Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. M. Pischalnikov et al., “Operation of an SRF Cavity Tuner Submerged into Liquid He”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 660-663. doi:10.18429/JACoW-SRF2019-TUP085
[n] M. Parise, P. Duchesne, D. Longuevergne, D. Passarelli, D. Reynet, and F. Ruiu, “Mechanical Design and Fabrication Aspects of Prototype SSR2 Jacketed Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 424-429. doi:10.18429/JACoW-SRF2019-TUP014
[n] D. P. May et al., “Status of the Texas AM K500 Superconducting Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper F05, pp. 267-270.
[n] P. Lotrus et al., “Status of the GBAR control project at CERN”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 531-533. doi:10.18429/JACoW-ICALEPCS2017-TUPHA059
[n] T. Milosic, P. Forck, and D. A. Liakin, “Longitudinal Emittance Measurement Using Particle Detectors”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD18, pp. 330-332.
[n] T. Budd, F. Sartori, and R. C. Felton, “Real-Time Measurement and Control at JET -- Status 2007”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA22, pp. 362-364.
[n] M. P. Crouch et al., “Dynamic Aperture Studies of the Long-Range Beam-Beam Interaction at the LHC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3840-3843. doi:10.18429/JACoW-IPAC2017-THPAB056
[n] A. Malygin, O. Manzhura, A.-S. M??ller, R. Ruprecht, M. Schuh, and N. J. Smale, “Status of the FLUTE RF System Upgrade”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2452-2453. doi:10.18429/JACoW-IPAC2022-THPOST008
[n] A. Wu, “Investigation of Oxide Layer Structure on Niobium Surfaces Using a Secondary Ion Mass Spectrometer”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP08, pp. 251-253.
[n] C. Prados, J. N. Bai, A. Hahn, and A. Suresh, “A Reliable White Rabbit Network for the FAIR General Timing Machine”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 627-632. doi:10.18429/JACoW-ICALEPCS2017-TUPHA091
[n] H. Horiike, M. R. Asakawa, M. Heya, Y. Naito, and S. Suzuki, “Status of Institute of Free Electron Laser, Osaka university”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS17, pp. XX-XX.
[n] F. Hinode, J. Urakawa, and Y. Yoribayashi, “A Conventional Read-Out Electronics of Button-Type BPM in the ATF Damping Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W008, pp. 578-580.
[n] J. Fernandez Cortes, E. Blanco Vinuela, and L. A. Gonzalez, “Industrial Stepping Motors Integration in the UNICOS-CPC Framework”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1720-1724. doi:10.18429/JACoW-ICALEPCS2017-THPHA144
[n] K. Manukyan, B. Diviacco, E. Karantzoulis, S. Dastan, S. Di Mitri, and S. Krecic, “The effect of insertion devices on beam dynamics for Elettra 2.0”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3321-3324. doi:10.18429/JACoW-IPAC2023-WEPL094
[n] A. Pisent et al., “Design optimization for the construction of a linear accelerator driven BNCT facility”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL132, unpublished.
[n] T.Birke,B.Franksen,B.Kuner,R.Lange,P.Laux,R.M??ller,G.Pfeiffer,J.Rahn, “Beyond Devices - An improved RDB Data-Model for Configuration Management”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_078.
[n] A. Hershcovitch et al., “Device and Technique for In-situ Coating of the RHIC Cold Bore Vacuum Tubes with Thick OFHC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI093, pp. 3508-3510.
[n] P. Dhakal, G. Ciovati, and G. R. Myneni, “Evaluation of High Performance Large Grain Medium Purity SRF Cavity From KEK”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 415-418. doi:10.18429/JACoW-SRF2019-TUP012
[n] G. Ciullo, A. Dainelli, V. Guidi, A. M. Pilati, and B. Yang, “Time Correlation Studies of Secondary Emission Processes”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP038L, pp. 1636-1638.
