Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Xu, R. Fischetti, O. Makarov, S. A. Stepanov, and N. Venugopalan, “Mechanical Design of New Dual Pinhole Mini-Beam Collimator With Motorized Pitch and Yaw Adjuster Provides Lower Background for X-Ray Crystallography at GMCA@APS”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 387-389. doi:10.18429/JACoW-MEDSI2016-THAA03
[n] C. W. Leemann, “The CEBAF Superconducting Accelerator - An Overview”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TU2-3, pp. 194-199.
[n] D. Rees, J. Grippe, O. Marrufo, C. Ziomek, A. Regan, and E. Marsden, “Design and Results of the Radio Frequency Quadrupole RF System at the Superconducting Super Collider Laboratory”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3213-3216.
[n] E. A. Ludmirsky, V. A. Maisheev, Yu. S. Fedotov, A. A. Asseev, A. N. Vasil, and S. B. Nurushev, “About Extraction of 70-GeV Protons by a Bent Crystal from the IHEP Accelerator to the Proza Setup”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 315-318.
[n] J. T. Maniscalco, M. Ge, D. Gonnella, and M. Liepe, “Investigation of the Origin of the Anti-Q-Slope”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 218-220. doi:10.18429/JACoW-NAPAC2016-MOPOB65
[n] Y. Mori, “FFAG Developments in Japan”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper THA1CIO01, pp. 376-381.
[n] P. Li, J. X. Wu, Y. Q. Yang, and Y. J. Yuan, “The Design of Transverse Emittance Measurement at HIRFL-CSR”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP109, pp. 272-274.
[n] A. Lunin, A. Saini, N. Solyak, A. I. Sukhanov, and V. P. Yakovlev, “Alternative Cavity for H E Part of the Project X linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR029, pp. 2997-2999.
[n] R. Cary and G. Shasharina, “Expression Templates for Truncated Power Series”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P119, pp. 2654-2656.
[n] G. Bassi, A. Blednykh, V. V. Smaluk, and Z. Yang, “A Model to Simulate the Effect of a Transverse Feedback System on Single Bunch Instability Thresholds”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 596-598. doi:10.18429/JACoW-NAPAC2016-TUPOB45
[n] V. Baglin, I. R. Collins, O. Gr?Âbner, C. Gr??nhagel, and B. Jenninger, “Cryosorber Studies for the LHC Long Straight Section Beam Screens with COLDEX”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPDO010, pp. 2538-2540.
[n] F. Burkart et al., “Conceptual Design Considerations for the 50 TeV FCC Beam Dump Insertion”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1356-1359. doi:10.18429/JACoW-IPAC2016-TUPMR047
[n] H. J. Wang, H. T. Jing, H. Qu, and J. Y. Tang, “Design of High-power Graphene Beam Window”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 45-47. doi:10.18429/JACoW-IPAC2014-MOOCA03
[n] R. K. Bhandari and J. Reich, “The Beam Handling and Axial Injection System for the Project ISIS at JULIC”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper DC-03, pp. 261-265.
[n] B. Yee-Rend??n, “Overview of ADS Projects in the World”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 310-313. doi:10.18429/JACoW-LINAC2022-TU2AA01
[n] Y. Luo, Y. Dutheil, H. Huang, F. Meot, and V. H. Ranjbar, “Proton Spin Tracking with Symplectic Integration of Orbit Motion”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 766-768. doi:10.18429/JACoW-IPAC2015-MOPMN030
[n] E.Levichev, V.Parkhomchuk, S.Rastigeev, A.Skrinsky, V.Vostrikov (Budker Institute of Nuclear Physics, Novosibirsk, Russia), M.Kumada (NIRS, Chiba, Japan), “CARBON ION ACCELERATOR FACILITY FOR CANCER THERAPY”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper MOLP13, pp. XX-XX.
[n] Y. Wang et al., “Improvment of the Storage Ring UHV System of NSRL”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPE032, pp. 815-817.
[n] D. Xiang, “Accelerator Based Ultrafast Electron Diffraction and Microscopy at SJTU”, in Proc. SAP'14, Lanzhou, China, Aug. 2014, paper WEPMH5, pp. 26-28.
