Warning
Some papers have malformed authors, please correct this before using these references.
Favourites
For Word
[n] M. P. Bourgarel, L. Bex, P. Di Bernardo, and E. Plawski, “GANIL Axial Injection Design with an ECR Ion Source”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B40, pp. 161-164.
[n] S. V. Kuzikov, J. L. Hirshfield, S. Kazakov, and M. E. Plotkin, “High-gradient Multi-mode Two-beam Accelerating Structure”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP133, pp. 2806-2808.
[n] F. M. Velotti et al., “Feasibility Studies for the Extraction of both LHC Beams from CERN SPS using a Common Kicker”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 842-844. doi:10.18429/JACoW-IPAC2014-MOPRI097
[n] D. Kang et al., “Characterization of Large Grain Nb Ingot Microstructure Using OIM and Laue Methods”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO067, pp. 890-897.
[n] Hui Zhongxi, “FEL Studies in China”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 121-125.
[n] R. Losito, M. R. Masullo, F. Galluccio, G. Di Massa, M. Cardito, and V. Vacarro, “Transverse Beam Impedance Measurement: A New Coaxial Method”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2154-2157.
[n] K. S. White, K.-U. Kasemir, K. L. Mahoney, K. Vodopivec, and D. C. Williams, “Modernizing the SNS Control System”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 21-25. doi:10.18429/JACoW-ICALEPCS2021-MOAR01
[n] H. Klein et al., “Properties of a 0-Mode RFQ Structure and Recent Experimental Results”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper C03, pp. 96-98.
[n] H. J. Kwon, H. S. Kim, K. H. Chung, K. O. Lee, and S. J. Noh, “Parametric Study on The Improvement of The Beam Energy Gain of The Fantron-I Cavity”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH477, pp. 776-778.
[n] G. Waters, M. J. Barnes, D. Bishop, and G. D. Wait, “Controls and Interlocks for a Prototype 1 MHz Beam Chopper”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1531-1534.
[n] O. Despe and J. Wang, “Design of a Gate-Turn-Off GTO Switch for Pulsed Power Application”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02F, pp. 2281-2283.
[n] S. P. Jachim, “A High-Speed Voltage-Controlled Oscillator for the Fermilab Booster Low-Level RF System”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3953-3956.
[n] R. M. Caliari et al., “Studies on Flow-Induced Vibrations for the New High-Dynamics DCM for Sirius”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 8-11. doi:10.18429/JACoW-MEDSI2016-MOPE02
[n] J. R. J. Bennett, A. Carne, M. R. Harold, J. R. M. Maidment, G. H. Rees, and A. G. Wheldon, “LEP Injection”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1880-1882.
[n] J. Seeman et al., “Performance of the PEP-II B-Factory Collider at SLAC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP035, pp. 2369-2371.
[n] G. V. Claudiano, O. R. Bagnato, P. T. Fonseca, F. R. Francisco, R. L. Parise, and L. M. Volpe, “Glidcop Brazing in Sirius' High Heat Load Front-End Components”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 216-219. doi:10.18429/JACoW-MEDSI2016-TUPE23
[n] P. Tracz et al., “RF and synchronization system for VEGA project”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM101, unpublished.
[n] V. Wu, A. Z. Chen, Z. Qian, and D. Wildman, “Design of a New Main Injector Cavity for the Fermilab Proton Driver Era”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT028, pp. 2015-2017.
[n] U. Pudasaini, M. J. Kelley, G. V. Eremeev, C. E. Reece, and H. Tian, “Electrochemical Finishing Treatment of Nb3Sn Diffusion-coated Niobium”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 900-905. doi:10.18429/JACoW-SRF2017-THPB070
[n] T. Limberg et al., “Velocity Bunching at FLASH”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC019, pp. 112-114.
[n] D. T. Palmer, X. J. Wang, I. Ben-Zvi, and R. H. Miller, “Beam Dynamics Enhancement Due to Accelerating Field Symmetrization in the BNL/SLAC/UCLA 1.6 Cell S-Band Photocathode RF Gun”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W011, pp. 2846-2848.
