Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] L. Philippe, P. Gillette, and G. Normand, “User Interfaces for the Spiral2 Machine Protection System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC102, pp. 818-821.
[n] S. Kozub et al., “Development and Production of Superconducting and Cryogenic Equipment and Systems for Accelerators by IHEP”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THCHC01, pp. 295-299.
[n] A. Jejcic, M. Auguin, F. Boeri, J. Maillard, J. Silva, and A. Vincent-Carrefour, “Accelerator Simulation on a Parallel Computer”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1178-1181.
[n] M. S. Bakeman, W. Leemans, K. Nakamura, K. E. Robinson, C. B. Schroeder, and C. T??th, “Undulator-Based Laser Wakefield Accelerator Electron Beam Diagnostic”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP074, pp. 2967-2969.
[n] D. J. Liska, J. H. Billen, H. Mignardot, and G. W. Zimmerman, “A Rotary Tuner for UHF Drift-Tube Linacs”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 607-609.
[n] B. Groussin, M. Martinez Calderon, E. Granados, B. Marsh, and R. Rossel, “Copper surface treatment with deep UV ultrafast laser for improved photocathode photoemissive properties”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1350-1353. doi:10.18429/JACoW-IPAC2023-TUPA001
[n] E. Barr, S. Peggs, and C. Saltmarsh, “Relational Databases for SSC Design and Control”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1666-1669.
[n] B. Feinberg, G. Behrsing, K. Halbach, J. Marks, M. Morrison, and D. Nelson, “Laced Permanent Magnet Quadrupole Drift Tube Magnets”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-04, pp. 312-314.
[n] S. Joly et al., “A High-Brightness Photo-Injector for a Free Electron Laser Proposal”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 257-260.
[n] W. K. van Asselt, L. A. Ahrens, P. R. Cameron, S. Mandell, G. A. Smith, and W. Zhang, “The Tune Meter Systems at the AGS Complex”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1273-1276.
[n] R. A. Beth, “Complex Methods for Three-Dimensional Magnetic Fields”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 901-904.
[n] R. Palmer and J. S. Berg, “A Model for Determining Dipole, Quadrupole and Combined Function Magnet Costs”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF086, pp. 1807-1809.
[n] S. Petitdemange et al., “LIMA: Library for IMage Acquisition a Worldwide Project for 2D Detector Control”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 886-890. doi:10.18429/JACoW-ICALEPCS2017-TUPHA194
[n] Y. Wang, K. J. Morris, V. P. Suller, and S. Wang, “Progress in Raising the Energy of the CAMD Linac to 300 MeV”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC095, pp. 2216-2218.
[n] J. L. Martins, S. Fonseca, C. Joshi, S. F. Martins, W. B. Mori, and L. O. Silva, “Emission of Collimated X-Ray Radiation in Laser-Wakefield Experiments Using Particle Tracking in PIC Simulations”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP071, pp. 2958-2960.
[n] B. Rusnak et al., “Radio Frequency Superconducting Structures Development Laboratory Capability at Loa Alamos National Laboratory”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO418, pp. 91-92.
[n] K. N. Sjobak, E. Adli, and A. Grudiev, “Surface Field Optimization of Accelerating Structures for CLIC using ACE3P on Remote Computing Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO011, pp. 909-911.
[n] A. Furman, “Hourglass Effects for Asymmetric Colliders”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 422-425.
[n] W. Müller and W. Wolff, “On the Design of the Magnetic Field for a 450 MeV Proton Machine”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63H05, pp. XX-XX.
[n] K. Chida, K. Noda, T. Tanabe, and I. Watanabe, “An Electrostatic Storage Ring for Molecular Science”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3B16, pp. 797-802.
[n] Y. Miyahara, “Computer Simulation of Stabilizing the Radiation Power of Storage Ring Free Electron Laser”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 879-882.
[n] J. W. Xia, Y. Liu, L. J. Mao, R. S. Mao, J. C. Yang, and Y. J. Yuan, “Lanzhou Cooler Storage Ring Commissioning”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THYMH01, pp. 3611-3615.
[n] V. Kamerdzhiev et al., “BPM System Upgrade at COSY”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 303-306. doi:10.18429/JACoW-IBIC2018-TUPC04
[n] F. Gougnaud and P. Mattei, “The First Steps of the Beam Intensity Measurement of the Spiral2 Injector”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP053, pp. 504-506.
[n] M. J. Barnes et al., “Operational Experience of the Upgraded LHC Injection Kicker Magnets”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3623-3626. doi:10.18429/JACoW-IPAC2016-THPMW033
[n] R. A. Baartman, G. Franchetti, and E. M?®tral, “Summary of Group A: Beam Dynamics in High Intensity Circular Machines”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper CPL01, pp. 482-484.
[n] D. J. MacNair, M. A. Kemp, K. J. P. Macken, M. N. Nguyen, and J. J. Olsen, “SLAC P2 MARX Control System and Regulation Scheme”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP196, pp. 1193-1195.
