Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Andelfinger et al., “Status Report of the Experimental and Theoretical Investigations in the Garching Electron Ring Accelerator”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4172-4177.
[n] A. Gotz et al., “TANGO Heads for Industry”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1195-1200. doi:10.18429/JACoW-ICALEPCS2017-THCPL05
[n] U. Becker, “CST's Commercial Beam-Physics Codes”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper THM2IS03, pp. 308-308.
[n] I. Ben-Zvi and D. Naik, “Ripple Structure in 56 MHz Quarter Wave Resonator for Multipacting Suppression”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP037, pp. 903-905.
[n] O. Kamalou, F. Chautard, and A. Savalle, “Stable and Exotic Beams Produced at GANIL”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 398-400. doi:10.18429/JACoW-Cyclotrons2016-FRB02
[n] A. Wolf et al., “Results from Electron Cooling Experiments at LEAR”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 204-207.
[n] S. C. Duarte Pinto and J. Spanggaard, “Gas Electron Multipliers Versus Multi Wire Proportional Chambers”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUCL3, pp. 342-345.
[n] O. Kamalou et al., “GANIL Operation Status and New Range of Post-Accelerated Exotic Beams”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOA1C02, pp. 20-22.
[n] H. Reichau, O. Meusel, U. Ratzinger, and C. Wagner, “Optical Diagnostics for Frankfurt Neutron Source”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD60, pp. 443-445.
[n] P. Emma, P. R. Burchat, T. H. Fieguth, T. Lohse, and R. S. Panvini, “Online Monitoring of Dispersion Functions and Transfer Matrices at the SLC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1599-1602.
[n] D. A. Liakin, P. Forck, K. Lang, and R. Singh, “Advanced Digital Signal Processing for Effective Beam Position Monitoring”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD16, pp. 74-76.
[n] D. Gonnella et al., “RF Performance of Nitrogen-Doped Production SRF Cavities for LCLS-II”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1156-1159. doi:10.18429/JACoW-IPAC2017-MOPVA128
[n] N. Samadi, L. D. Chapman, L. O. Dallin, and X. Shi, “Source Size and Emittance Measurements for Low-Emittance Light Sources”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper THAO03, unpublished.
[n] G. T. Danby and J. W. Jackson, “Theory, Design and Measurement of the Brookhaven Narrow Quadrupoles”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 414-420.
[n] L. W. Funk, J. F. Tooker, T. Benke, and V. Oliphant, “Accelerator Readiness Review Process for the SSC Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1706-1709.
[n] U. Becker, “CST's Commercial Beam-Physics Codes”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WESEPP01, pp. 228-228.
[n] W. B. Herrmannsfeldt, “Linac Alignment Techniques”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 9-19.
[n] M. Giannini et al., “ELETTRA" Vacuum Chamber Design and Fabrication"”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2488-2491.
[n] V. Paxson, C. Aragon, S. Peggs, C. Saltmarsh, and L. Schachinger, “A Unified Approach to Building Accelerator Simulation Software for the SSC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 82-85.
[n] F. Varenne et al., “SPIRAL Facility: Beam Dynamics and Experimental Tests with Stable Ions”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P2-23, pp. XX-XX.
[n] B. Rusnak et al., “Development of a High Brightness Source for Fast Neutron Imaging”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1260-1264. doi:10.18429/JACoW-NAPAC2016-THB3IO01
[n] Q. Qin et al., “Overview of the CEPC Accelerator”, in Proc. HF'14, Beijing, China, Oct. 2014, paper THP3H2, pp. 16-21.
[n] D. Cocq et al., “First Beam Tests for the Prototype LHC Orbit and Trajectory System in the CERN-SPS”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PM17, pp. XX-XX.
[n] C. Gardner, L. Ahrens, and N. Williams, “Turn-by-Turn Analysis of Proton and Gold Beams at Injection in the AGS Booster”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA79, pp. 2063-2065.
[n] C. M. Ankenbrandt, J. E. Griffin, R. P. Johnson, J. Lackey, and K. Meisner, “Longitudinal Motion of the Beam in the Fermilab Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1449-1452.
[n] H. Hahn, L. R. Hammons, and D. Naik, “Ferrite-lined HOM Absorber for the e-Cool ERL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS095, pp. 3705-3707.
[n] R. Kazimi et al., “CEBAF Injector Achieved World's Best Beam Quality for Three Simultaneous Beams with a Wide Range of Bunch Charges”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT164, pp. 1512-1514.
[n] H. Grote, F. C. Iselin, E. Keil, and J. Niederer, “The MAD Program”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1292-1295.
