Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. Karantzoulis, “Multibunch Instability Investigation on a Cavity”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1782-1785.
[n] E. Karantzoulis, “Optiks: An Optics Measurement and Correction Program for ELETTRA”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1012-1015.
[n] E. Karantzoulis et al., “Observation of Instabilities in the ELETTRA Storage Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 119-122.
[n] T. Hoff, “Object Oriented Programming Interfaces for Accelerator Control”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5C001, pp. 2395-2397.
[n] A. Lueangaramwong, J. Hares, I.P.S. Martin, and R. Fielder, “A Kick-and-Cancel injection scheme for Diamond-II”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3240-3243. doi:10.18429/JACoW-IPAC2024-THPG01
[n] B. Dhital et al., “An automated quad scan based emittance measurement software”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3453-3456. doi:10.18429/JACoW-IPAC2024-THPG79
[n] B. Lorbeer, N. Baboi, L. P. Petrosyan, and F. Schmidt-Foehre, “Design, Development and Commissioning of a MTCA-Based Button and Strip-Line BPM System for FLASH2”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPF08, pp. 320-323.
[n] J. W. Flanagan, “Review of Recent Status of Coded Aperture X-ray Monitors for Beam Size Measurement”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 361-365. doi:10.18429/JACoW-IBIC2018-WEOC02
[n] E. Koukovini-Platia and G. Rumolo, “Review of the Transverse Impedance Budget for the CLIC Damping Rings”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1701-1703. doi:10.18429/JACoW-IPAC2014-TUPRI057
[n] B. Lorbeer, N. Baboi, H. T. Duhme, F. Schmidt-Foehre, and K. Wittenburg, “Development Status and Performance Studies of the New MicroTCA Based Button and Strip-line BPM Electronics at FLASH 2”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 335-338. doi:10.18429/JACoW-IBIC2015-TUPB014
[n] A. Zeller, V. Blideanu, R. C. Gupta, R. M. Ronningen, and B. Sherrill, “Radiation Resistant Magnets for the RIA Fragment Separator”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT031, pp. 2200-2202.
[n] E. Schulz et al., “Engineering Solutions for the Electro-polishing of Multi-cell Superconducting Accelerator Structures”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT010, pp. XX-XX.
[n] R. C. Gupta, M. Anerella, M. Harrison, W. Sampson, J. Schmalzle, and A. Zeller, “Test Results of HTS Coil and Magnet RD for RIA”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT048, pp. 3016-3018.
[n] A. Valloni et al., “Strawman Optics Design for the CERN LHeC ERL Test Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME055, pp. 1694-1696.
[n] P. Chen, “Quantum Aspects of Beam Physics”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUCR1, pp. 224-228.
[n] Z. Fang, I. I. Averboukh, K. Egawa, K. Endo, and T. Hirashima, “RF Cavities and Power Amplifier for the Compact Proton Synchrotron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG028, pp. 1074-1076.
[n] M. Yamamoto et al., “Extreme High Vacuum System of High Brightness Electron Source for ERL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUODB02, pp. 979-981.
[n] O. V. Sinitsyn, T. M. Antonsen, and G. S. Nusinovich, “Self-consistent Time-dependent Quasi-3D Model of Multipactor in Dielectric-loaded Accelerating Structures”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC041, pp. 1090-1092.
[n] R. J. Bakker, “Status and Commissioning-Results of BESSY II”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUCL3, pp. 197-199.
For LaTeX
Use Complete Form
For BibTeX
References
- E. Karantzoulis, “Multibunch Instability Investigation on a Cavity”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1782-1785.
- E. Karantzoulis, “Optiks: An Optics Measurement and Correction Program for ELETTRA”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1012-1015.
- E. Karantzoulis et al., “Observation of Instabilities in the ELETTRA Storage Ring”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 119-122.
- T. Hoff, “Object Oriented Programming Interfaces for Accelerator Control”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5C001, pp. 2395-2397.
- A. Lueangaramwong, J. Hares, I.P.S. Martin, and R. Fielder, “A Kick-and-Cancel injection scheme for Diamond-II”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, pp. 3240-3243.
- B. Dhital et al., “An automated quad scan based emittance measurement software”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG79, pp. 3453-3456.
- B. Lorbeer, N. Baboi, L. P. Petrosyan, and F. Schmidt-Foehre, “Design, Development and Commissioning of a MTCA-Based Button and Strip-Line BPM System for FLASH2”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper TUPF08, pp. 320-323.
- J. W. Flanagan, “Review of Recent Status of Coded Aperture X-ray Monitors for Beam Size Measurement”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 361-365.
- E. Koukovini-Platia and G. Rumolo, “Review of the Transverse Impedance Budget for the CLIC Damping Rings”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1701-1703.
- B. Lorbeer, N. Baboi, H. T. Duhme, F. Schmidt-Foehre, and K. Wittenburg, “Development Status and Performance Studies of the New MicroTCA Based Button and Strip-line BPM Electronics at FLASH 2”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 335-338.
- A. Zeller, V. Blideanu, R. C. Gupta, R. M. Ronningen, and B. Sherrill, “Radiation Resistant Magnets for the RIA Fragment Separator”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT031, pp. 2200-2202.
- E. Schulz et al., “Engineering Solutions for the Electro-polishing of Multi-cell Superconducting Accelerator Structures”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT010, pp. XX-XX.
- R. C. Gupta, M. Anerella, M. Harrison, W. Sampson, J. Schmalzle, and A. Zeller, “Test Results of HTS Coil and Magnet RD for RIA”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT048, pp. 3016-3018.
- A. Valloni et al., “Strawman Optics Design for the CERN LHeC ERL Test Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME055, pp. 1694-1696.
- P. Chen, “Quantum Aspects of Beam Physics”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUCR1, pp. 224-228.
- Z. Fang, I. I. Averboukh, K. Egawa, K. Endo, and T. Hirashima, “RF Cavities and Power Amplifier for the Compact Proton Synchrotron”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPG028, pp. 1074-1076.
- M. Yamamoto et al., “Extreme High Vacuum System of High Brightness Electron Source for ERL”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUODB02, pp. 979-981.
- O. V. Sinitsyn, T. M. Antonsen, and G. S. Nusinovich, “Self-consistent Time-dependent Quasi-3D Model of Multipactor in Dielectric-loaded Accelerating Structures”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC041, pp. 1090-1092.
- R. J. Bakker, “Status and Commissioning-Results of BESSY II”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUCL3, pp. 197-199.
Back to search