Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. C. Chae and G. Decker, “Advanced Photon Source Insertion Device Field Quality and Multipole Error Specification”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAR24, pp. 3409-3411.
[n] F. Farley, “Advanced European Medical Facilities”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 417-422.
[n] K. M. Schirm, E. Chiaveri, B. Thony, and W. Weingarten, “Analysis of the Coating Success Rate in the Series Production of Nb/Cu Superconducting RF Cavities for LEP2”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C19, pp. 461-465.
[n] F. Kircher and M. Leininger, “Construction of Energy Doubler Correction Magnets”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3931-3934.
[n] M. Calvi et al., “General Strategy for the Commissioning of the ARAMIS Undulators with a 3 GeV Electron Beam”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP040, pp. 107-110.
[n] D. Haas et al., “Status of the Ultra Fast Tomography Experiments Control at ANKA”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THCA06, pp. 103-105.
[n] J. Billan, J. P. Gourber, and K. N. Henrichsen, “Determination of the Particle Momentum in LEP from Precise Magnet Measurements”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2122-2125.
[n] A. Almomani, M. Droba, I. Hofmann, and U. Ratzinger, “Matching the Laser Generated p - bunch into a CH-DTL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD035, pp. 4355-4357.
[n] H. C. Liu et al., “CSNS DTL Prototyping and RF Tuning”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB103, pp. 702-704.
[n] A. Laisne, “The Realisation of the Magnetic Circuit of the AGOR Cyclotron”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1172-1175.
[n] L. Yu, Y. F. Sui, L. Wang, and D. C. Zhu, “Fiber-based Cherenkov Beam Loss and Beam Profile Monitor at BEPC II”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2622-2624. doi:10.18429/JACoW-IPAC2019-WEPGW063
[n] M. Plesko and G. Tkacik, “A Reflection on Introspection”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP540, pp. XX-XX.
[n] C. Ekstroem, “The WASA Facility at the CELSIUS Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP06E, pp. 2447-2449.
[n] H. Nesemann and B. Sarau, “Present Limits for the Luminosity, the Beam Current and the Beam Lifetime in DORIS II”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1644-1647.
[n] B. S. Martins, “Benefits and Drawbacks of Using Rust in an Existing C/C++ Codebase”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 930. doi:10.18429/JACoW-ICALEPCS2019-WECPR02
[n] C. D. Jonah and R. A. Crowell, “The Design of an Accelerator for Advanced Pulse Radiolysis Experiments”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH2002, pp. 742-744.
[n] L. R. Doolittle and D. X. Wang, “RF Control Studies for Moderate Beamline Coupling Between SRF Cavities”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4066, pp. 549-551.
[n] N. Brown, “Dielectric Response of Particle Beams to Periodic Focusing”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP71, pp. 839-841.
[n] W. F. Henning, “FAIR - An International Accelerator Facility for Research with Ions and Antiprotons”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUXCH02, pp. 50-53.
[n] S. Kwon, J. Davis, M. T. Lynch, M. S. Prokop, S. Ruggles, and P. A. Torrez, “Gain Scheduled Neural Network Tuned PI Feedback Control System for the LANSCE Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS022, pp. 2379-2381.
[n] S. Seletskiy et al., “Precise Beam Velocity Matching for the Experimental Demonstration of Ion Cooling With a Bunched Electron Beam”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 356-359. doi:10.18429/JACoW-NAPAC2019-TUZBB3
[n] K. V. Nagesh, “Theoretical Analysis of the Recovery Times in Low Pressure Sparkgaps - Positive Ion Diffusion Method”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA065, pp. 723-725.
[n] L. T. Campbell et al., “HPC Simulation Suite for Future FELs”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 384-387. doi:10.18429/JACoW-FEL2015-TUP017
[n] J. Kewisch, V. Ptitsin, J. Rose, and J. Wei, “RHIC Longitudinal Parameter Revision”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP12C, pp. 377-379.
[n] F. Selph and D. Massoletti, “Operating Experience with the ALS Linac”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2978-2981.
[n] M. A. Chaudhri, “Yields of Cyclotron Produced Medical Isotopes: A Comparison of Theoretical Potential and Experimental Results”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper E-16, pp. 2281-2286.
[n] E. Y. Wildner, F. Borgnolutti, F. Cerutti, M. Mauri, A. Mereghetti, and E. Todesco, “Parametric Study of Energy Deposition in the LHC Inner Triplet for the Phase 1 Upgrade”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP032, pp. 2590-2592.
[n] J.-M. Dolique and M. Coacolo, “Transverse Emittance of an Intense Electron Short Pulse Just Emitted by the Cathode of a RF-FEL Photoinjector: Influence of Electrodynamic Effects”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 236-239.
[n] P. H. Owens, “A Control System Upgrade for the Daresbury MEIS Facility”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP017, pp. XX-XX.
[n] R. J. Jones, “Recent Progress on the ORNL Mc2 Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63G03, pp. XX-XX.
[n] M. C. Lin and K. L. Tsang, “On the Thermal Deformation Analyses of CVD Silicon-Carbide Mirror”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP37C, pp. 2318-2320.
[n] J. M. J. Madey, W. M. Fairbank, and H. A. Schwettman, “A Free Electron Laser”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 980-984.