[n] P. Attal, E. Baron, C. Bieth, M. P. Bourgarel, R. Gayraud, and C. Pagani, “The GANIL Injector Design”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-16, pp. 1944-1947.
[n] J. Tamura et al., “Electromagnetic Design of the Prototype Spoke Cavity for the JAEA-ADS Linac”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 399-402. doi:10.18429/JACoW-SRF2019-TUP007
[n] K. S. White and M. H. Bickley, “Control System Segmentation”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPB009, pp. 283-285.
[n] Y. S. Derbenev et al., “ELIC at CEBAF”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP015, pp. 1437-1439.
[n] G. C. L. van Heusden, R. Ahgren, G. Hinderer, and W. M. Schulte, “A Multi-Input Phase Measuring System”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper D-22, pp. 2209-2211.
[n] W. Kells, J. Marriner, S. Mtingwa, and R. Pasquinelli, “Performance of Tevatron I Core Stochastic Cooling Systems”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1090-1093.
[n] K. Yu and V. Samulyak, “SPACE Code for Beam-Plasma Interaction”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 728-730. doi:10.18429/JACoW-IPAC2015-MOPMN012
[n] M. Leitner et al., “Design Status of the SRF Linac Systems for the Facility for Rare Isotope Beams”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO009, pp. 56-64.
[n] S. Sarkar, P. Bennett, Y. Miles, M. Mouat, A. Purvis, and W. Roberts, “Vax Q-Bus to CAMAC Systems Crate Interface for Long Camac Branches”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1690-1693.
[n] P. Krejcik, D. Pritzkau, T. Raubenheimer, M. Ross, and F. Zimmermann, “Ion Effects in the SLC Electron Damping Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2V018, pp. 1626-1628.
[n] Y.-M. Kim, W.-J. Cho, Y.-S. Hwang, E.-J. Oh, and M.-H. Jung, “Real-time 100 MeV proton beam monitoring system for radioisotope production at KOMAC”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPG60, unpublished.
[n] B. Cauvin and J. P. Fouan, “Status Report on the Saclay Heavy Ion Superconducting Linac”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89B06, pp. XX-XX.
[n] A. Markin, V. Chubrik, S. Ivanov, O. Lebedev, and I. Sulygin, “UPGRADE OF FEEDBACK LOOPS IN ACCELERATING CAVITIES OF THE U70”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEAPH05, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. M. Pischalnikov et al., “Operation of an SRF Cavity Tuner Submerged into Liquid He”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 660-663.
- M. Parise, P. Duchesne, D. Longuevergne, D. Passarelli, D. Reynet, and F. Ruiu, “Mechanical Design and Fabrication Aspects of Prototype SSR2 Jacketed Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 424-429.
- D. P. May et al., “Status of the Texas AM K500 Superconducting Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper F05, pp. 267-270.
- P. Lotrus et al., “Status of the GBAR control project at CERN”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 531-533.
- T. Milosic, P. Forck, and D. A. Liakin, “Longitudinal Emittance Measurement Using Particle Detectors”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD18, pp. 330-332.
- T. Budd, F. Sartori, and R. C. Felton, “Real-Time Measurement and Control at JET -- Status 2007”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPA22, pp. 362-364.
- M. P. Crouch et al., “Dynamic Aperture Studies of the Long-Range Beam-Beam Interaction at the LHC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3840-3843.
- A. Malygin, O. Manzhura, A.-S. M??ller, R. Ruprecht, M. Schuh, and N. J. Smale, “Status of the FLUTE RF System Upgrade”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2452-2453.
- A. Wu, “Investigation of Oxide Layer Structure on Niobium Surfaces Using a Secondary Ion Mass Spectrometer”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP08, pp. 251-253.
- C. Prados, J. N. Bai, A. Hahn, and A. Suresh, “A Reliable White Rabbit Network for the FAIR General Timing Machine”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 627-632.
