Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. W. Davis, W. L. Dexter, and B. H. Smith, “Application of Telephone Crossbar Relays to Computer Control of a Particle Accelerator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 894-898.
[n] B. S. K. Srivastava, R. K. Agrawal, K. G. Barpande, P. Fatnani, and C. P. Navathe, “FLogbook: From Concept to Realization”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD06, pp. 148-150.
[n] S. C. Joshi et al., “Prototype Engineering Design of 350 MHz 4.5 MeV RFQ for Proposed Proton Linac for Indian ADS Program”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH470, pp. 758-760.
[n] A. D. Ghodke and D. Angal-Kalinin and G Singh, “KICKER CHAMBER METALLIZATION INDUCED EFFECTS ON THE BEAM IN INDUS-1”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THCM04, pp. XX-XX.
[n] N. Iida, T. Mimashi, S. Naitoh, H. Nakayama, K. Satoh, and A. Tokuchi, “Abort Systems for the KEKB”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1A09, pp. 2423-2425.
[n] O. Gr, “Beam Induced Multipacting”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P004, pp. 3589-3591.
[n] H. Enquist et al., “Continuous Scans with Position Based Hardware Triggers”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 1069-1073. doi:10.18429/JACoW-ICALEPCS2021-FRBR04
[n] J. Sage, M. H. Bickley, and K. S. White, “Using a Nameserver to Enhance Control System Efficiency”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP074, pp. XX-XX.
[n] K. Hirosawa et al., “Measurements of Momentum Halo Due to the Reduced RFQ Voltage During the LIPAc Beam Commissioning”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 112-117. doi:10.18429/JACoW-HB2023-TUA3I2
[n] Y. Shoji, T. Asaka, Y. Hisaoka, T. Matsubara, T. Mitsui, and S. Suzuki, “Circulation of a Short, Intense Electron Bunch in the NewSUBARU Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH055, pp. 163-165.
[n] A. S. Raja Rao, “STATUS OF SRS INDUS-2”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper MOD01, pp. XX-XX.
[n] J. Haimson and B. L. Mecklenburg, “A 17 GHz High Gradient Linac having Stainless Steel Surfaces in the High Intensity Magnetic and Electric Field Regions of the Structure”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS085, pp. 2532-2534.
[n] J. Bardy et al., “First Operation of the LELIA Induction Accelerator at CESTA”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 670-673.
[n] K. Chen, S. Wang, G. Wang, and W. Xu, “Beam Based Alignment Using a Neural Network”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPM066, unpublished.
[n] Y. Shoji, S. H. Hisao, and T. Matsubara, “Quasi-isochronus Operation at NewSUBARU”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF037, pp. 2356-2358.
[n] T. Allison, J. Sage, M. Wissman, V. A. Lebedev, and C. Piller, “The CEBAF Beam Scraping Monitor”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH130, pp. 2389-2391.
[n] M. Kanazawa et al., “Acceleration of Multiple-Charged Ions at HIMAC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP49C, pp. 535-537.
[n] M. R. Shubaly, R. W. Hamm, and R. A. Judd, “Beam, An Improved Beam Extraction and Acceleration Modeling Code”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2655-2658.
[n] J. D. Hepburn and W. L. Michel, “A Microprocessor-Controlled Bead Puller for RF Cavity Measurements”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B08, pp. 56-58.
[n] A. Kling and K. Balewski, “Frequency Maps at PETRA III”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA016, pp. 2511-2513.
[n] R. Giannini and P. Mandrillon, “On the Possibility of Accelerating Multiply Charged Ions in the CERN Synchro-Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper I-07, pp. 609-613.
[n] J. Haimson, “Optimization Criteria for Standing Wave Transverse Magnetic Deflection Cavities”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper VI-06, pp. 303-331.
[n] K. Chen, M. Hosaka, and W. Xu, “Preliminary design for the JHLS storage ring”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPC36, unpublished.