[n] D. X. Wang, “Experimental Studies of Longitudinal Dynamics of Space-Charge Dominated Electron Beams”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MXG02, pp. 48-52.
[n] H. Owen, “Beam Lifetime at the SRS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W004, pp. 333-335.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. C. Chae and G. Decker, “Advanced Photon Source Insertion Device Field Quality and Multipole Error Specification”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAR24, pp. 3409-3411.
- F. Farley, “Advanced European Medical Facilities”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 417-422.
- K. M. Schirm, E. Chiaveri, B. Thony, and W. Weingarten, “Analysis of the Coating Success Rate in the Series Production of Nb/Cu Superconducting RF Cavities for LEP2”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95C19, pp. 461-465.
- F. Kircher and M. Leininger, “Construction of Energy Doubler Correction Magnets”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3931-3934.
- M. Calvi et al., “General Strategy for the Commissioning of the ARAMIS Undulators with a 3 GeV Electron Beam”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP040, pp. 107-110.
- D. Haas et al., “Status of the Ultra Fast Tomography Experiments Control at ANKA”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THCA06, pp. 103-105.
- J. Billan, J. P. Gourber, and K. N. Henrichsen, “Determination of the Particle Momentum in LEP from Precise Magnet Measurements”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2122-2125.
- A. Almomani, M. Droba, I. Hofmann, and U. Ratzinger, “Matching the Laser Generated p - bunch into a CH-DTL”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD035, pp. 4355-4357.
- H. C. Liu et al., “CSNS DTL Prototyping and RF Tuning”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB103, pp. 702-704.
- A. Laisne, “The Realisation of the Magnetic Circuit of the AGOR Cyclotron”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1172-1175.
- L. Yu, Y. F. Sui, L. Wang, and D. C. Zhu, “Fiber-based Cherenkov Beam Loss and Beam Profile Monitor at BEPC II”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2622-2624.
- M. Plesko and G. Tkacik, “A Reflection on Introspection”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP540, pp. XX-XX.
- C. Ekstroem, “The WASA Facility at the CELSIUS Storage Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP06E, pp. 2447-2449.
- H. Nesemann and B. Sarau, “Present Limits for the Luminosity, the Beam Current and the Beam Lifetime in DORIS II”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1644-1647.
- B. S. Martins, “Benefits and Drawbacks of Using Rust in an Existing C/C++ Codebase”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 930.
- C. D. Jonah and R. A. Crowell, “The Design of an Accelerator for Advanced Pulse Radiolysis Experiments”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH2002, pp. 742-744.
- L. R. Doolittle and D. X. Wang, “RF Control Studies for Moderate Beamline Coupling Between SRF Cavities”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4066, pp. 549-551.
- N. Brown, “Dielectric Response of Particle Beams to Periodic Focusing”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP71, pp. 839-841.
- W. F. Henning, “FAIR - An International Accelerator Facility for Research with Ions and Antiprotons”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUXCH02, pp. 50-53.
- S. Kwon, J. Davis, M. T. Lynch, M. S. Prokop, S. Ruggles, and P. A. Torrez, “Gain Scheduled Neural Network Tuned PI Feedback Control System for the LANSCE Accelerator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS022, pp. 2379-2381.
- S. Seletskiy et al., “Precise Beam Velocity Matching for the Experimental Demonstration of Ion Cooling With a Bunched Electron Beam”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 356-359.
- K. V. Nagesh, “Theoretical Analysis of the Recovery Times in Low Pressure Sparkgaps - Positive Ion Diffusion Method”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA065, pp. 723-725.
- L. T. Campbell et al., “HPC Simulation Suite for Future FELs”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 384-387.
- J. Kewisch, V. Ptitsin, J. Rose, and J. Wei, “RHIC Longitudinal Parameter Revision”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP12C, pp. 377-379.
- F. Selph and D. Massoletti, “Operating Experience with the ALS Linac”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2978-2981.
- M. A. Chaudhri, “Yields of Cyclotron Produced Medical Isotopes: A Comparison of Theoretical Potential and Experimental Results”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper E-16, pp. 2281-2286.
- E. Y. Wildner, F. Borgnolutti, F. Cerutti, M. Mauri, A. Mereghetti, and E. Todesco, “Parametric Study of Energy Deposition in the LHC Inner Triplet for the Phase 1 Upgrade”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP032, pp. 2590-2592.
- J.-M. Dolique and M. Coacolo, “Transverse Emittance of an Intense Electron Short Pulse Just Emitted by the Cathode of a RF-FEL Photoinjector: Influence of Electrodynamic Effects”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 236-239.
- P. H. Owens, “A Control System Upgrade for the Daresbury MEIS Facility”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP017, pp. XX-XX.
- R. J. Jones, “Recent Progress on the ORNL Mc2 Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63G03, pp. XX-XX.
- M. C. Lin and K. L. Tsang, “On the Thermal Deformation Analyses of CVD Silicon-Carbide Mirror”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP37C, pp. 2318-2320.
- J. M. J. Madey, W. M. Fairbank, and H. A. Schwettman, “A Free Electron Laser”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 980-984.
- D. X. Wang, “Experimental Studies of Longitudinal Dynamics of Space-Charge Dominated Electron Beams”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MXG02, pp. 48-52.
- H. Owen, “Beam Lifetime at the SRS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7W004, pp. 333-335.
Back to search