[n] B. Yu. Bogdanovich, V. I. Kaminsky, V. A. Senyukov, and A. V. Nesterovich, “Small-Sized Electron Linear RF Accelerator with Beam Autoacceleration for Geology and Industry”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P115, pp. 3869-3871.
[n] M. Thieme et al., “Semantic Regression for Disentangling Beam Losses in the Fermilab Main Injector and Recycler”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 112-115. doi:10.18429/JACoW-NAPAC2022-MOPA28
[n] J. Eberhardt, F. Caspers, and C. Vollinger, “Preliminary Design of a Perpendicular Biased Ferrite Loaded Accelerating Cavity”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3163-3166. doi:10.18429/JACoW-IPAC2015-WEPHA024
[n] P. Kowina, P. Forck, W. Kaufmann, P. Moritz, T. Weiland, and F. Wolfheimer, “FEM Simulations - a Powerful Tool for BPM Design”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOOC03, pp. 35-37.
[n] D. Gupta, S. Aggarwal, R. Singhal, and G. R. Umapathy, “Ripple Pattern Formation on Silicon Carbide Surfaces by Low-Energy Ion-Beam Erosion”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3045-3048. doi:10.18429/JACoW-IPAC2022-THPOMS037
[n] K. W. Shepard, Z. A. Conway, J. D. Fuerst, M. Kedzie, and M. P. Kelly, “Prototype Superconducting Triple-Spoke Cavity for Beta = 0.63”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT099, pp. 4338-4340.
[n] I. Podadera et al., “The IFMIF-DONES facility: a fusion-oriented 5 MW superconducting CW linear accelerator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2599-2604. doi:10.18429/JACoW-IPAC2023-WEYG1
[n] C. Burkhart et al., “ILC Marx Modulator Development Program Status”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP090, pp. 1757-1759.
[n] P. Boonpornprasert, G. Z. Georgiev, M. Krasilnikov, X.-K. Li, and A. Lueangaramwong, “Simulation Study of an Accelerator-based THz FEL for Pump-Probe Experiments at the European XFEL”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 83-86. doi:10.18429/JACoW-LINAC2022-MOPOPA04
[n] L. Sabbatini, D. Alesini, A. Falone, A. Gallo, and V. Pettinacci, “LATINO: A Laboratory in Advanced Technologies for Innovation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3466-3468. doi:10.18429/JACoW-IPAC2019-THPMP009
[n] A. Baan et al., “The S.I.N. Injector Cyclotron”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 257-260.
[n] S. Henderson and S. Roberts, “A Method for Gold Coating Experimental Detector Beampipes”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA118, pp. 1351-1353.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Xu, R. Fischetti, O. Makarov, S. A. Stepanov, and N. Venugopalan, “Mechanical Design of New Dual Pinhole Mini-Beam Collimator With Motorized Pitch and Yaw Adjuster Provides Lower Background for X-Ray Crystallography at GMCA@APS”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 387-389.
- C. W. Leemann, “The CEBAF Superconducting Accelerator - An Overview”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TU2-3, pp. 194-199.
- D. Rees, J. Grippe, O. Marrufo, C. Ziomek, A. Regan, and E. Marsden, “Design and Results of the Radio Frequency Quadrupole RF System at the Superconducting Super Collider Laboratory”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3213-3216.
- E. A. Ludmirsky, V. A. Maisheev, Yu. S. Fedotov, A. A. Asseev, A. N. Vasil, and S. B. Nurushev, “About Extraction of 70-GeV Protons by a Bent Crystal from the IHEP Accelerator to the Proza Setup”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 315-318.
- J. T. Maniscalco, M. Ge, D. Gonnella, and M. Liepe, “Investigation of the Origin of the Anti-Q-Slope”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 218-220.
- Y. Mori, “FFAG Developments in Japan”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper THA1CIO01, pp. 376-381.
- P. Li, J. X. Wu, Y. Q. Yang, and Y. J. Yuan, “The Design of Transverse Emittance Measurement at HIRFL-CSR”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP109, pp. 272-274.
- A. Lunin, A. Saini, N. Solyak, A. I. Sukhanov, and V. P. Yakovlev, “Alternative Cavity for H E Part of the Project X linac”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR029, pp. 2997-2999.
