S. Mariotto, and S. Sorti, “Energy saving magnets for beam lines”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4986-4989. doi:10.18429/JACoW-IPAC2023-THPM043
[n] E. Willen et al., “Construction of Helical Magnets for RHIC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP89, pp. 3161-3163.
[n] J. Lewellen, C. Taylor, D. Dimitrov, G. Dale, J. Tapia, and J. Barraza, “An overview of the proton storage ring upgrade at LANSCE”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1669-1672. doi:10.18429/JACoW-IPAC2024-TUPS16
[n] S. Redaelli et al., “Crystal collimation of heavy-ion beams”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3927-3932. doi:10.18429/JACoW-IPAC2024-FRXN3
[n] E. L. Burgess et al., “A Long Pulse Linac for the Second Phase of DARHT”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP127, pp. 3257-3259.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Lanaia, R. Muñoz Horta, and F. Pérez, “Status and Reliability Enhancements of the ALBA Linac”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 703-706.
- R. Keller and R. C. McCrady, “Magnet Hysteresis Control at LANSCE”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP017, pp. 601-603.
- Y. W. An, J. Chen, X. H. Lu, S. Y. Xu, J. B. Yu, and Y. Yuan, “Studies on Momentum Collimation for CSNS-RCS Upgrades”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1855-1857.
- M. Jensen, J. Alex, M. Maddock, M. Mueller, S. Rains, and A. V. Watkins, “First Results of the IOT Based 300 kW 500 MHz Amplifier for the Diamond Light Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT025, pp. 1883-1885.
- A. Kanekar et al., “FLASHForward: experimental progress towards an idealised plasma-based energy booster”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THODA2, unpublished.
- M. Morrone, C. Garion, P. Chiggiato, R. Kersevan, and S. Rorison, “Preliminary design of the FCC-ee vacuum chamber absorbers”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA141, pp. 382-385.
- E. Salehi and M. Katoh, “Bayesian optimization of the dynamic aperture in UVSOR-IV design study”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA064, pp. 173-176.
- R. M. Ronningen et al., “Radiation Simulations and Development of Concepts for High Power Beam Dumps, Catchers and Pre-separator Area Layouts for the Fragment Separators for RIA”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPT063, pp. 3594-3596.
- F. Potepan, M. Mignacco, and G. Surace, “The Elettra Man-Machine Interface”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S13MMI04, pp. 460-463.
- R. M. Ronningen et al., “Radiation Simulations for the Proposed ISOL Stations for RIA”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPT062, pp. 3561-3563.
- A. A. Nosych, B. Bravo, and U. Iriso, “Energy Loss Measurements with Streak Camera at ALBA”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 548-551.
- S. Myalski et al., “Status of the Carbon Ion Source Commissioning at MedAustron”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 71-74.
- F. Scarlat, “On Resonant Condition in a Grating Accelerator”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI024, pp. 954-956.
- S. Uhm, E. H. Choi, J. J. Ko, and H. M. Shin, “Influence of Ion Channel on Electron Beam Propagation”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9V044, pp. 1870-1872.
- D. Kalvik et al., “Ion-motion simulations of a plasma-wakefield experiment at FLASHForward”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS013, pp. 1442-1445.
- A. G. Chmielewski, W. Migdal, W. Macixzewski, and J. Lukasiewicz, “Control and Data Acquisition System of Electron Accelerator for Radiation Processing”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1890-1892.
- J. Upadhyay, K. Bishofberger, S. Kurennoy, J. Bernardin, J. Lyles, and J. Shoemaker, “Additive manufacturing of copper RF structures for particle accelerator applications”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOOG3, pp. 53-55.
- M. Ross, T. Himel, N. Spencer, and D. McCormick, “Thermal Stabilization of Low Level RF Distribution Systems at SLAC”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1975-1978.
- X. Liu, M. R. Adams, Y. He, and Y. Li, “Vacuum Pumping Performance Comparison of Non-Evaporable Getter Thin Films Deposited Using Argon and Krypton as Sputtering Gases”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE045, pp. 2860-2862.
- A. Buteau, M. O. Ounsy, and G. Abeille, “A Graphical Sequencer for SOLEIL Beamline Acquisitions”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB20, pp. 647-649.
- M. Deile et al., “Tests of a Roman Pot Prototype for the TOTEM Experiment”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP020, pp. 1701-1703.
- L. Rybarcyk and R. C. McCrady, “Beam-Based Alignment Measurements of the LANSCE Linac”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP67, pp. 420-422.
- L. Rossi, S. Mariotto, and S. Sorti, “Energy saving magnets for beam lines”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM043, pp. 4986-4989.
- E. Willen et al., “Construction of Helical Magnets for RHIC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP89, pp. 3161-3163.
- J. Lewellen, C. Taylor, D. Dimitrov, G. Dale, J. Tapia, and J. Barraza, “An overview of the proton storage ring upgrade at LANSCE”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS16, pp. 1669-1672.
- S. Redaelli et al., “Crystal collimation of heavy-ion beams”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper FRXN3, pp. 3927-3932.
- E. L. Burgess et al., “A Long Pulse Linac for the Second Phase of DARHT”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP127, pp. 3257-3259.
Back to search