Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Xiang et al., “Dark Current Measurements at the Rossendorf SRF Gun”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO92, pp. 455-457.
[n] R. E. Williamson, D. J. Adams, and C. M. Warsop, “High Intensity Longitudinal Dynamics Studies for Higher Energy Injection into the ISIS Synchrotron”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS019, pp. 640-642.
[n] A. Marocchino, “Plasma Wakefield Start to End Acceleration Simulations From Photocathode to FEL With Simulated Density Profiles”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 154-159. doi:10.18429/JACoW-ICAP2018-MOPAG01
[n] J. Tamura, Y. Kondo, T. Morishita, F. Naito, Y. Nemoto, and M. Otani, “VSWR Adjustment for ACS Cavity in J-PARC LINAC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 974-976. doi:10.18429/JACoW-IPAC2019-MOPTS050
[n] M. P. Crouch et al., “Dynamic Aperture Studies of the Long-Range Beam-Beam Interaction at the LHC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3840-3843. doi:10.18429/JACoW-IPAC2017-THPAB056
[n] J. Sekutowicz et al., “Cavities for JLAB's 12 GeV Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB085, pp. 1395-1397.
[n] G. V. Lamanna, A. Lombardi, and A. Pisent, “Test of a Radio-Frequency Quadrupole Cold Model”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA60, pp. 3522-3524.
[n] C. J. Gardner, Y. Y. Lee, N. Tsoupas, and J. Wei, “An Alternative Lattice for the Spallation Neutron Source Accumulator Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP97, pp. 3182-3184.
[n] A. Jalal, S. Gabourin, M. Gasior, and B. Todd, “First Experiences of Beam Presence Detection Based on Dedicated Beam Position Monitors”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU012, pp. 1081-1083.
[n] A. Neumann et al., “Final Design for the BERLinPro Main Linac Cavity”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP070, pp. 217-220.
[n] F. Curbis et al., “The Test-FEL at MAX-lab: Implementation of the HHG Source and First Results”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEPSO06, pp. 507-509.
[n] S. Gourlay and G. L. Sabbi, “Future Expectations, Limits and Operational Issues for High Field Superconducting Accelerator Dipole Magnets”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE001, pp. 2397-2399.
[n] D. Hui, M. Borland, J. M. Byrd, and Y. Sun, “Jitter Study for the APS Linac Photo-injector Beam”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 647-651. doi:10.18429/JACoW-LINAC2018-TH1A05
[n] S. Buhler, A. Caruette, M. Fouaidy, and T. Junquera, “Activities on Cryostats and SRF Cavities at the IPN ORSAY Laboratory”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I42, pp. XX-XX.
[n] S. Y. Lee, S. Tepikian, and X. F. Zhao, “A Study of the Coupling Resonances in the AGS Booster”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 770-773.
[n] W. Waldron, S. Eylon, W. Greenway, E. Henestroza, and S. S. Yu, “Electrical Breakdown Studies with Mycalex Insulators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE040, pp. 1171-1173.
[n] C. D. Johnson, S. Maury, T. R. Sherwood, and A. H. Sullivan, “Injection into the New CERN Antiproton Collector Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3000-3003.
[n] W. J. Schneider, P. Kneisel, and C. H. Rode, “Gradient Optimization for SC CW Accelerators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB063, pp. 2863-2865.
[n] M. Apollonio, A. P. Blondel, and D. J. Kelliher, “Muon Polarimeter in a Neutrino Factory Decay Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE053, pp. 3464-3466.
[n] S. Chen, J. K. Hao, L. Lin, K. X. Liu, and S. W. Quan, “Flux Pinning Study of OTIC Niobium Material”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 797-801. doi:10.18429/JACoW-SRF2017-THPB028
[n] J. Harray, C. Garion, and V. Petit, “Thermo-Mechanical Modeling and Thermal Performance Analysis of Beam Vacuum Line Interconnections and Cold Warm Transitions in HL-LHC Long Straight Section Magnets”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2839-2842. doi:10.18429/JACoW-IPAC2022-THPOTK035
[n] L. Martin, D. J. Kelliher, and S. L. Sheehy, “Can a Paul Ion Trap Be Used to Investigate Nonlinear Quasi-Integrable Optics?”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3251-3254. doi:10.18429/JACoW-IPAC2019-WEPTS056
[n] D. C. Plostinar, C. R. Prior, G. H. Rees, A. P. Letchford, and A. W. Mitchell, “Modelling the ISIS 70 MeV Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP052, pp. 3859-3861.
[n] A. N. Matveenko and N. Vinokurov, “Normal-Conducting Energy Recuperator”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TH3002, pp. 554-558.
[n] S. Grawunder et al., “Tracking of RRR Value and Microstructure in High Purity Niobium along the Production Chain from the Ingot to the Finished Cavity”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB072, pp. 435-437.
[n] D. E. Anderson et al., “Design of a 1-MV Induction Injector for the Relativisitic Two-Beam Accelerator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W012, pp. 590-592.