- H. Horiike, M. R. Asakawa, M. Heya, Y. Naito, and S. Suzuki, “Status of Institute of Free Electron Laser, Osaka university”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THPOS17, pp. XX-XX.
- F. Hinode, J. Urakawa, and Y. Yoribayashi, “A Conventional Read-Out Electronics of Button-Type BPM in the ATF Damping Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2W008, pp. 578-580.
- J. Fernandez Cortes, E. Blanco Vinuela, and L. A. Gonzalez, “Industrial Stepping Motors Integration in the UNICOS-CPC Framework”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1720-1724.
- K. Manukyan, B. Diviacco, E. Karantzoulis, S. Dastan, S. Di Mitri, and S. Krecic, “The effect of insertion devices on beam dynamics for Elettra 2.0”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL094, pp. 3321-3324.
- A. Pisent et al., “Design optimization for the construction of a linear accelerator driven BNCT facility”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL132, unpublished.
- T.Birke,B.Franksen,B.Kuner,R.Lange,P.Laux,R.M??ller,G.Pfeiffer,J.Rahn, “Beyond Devices - An improved RDB Data-Model for Configuration Management”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_078.
- A. Hershcovitch et al., “Device and Technique for In-situ Coating of the RHIC Cold Bore Vacuum Tubes with Thick OFHC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI093, pp. 3508-3510.
- P. Dhakal, G. Ciovati, and G. R. Myneni, “Evaluation of High Performance Large Grain Medium Purity SRF Cavity From KEK”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 415-418.
- G. Ciullo, A. Dainelli, V. Guidi, A. M. Pilati, and B. Yang, “Time Correlation Studies of Secondary Emission Processes”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP038L, pp. 1636-1638.
- P. Attal, E. Baron, C. Bieth, M. P. Bourgarel, R. Gayraud, and C. Pagani, “The GANIL Injector Design”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-16, pp. 1944-1947.
- J. Tamura et al., “Electromagnetic Design of the Prototype Spoke Cavity for the JAEA-ADS Linac”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 399-402.
- K. S. White and M. H. Bickley, “Control System Segmentation”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOPB009, pp. 283-285.
- Y. S. Derbenev et al., “ELIC at CEBAF”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP015, pp. 1437-1439.
- G. C. L. van Heusden, R. Ahgren, G. Hinderer, and W. M. Schulte, “A Multi-Input Phase Measuring System”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper D-22, pp. 2209-2211.
- W. Kells, J. Marriner, S. Mtingwa, and R. Pasquinelli, “Performance of Tevatron I Core Stochastic Cooling Systems”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1090-1093.
- K. Yu and V. Samulyak, “SPACE Code for Beam-Plasma Interaction”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 728-730.
- M. Leitner et al., “Design Status of the SRF Linac Systems for the Facility for Rare Isotope Beams”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO009, pp. 56-64.
- S. Sarkar, P. Bennett, Y. Miles, M. Mouat, A. Purvis, and W. Roberts, “Vax Q-Bus to CAMAC Systems Crate Interface for Long Camac Branches”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1690-1693.
- P. Krejcik, D. Pritzkau, T. Raubenheimer, M. Ross, and F. Zimmermann, “Ion Effects in the SLC Electron Damping Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2V018, pp. 1626-1628.
- Y.-M. Kim, W.-J. Cho, Y.-S. Hwang, E.-J. Oh, and M.-H. Jung, “Real-time 100 MeV proton beam monitoring system for radioisotope production at KOMAC”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG60, unpublished.
- B. Cauvin and J. P. Fouan, “Status Report on the Saclay Heavy Ion Superconducting Linac”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89B06, pp. XX-XX.
- A. Markin, V. Chubrik, S. Ivanov, O. Lebedev, and I. Sulygin, “UPGRADE OF FEEDBACK LOOPS IN ACCELERATING CAVITIES OF THE U70”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WEAPH05, pp. XX-XX.
Back to search