[n] G. Hochweller and H. Frese, “Tools for Man Machine Communication in the PETRA Control System”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3382-3385.
[n] J. Dragt, “Release of MARYLIE 3.0”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA65, pp. 2761-2763.
For LaTeX
Use Complete Form
For BibTeX
References
- M. P. Bourgarel, L. Bex, P. Di Bernardo, and E. Plawski, “GANIL Axial Injection Design with an ECR Ion Source”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B40, pp. 161-164.
- S. V. Kuzikov, J. L. Hirshfield, S. Kazakov, and M. E. Plotkin, “High-gradient Multi-mode Two-beam Accelerating Structure”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP133, pp. 2806-2808.
- F. M. Velotti et al., “Feasibility Studies for the Extraction of both LHC Beams from CERN SPS using a Common Kicker”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 842-844.
- D. Kang et al., “Characterization of Large Grain Nb Ingot Microstructure Using OIM and Laue Methods”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THPO067, pp. 890-897.
- Hui Zhongxi, “FEL Studies in China”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 121-125.
- R. Losito, M. R. Masullo, F. Galluccio, G. Di Massa, M. Cardito, and V. Vacarro, “Transverse Beam Impedance Measurement: A New Coaxial Method”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2154-2157.
- K. S. White, K.-U. Kasemir, K. L. Mahoney, K. Vodopivec, and D. C. Williams, “Modernizing the SNS Control System”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 21-25.
- H. Klein et al., “Properties of a 0-Mode RFQ Structure and Recent Experimental Results”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper C03, pp. 96-98.
- H. J. Kwon, H. S. Kim, K. H. Chung, K. O. Lee, and S. J. Noh, “Parametric Study on The Improvement of The Beam Energy Gain of The Fantron-I Cavity”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH477, pp. 776-778.
- G. Waters, M. J. Barnes, D. Bishop, and G. D. Wait, “Controls and Interlocks for a Prototype 1 MHz Beam Chopper”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1531-1534.
- O. Despe and J. Wang, “Design of a Gate-Turn-Off GTO Switch for Pulsed Power Application”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP02F, pp. 2281-2283.
- S. P. Jachim, “A High-Speed Voltage-Controlled Oscillator for the Fermilab Booster Low-Level RF System”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3953-3956.
- R. M. Caliari et al., “Studies on Flow-Induced Vibrations for the New High-Dynamics DCM for Sirius”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 8-11.
- J. R. J. Bennett, A. Carne, M. R. Harold, J. R. M. Maidment, G. H. Rees, and A. G. Wheldon, “LEP Injection”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1880-1882.
- J. Seeman et al., “Performance of the PEP-II B-Factory Collider at SLAC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP035, pp. 2369-2371.
- G. V. Claudiano, O. R. Bagnato, P. T. Fonseca, F. R. Francisco, R. L. Parise, and L. M. Volpe, “Glidcop Brazing in Sirius' High Heat Load Front-End Components”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 216-219.
- P. Tracz et al., “RF and synchronization system for VEGA project”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM101, this conference.
- V. Wu, A. Z. Chen, Z. Qian, and D. Wildman, “Design of a New Main Injector Cavity for the Fermilab Proton Driver Era”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT028, pp. 2015-2017.
- U. Pudasaini, M. J. Kelley, G. V. Eremeev, C. E. Reece, and H. Tian, “Electrochemical Finishing Treatment of Nb3Sn Diffusion-coated Niobium”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 900-905.
- T. Limberg et al., “Velocity Bunching at FLASH”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC019, pp. 112-114.
- D. T. Palmer, X. J. Wang, I. Ben-Zvi, and R. H. Miller, “Beam Dynamics Enhancement Due to Accelerating Field Symmetrization in the BNL/SLAC/UCLA 1.6 Cell S-Band Photocathode RF Gun”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4W011, pp. 2846-2848.
- G. Hochweller and H. Frese, “Tools for Man Machine Communication in the PETRA Control System”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3382-3385.
- J. Dragt, “Release of MARYLIE 3.0”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA65, pp. 2761-2763.
Back to search