[n] A. Opanasenko, G. Shamuilov, K. Pepitone, Z. Tibai, and V. Goryashko, “Emittance oscillations and self-compensation during blow-out beam generation”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL186, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Xiang et al., “Dark Current Measurements at the Rossendorf SRF Gun”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO92, pp. 455-457.
- R. E. Williamson, D. J. Adams, and C. M. Warsop, “High Intensity Longitudinal Dynamics Studies for Higher Energy Injection into the ISIS Synchrotron”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS019, pp. 640-642.
- A. Marocchino, “Plasma Wakefield Start to End Acceleration Simulations From Photocathode to FEL With Simulated Density Profiles”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 154-159.
- J. Tamura, Y. Kondo, T. Morishita, F. Naito, Y. Nemoto, and M. Otani, “VSWR Adjustment for ACS Cavity in J-PARC LINAC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 974-976.
- M. P. Crouch et al., “Dynamic Aperture Studies of the Long-Range Beam-Beam Interaction at the LHC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3840-3843.
- J. Sekutowicz et al., “Cavities for JLAB's 12 GeV Upgrade”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB085, pp. 1395-1397.
- G. V. Lamanna, A. Lombardi, and A. Pisent, “Test of a Radio-Frequency Quadrupole Cold Model”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA60, pp. 3522-3524.
- C. J. Gardner, Y. Y. Lee, N. Tsoupas, and J. Wei, “An Alternative Lattice for the Spallation Neutron Source Accumulator Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP97, pp. 3182-3184.
- A. Jalal, S. Gabourin, M. Gasior, and B. Todd, “First Experiences of Beam Presence Detection Based on Dedicated Beam Position Monitors”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU012, pp. 1081-1083.
- A. Neumann et al., “Final Design for the BERLinPro Main Linac Cavity”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP070, pp. 217-220.
- F. Curbis et al., “The Test-FEL at MAX-lab: Implementation of the HHG Source and First Results”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper WEPSO06, pp. 507-509.
- S. Gourlay and G. L. Sabbi, “Future Expectations, Limits and Operational Issues for High Field Superconducting Accelerator Dipole Magnets”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE001, pp. 2397-2399.
- D. Hui, M. Borland, J. M. Byrd, and Y. Sun, “Jitter Study for the APS Linac Photo-injector Beam”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 647-651.
- S. Buhler, A. Caruette, M. Fouaidy, and T. Junquera, “Activities on Cryostats and SRF Cavities at the IPN ORSAY Laboratory”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I42, pp. XX-XX.
- S. Y. Lee, S. Tepikian, and X. F. Zhao, “A Study of the Coupling Resonances in the AGS Booster”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 770-773.
- W. Waldron, S. Eylon, W. Greenway, E. Henestroza, and S. S. Yu, “Electrical Breakdown Studies with Mycalex Insulators”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE040, pp. 1171-1173.
- C. D. Johnson, S. Maury, T. R. Sherwood, and A. H. Sullivan, “Injection into the New CERN Antiproton Collector Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3000-3003.
- W. J. Schneider, P. Kneisel, and C. H. Rode, “Gradient Optimization for SC CW Accelerators”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB063, pp. 2863-2865.
- M. Apollonio, A. P. Blondel, and D. J. Kelliher, “Muon Polarimeter in a Neutrino Factory Decay Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE053, pp. 3464-3466.
- S. Chen, J. K. Hao, L. Lin, K. X. Liu, and S. W. Quan, “Flux Pinning Study of OTIC Niobium Material”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 797-801.
- J. Harray, C. Garion, and V. Petit, “Thermo-Mechanical Modeling and Thermal Performance Analysis of Beam Vacuum Line Interconnections and Cold Warm Transitions in HL-LHC Long Straight Section Magnets”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2839-2842.
- L. Martin, D. J. Kelliher, and S. L. Sheehy, “Can a Paul Ion Trap Be Used to Investigate Nonlinear Quasi-Integrable Optics?”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3251-3254.
- D. C. Plostinar, C. R. Prior, G. H. Rees, A. P. Letchford, and A. W. Mitchell, “Modelling the ISIS 70 MeV Linac”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP052, pp. 3859-3861.
- A. N. Matveenko and N. Vinokurov, “Normal-Conducting Energy Recuperator”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TH3002, pp. 554-558.
- S. Grawunder et al., “Tracking of RRR Value and Microstructure in High Purity Niobium along the Production Chain from the Ingot to the Finished Cavity”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB072, pp. 435-437.
- D. E. Anderson et al., “Design of a 1-MV Induction Injector for the Relativisitic Two-Beam Accelerator”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2W012, pp. 590-592.
- A. Opanasenko, G. Shamuilov, K. Pepitone, Z. Tibai, and V. Goryashko, “Emittance oscillations and self-compensation during blow-out beam generation”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL186, unpublished.
Back to search