[n] V. H. Hardion, J. Lidon-Simon, M. Lindberg, A. Milan-Otero, A. G. Persson, and D. P. Spruce, “The Internet of Things and Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCB09, pp. 974-977.
[n] T. H. Harutunyan, E. D. Gazazyan, and M. K. Khojoyan, “The Strict Solution of a Radiation Problem in Toroidal Cavity”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS001, pp. 3260-3262.
[n] A. Ballarino, S. A. March, and K. H. Mess, “Commissioning of the LHC Current Leads”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD018, pp. 2446-2448.
[n] Z. R. Wolf, S. D. Anderson, V. Kaplounenko, Yu. I. Levashov, and A. W. Weidemann, “LCLS Undulator System Tuning and Magnetic Measurements”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP088, pp. 336-338.
[n] V. G. Khachatryan, W. Decking, V. V. Sahakyan, A. Tarloyan, and V. M. Tsakanov, “Optimization of the Focusing Lattice for European XFEL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC014, pp. 97-99.
[n] J. Branlard et al., “European XFEL RF Gun Commissioning and LLRF Linac Installation”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2427-2429. doi:10.18429/JACoW-IPAC2014-WEPME065
[n] A. Orlov and E. V. Efremov, “Transient Effects in the Linear Accelerator for Free Electron Laser”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 781-784.
[n] L. M. C. Feliciano et al., “A New Hardware Design for PSB Kicker Magnets (KSW) for the 35 mm Transverse Painting in the Horizontal Plane”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3890-3892. doi:10.18429/JACoW-IPAC2015-THPF086
[n] A. L. Lin and G. Travish, “Use of Monocapillary X-Ray Optics as a Means to Reduce Linewidth and Fluctuations in SASE FELs”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper THOB04, pp. 539-542.
[n] P. Singhai, P. Dhara, A. Roy, and S. Chatterjee, “Digital Pulse Processing Techniques for High Resolution Amplitude Measurement of Radiation Detector”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCC04, pp. 279-281.
[n] P. L. Morton, “Artificial Beam Enlargement”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 862-863.
[n] G. T. Danby, J. W. Jackson, and E. C. Raka, “AGS Lattice Corrections and Tuning Using Backleg Windings”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1007-1009.
[n] S. R. Norum et al., “The Machine Protection System for the Linac Coherent Light Source”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP093, pp. XX-XX.
[n] J. Bobnar, C. K. Allen, S. Peggs, T. A. Pelaia, T. Satogata, and C. G. Trahern, “Applicability of XAL for ESS”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL029, pp. 85-87.
[n] T. Wlostowski, J. Serrano, and F. Vaga, “Developing Distributed Hard-Real Time Software Systems Using FPGAs and Soft Cores”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1073-1078. doi:10.18429/JACoW-ICALEPCS2015-THHA2I01
[n] Y. Valdau, S. Mikirtytchiants, S. Trusov, L. Eltcov, and P. Wuestner, “Development of High Resolution Beam Current Measurement System for COSY-J??lich”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 434-437. doi:10.18429/JACoW-IBIC2016-TUPG41
[n] G. Carcassi and K. Shroff, “Pvmanager: A Java Library for Real-Time Data Processing”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC134, pp. 903-905.
[n] A. O. Hanson, D. Jamnik, C. S. Robinson, and C. L. Rogers, “Plans for a Superconducting CW Electron Linac at the University of Illinois”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper X-02, pp. 494-496.
[n] K. I. Mihailov, E. A. Golubkov, V. Kobets, A. N. Repkin, A. P. Sumbaev, and V. M. Pavlov, “Upgrade of the RF System on the LUE-200”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 256-257. doi:10.18429/JACoW-RUPAC2016-TUPSA019
[n] M. Loiselet, N. Postiau, and G. Ryckewaert, “Status Report of Cyclone”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper I-16, pp. 82-85.
[n] T. Takahashi, M. Izawa, S. Sakanaka, and K. Umemori, “Renewal of Klystron Power Supply for the Photon Factory Storage Ring at KEK”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP087, pp. 1035-1037.
[n] S. J. Full et al., “A Fast Rotating Wire Scanner for use in High Current Accelerators”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOBA1, pp. 385-387.
[n] T. Shimada et al., “Thermal Deformation of Magnetic Alloy Cores for J-PARC RCS RF Cavities”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA019, pp. 3717-3719.
[n] W. B. Herrmannsfeldt, H. A. Hogg, G. A. Loew, and R. B. Neal, “Feasibility Study of a Two-Mile Superconducting Linac”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1004-1009.
[n] B. A. Tatum, D. T. Dowling, R. S. Lord, S. W. Mosko, and D. K. Olsen, “Design, Construction, and Field Mapping of the HISTRAP Prototype Dipole”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 393-396.
[n] W. Le Coz, C. Doutresssoulles, C. Jamet, G. Ledu, S. Loret, and C. Potier de courcy, “Measurement and Control of the Beam Energy for the SPIRAL2 Accelerator”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF32, pp. 897-899.