- R. Cary and G. Shasharina, “Expression Templates for Truncated Power Series”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P119, pp. 2654-2656.
- G. Bassi, A. Blednykh, V. V. Smaluk, and Z. Yang, “A Model to Simulate the Effect of a Transverse Feedback System on Single Bunch Instability Thresholds”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 596-598.
- V. Baglin, I. R. Collins, O. Gr?Âbner, C. Gr??nhagel, and B. Jenninger, “Cryosorber Studies for the LHC Long Straight Section Beam Screens with COLDEX”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPDO010, pp. 2538-2540.
- F. Burkart et al., “Conceptual Design Considerations for the 50 TeV FCC Beam Dump Insertion”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1356-1359.
- H. J. Wang, H. T. Jing, H. Qu, and J. Y. Tang, “Design of High-power Graphene Beam Window”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 45-47.
- R. K. Bhandari and J. Reich, “The Beam Handling and Axial Injection System for the Project ISIS at JULIC”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper DC-03, pp. 261-265.
- B. Yee-Rend??n, “Overview of ADS Projects in the World”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 310-313.
- Y. Luo, Y. Dutheil, H. Huang, F. Meot, and V. H. Ranjbar, “Proton Spin Tracking with Symplectic Integration of Orbit Motion”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 766-768.
- E.Levichev, V.Parkhomchuk, S.Rastigeev, A.Skrinsky, V.Vostrikov (Budker Institute of Nuclear Physics, Novosibirsk, Russia), M.Kumada (NIRS, Chiba, Japan), “CARBON ION ACCELERATOR FACILITY FOR CANCER THERAPY”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper MOLP13, pp. XX-XX.
- Y. Wang et al., “Improvment of the Storage Ring UHV System of NSRL”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPE032, pp. 815-817.
- D. Xiang, “Accelerator Based Ultrafast Electron Diffraction and Microscopy at SJTU”, in Proc. 12th Symposium on Accelerator Physics (SAP'14), Lanzhou, China, Aug. 2014, paper WEPMH5, pp. 26-28.
- B. Yu. Bogdanovich, V. I. Kaminsky, V. A. Senyukov, and A. V. Nesterovich, “Small-Sized Electron Linear RF Accelerator with Beam Autoacceleration for Geology and Industry”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P115, pp. 3869-3871.
- M. Thieme et al., “Semantic Regression for Disentangling Beam Losses in the Fermilab Main Injector and Recycler”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 112-115.
- J. Eberhardt, F. Caspers, and C. Vollinger, “Preliminary Design of a Perpendicular Biased Ferrite Loaded Accelerating Cavity”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3163-3166.
- P. Kowina, P. Forck, W. Kaufmann, P. Moritz, T. Weiland, and F. Wolfheimer, “FEM Simulations - a Powerful Tool for BPM Design”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper MOOC03, pp. 35-37.
- D. Gupta, S. Aggarwal, R. Singhal, and G. R. Umapathy, “Ripple Pattern Formation on Silicon Carbide Surfaces by Low-Energy Ion-Beam Erosion”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 3045-3048.
- K. W. Shepard, Z. A. Conway, J. D. Fuerst, M. Kedzie, and M. P. Kelly, “Prototype Superconducting Triple-Spoke Cavity for Beta = 0.63”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT099, pp. 4338-4340.
- I. Podadera et al., “The IFMIF-DONES facility: a fusion-oriented 5 MW superconducting CW linear accelerator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEYG1, pp. 2599-2604.
- C. Burkhart et al., “ILC Marx Modulator Development Program Status”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP090, pp. 1757-1759.
- P. Boonpornprasert, G. Z. Georgiev, M. Krasilnikov, X.-K. Li, and A. Lueangaramwong, “Simulation Study of an Accelerator-based THz FEL for Pump-Probe Experiments at the European XFEL”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 83-86.
- L. Sabbatini, D. Alesini, A. Falone, A. Gallo, and V. Pettinacci, “LATINO: A Laboratory in Advanced Technologies for Innovation”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3466-3468.
- A. Baan et al., “The S.I.N. Injector Cyclotron”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 257-260.
- S. Henderson and S. Roberts, “A Method for Gold Coating Experimental Detector Beampipes”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA118, pp. 1351-1353.
Back to search