[n] O. Gr, “The LHC Vacuum System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8C001, pp. 3542-3546.
For LaTeX
Use Complete Form
For BibTeX
References
- J. W. Davis, W. L. Dexter, and B. H. Smith, “Application of Telephone Crossbar Relays to Computer Control of a Particle Accelerator”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 894-898.
- B. S. K. Srivastava, R. K. Agrawal, K. G. Barpande, P. Fatnani, and C. P. Navathe, “FLogbook: From Concept to Realization”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THPD06, pp. 148-150.
- S. C. Joshi et al., “Prototype Engineering Design of 350 MHz 4.5 MeV RFQ for Proposed Proton Linac for Indian ADS Program”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH470, pp. 758-760.
- A. D. Ghodke and D. Angal-Kalinin and G Singh, “KICKER CHAMBER METALLIZATION INDUCED EFFECTS ON THE BEAM IN INDUS-1”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper THCM04, pp. XX-XX.
- N. Iida, T. Mimashi, S. Naitoh, H. Nakayama, K. Satoh, and A. Tokuchi, “Abort Systems for the KEKB”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1A09, pp. 2423-2425.
- O. Gr, “Beam Induced Multipacting”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P004, pp. 3589-3591.
- H. Enquist et al., “Continuous Scans with Position Based Hardware Triggers”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 1069-1073.
- J. Sage, M. H. Bickley, and K. S. White, “Using a Nameserver to Enhance Control System Efficiency”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP074, pp. XX-XX.
- K. Hirosawa et al., “Measurements of Momentum Halo Due to the Reduced RFQ Voltage During the LIPAc Beam Commissioning”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper TUA3I2, pp. 112-117.
- Y. Shoji, T. Asaka, Y. Hisaoka, T. Matsubara, T. Mitsui, and S. Suzuki, “Circulation of a Short, Intense Electron Bunch in the NewSUBARU Storage Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH055, pp. 163-165.
- A. S. Raja Rao, “STATUS OF SRS INDUS-2”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper MOD01, pp. XX-XX.
- J. Haimson and B. L. Mecklenburg, “A 17 GHz High Gradient Linac having Stainless Steel Surfaces in the High Intensity Magnetic and Electric Field Regions of the Structure”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS085, pp. 2532-2534.
- J. Bardy et al., “First Operation of the LELIA Induction Accelerator at CESTA”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 670-673.
- K. Chen, S. Wang, G. Wang, and W. Xu, “Beam Based Alignment Using a Neural Network”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM066, unpublished.
- Y. Shoji, S. H. Hisao, and T. Matsubara, “Quasi-isochronus Operation at NewSUBARU”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF037, pp. 2356-2358.
- T. Allison, J. Sage, M. Wissman, V. A. Lebedev, and C. Piller, “The CEBAF Beam Scraping Monitor”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH130, pp. 2389-2391.
- M. Kanazawa et al., “Acceleration of Multiple-Charged Ions at HIMAC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP49C, pp. 535-537.
- M. R. Shubaly, R. W. Hamm, and R. A. Judd, “Beam, An Improved Beam Extraction and Acceleration Modeling Code”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2655-2658.
- J. D. Hepburn and W. L. Michel, “A Microprocessor-Controlled Bead Puller for RF Cavity Measurements”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B08, pp. 56-58.
- A. Kling and K. Balewski, “Frequency Maps at PETRA III”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA016, pp. 2511-2513.
- R. Giannini and P. Mandrillon, “On the Possibility of Accelerating Multiply Charged Ions in the CERN Synchro-Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper I-07, pp. 609-613.
- J. Haimson, “Optimization Criteria for Standing Wave Transverse Magnetic Deflection Cavities”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper VI-06, pp. 303-331.
- K. Chen, M. Hosaka, and W. Xu, “Preliminary design for the JHLS storage ring”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC36, unpublished.
- O. Gr, “The LHC Vacuum System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8C001, pp. 3542-3546.
Back to search