[n] S. Rubio-Manrique et al., “Reproduce Anything, Anywhere: A Generic Simulation Suite for Tango Control Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 280-284. doi:10.18429/JACoW-ICALEPCS2017-TUDPL01
For LaTeX
Use Complete Form
For BibTeX
References
- C. Andelfinger et al., “Status Report of the Experimental and Theoretical Investigations in the Garching Electron Ring Accelerator”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4172-4177.
- A. Gotz et al., “TANGO Heads for Industry”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1195-1200.
- U. Becker, “CST's Commercial Beam-Physics Codes”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper THM2IS03, pp. 308-308.
- I. Ben-Zvi and D. Naik, “Ripple Structure in 56 MHz Quarter Wave Resonator for Multipacting Suppression”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP037, pp. 903-905.
- O. Kamalou, F. Chautard, and A. Savalle, “Stable and Exotic Beams Produced at GANIL”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 398-400.
- A. Wolf et al., “Results from Electron Cooling Experiments at LEAR”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 204-207.
- S. C. Duarte Pinto and J. Spanggaard, “Gas Electron Multipliers Versus Multi Wire Proportional Chambers”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUCL3, pp. 342-345.
- O. Kamalou et al., “GANIL Operation Status and New Range of Post-Accelerated Exotic Beams”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOA1C02, pp. 20-22.
- H. Reichau, O. Meusel, U. Ratzinger, and C. Wagner, “Optical Diagnostics for Frankfurt Neutron Source”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD60, pp. 443-445.
- P. Emma, P. R. Burchat, T. H. Fieguth, T. Lohse, and R. S. Panvini, “Online Monitoring of Dispersion Functions and Transfer Matrices at the SLC”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1599-1602.
- D. A. Liakin, P. Forck, K. Lang, and R. Singh, “Advanced Digital Signal Processing for Effective Beam Position Monitoring”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD16, pp. 74-76.
- D. Gonnella et al., “RF Performance of Nitrogen-Doped Production SRF Cavities for LCLS-II”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1156-1159.
- N. Samadi, L. D. Chapman, L. O. Dallin, and X. Shi, “Source Size and Emittance Measurements for Low-Emittance Light Sources”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper THAO03, unpublished.
- G. T. Danby and J. W. Jackson, “Theory, Design and Measurement of the Brookhaven Narrow Quadrupoles”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 414-420.
- L. W. Funk, J. F. Tooker, T. Benke, and V. Oliphant, “Accelerator Readiness Review Process for the SSC Linac”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1706-1709.
- U. Becker, “CST's Commercial Beam-Physics Codes”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WESEPP01, pp. 228-228.
- W. B. Herrmannsfeldt, “Linac Alignment Techniques”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 9-19.
- M. Giannini et al., “ELETTRA" Vacuum Chamber Design and Fabrication"”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2488-2491.
- V. Paxson, C. Aragon, S. Peggs, C. Saltmarsh, and L. Schachinger, “A Unified Approach to Building Accelerator Simulation Software for the SSC”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 82-85.
- F. Varenne et al., “SPIRAL Facility: Beam Dynamics and Experimental Tests with Stable Ions”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P2-23, pp. XX-XX.
- B. Rusnak et al., “Development of a High Brightness Source for Fast Neutron Imaging”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1260-1264.
- Q. Qin et al., “Overview of the CEPC Accelerator”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper THP3H2, pp. 16-21.
- D. Cocq et al., “First Beam Tests for the Prototype LHC Orbit and Trajectory System in the CERN-SPS”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PM17, pp. XX-XX.
- C. Gardner, L. Ahrens, and N. Williams, “Turn-by-Turn Analysis of Proton and Gold Beams at Injection in the AGS Booster”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA79, pp. 2063-2065.
- C. M. Ankenbrandt, J. E. Griffin, R. P. Johnson, J. Lackey, and K. Meisner, “Longitudinal Motion of the Beam in the Fermilab Booster”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1449-1452.
- H. Hahn, L. R. Hammons, and D. Naik, “Ferrite-lined HOM Absorber for the e-Cool ERL”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS095, pp. 3705-3707.
- R. Kazimi et al., “CEBAF Injector Achieved World's Best Beam Quality for Three Simultaneous Beams with a Wide Range of Bunch Charges”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT164, pp. 1512-1514.
- H. Grote, F. C. Iselin, E. Keil, and J. Niederer, “The MAD Program”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1292-1295.
- S. Rubio-Manrique et al., “Reproduce Anything, Anywhere: A Generic Simulation Suite for Tango Control Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 280-284.
Back to search