[n] P. Tallerico et al., “An RF-Driven Lasertron”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-02, pp. 528-530.
[n] X. Escaler, V. Arbo Sang?â, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Thermo-Fluid Numerical Simulation of the Crotch Absorbers' Cooling Pinholes for ALBA Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 165-168. doi:10.18429/JACoW-MEDSI2016-TUPE06
[n] E. Sabia, G. Dattoli, C. R. Frascati, and A. Dipace, “Free Electron Laser Triggered Photo-Cathode”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH032, pp. 641-644.
[n] N. Ouchi et al., “Design and Development Work for a Superconducting Proton Linac at JAERI”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A03, pp. 22-26.
[n] M. Pokorny et al., “Distributed Control System for the Test Interferometer of the ALMA Project”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAT004, pp. XX-XX.
[n] M. S. Champion et al., “Plans for an Integrated Front-End Test Stand at the Spallation Neutron Source”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB044, pp. 954-956.
[n] L. M. Bollinger, “Superconducting Heavy-Ion Linacs”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1076-1081.
[n] B. Rusnak et al., “Status of RF Superconductivity at Los Alamos National Laboratory”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93B05, pp. XX-XX.
[n] Z. Kormány, “A compact device for measuring and monitoring the energy of accelerated particle beams”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 752-755. doi:10.18429/JACoW-IBIC2025-WEPMO16
[n] S. Wang and J. Deng, “Acceleration Module in Linear Induction Accelerator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD073, pp. 4449-4451.
[n] C. Adolphsen et al., “Design, Fabrication and Measurement of the First Rounded Damped Detuned Accelerator Structure (RDDS1)”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUA03, pp. 377-379.
[n] J. J. Kritzinger, A. H. Botha, P. M. Cronje, P. R. de Kock, R. E. F. Fenemore, and M. J. van Niekerk, “Pulse Selection and Rebunching in the NAC Transfer Beamline”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I2-15, pp. 384-387.
[n] B. N. Kosciuk, C. Hetzel, J. A. Kierstead, V. Ravindranath, S. K. Sharma, and O. Singh, “Development and Testing of Carbon Fiber Vacuum Chamber Supports for NSLS-II”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP286, pp. 1364-1366.
[n] J. B. Flanz, “Symmetry Corrected Second Order Achromat”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1349-1352.
[n] J. T. Seeman, M. Browne, P. Emma, T. Himel, K. Jobe, and N. Walker, “Linac Final Focus Feed-Forward for Increasing the SLC Luminosity”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1376-1379.
[n] P. Chu, S. Chevtsov, G. B. Shen, and J. Wu, “Service Oriented Architecture for High Level Applications”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC072, pp. 1886-1888.
[n] Y. Chiba, K. Ohtomo, T. Rizawa, and M. Wakasugi, “Ferrite Evaluation Test for MUSES”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4B13, pp. 1987-1989.
[n] A. Zholents, M. Zolotorev, and W. Wan, “Generation of Attosecond Electron Bunches”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAC004, pp. 723-725.
[n] V. A. Moiseev and P. N. Ostroumov, “Longitudinal Dynamics Simulation of the High Intensity Beam in the MMF Storage Ring”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1714-1717.
[n] T. Shaftan et al., “Microbunching and Beam Break-up in DUV FEL Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOPD005, pp. 329-331.
[n] J. F. DeFord and B. Held, “Periodic Boundary Conditions in the Parallel Eigensolver OM3P: Application of the Inexact Lanczos Process to Hermitian Systems”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAG051, pp. 3554-3556.
[n] M. Ritzert, E. Blanco Vinuela, M. Ostrega, and L. Zwalinski, “UNICOS Framework and EPICS: A Possible Integration”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 915-917. doi:10.18429/JACoW-ICALEPCS2017-TUPHA201
[n] Z. D. Farkas, G. Spalek, and P. B. Wilson, “RF Pulse Compression Experiment at SLAC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 132-135.
[n] J. Etter, K. Jenkins, and D. Nelson, “Computer Control for the Maryland Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 873-875.
[n] R. Perry, “Some Thoughts Related to Cryogenic Linacs”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper B-15, pp. 206-208.
[n] Y. Jongen, M. Abs, S. Zaremba, T. Delvigne, and A. Herer, “Realignment of a Diverging Electron Beam: A New Beam Delivery System for Rhodotrons”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P103, pp. 3857-3859.
[n] V. A. Isaev, N. Claesson, M. Plesko, and K. Zagar, “EPICS Data Acquisition Device Support”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC059, pp. 707-709.
[n] V. G. Dudnikov et al., “Saddle Antenna RF Ion Sources for Efficient Positive and Negative Ions Production”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4060-4062. doi:10.18429/JACoW-IPAC2015-THPF143
[n] R. D. Hay, “The Design of Beam Inflector Magnets for Ultrhigh Vacuum Operation”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 746-750.
[n] D. Martin et al., “Finalized Design of the SSC RFQ-DTL Matching Section”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1703-1706.
[n] S. Matsumoto et al., “High Power Testing Results of the X-Band Mixed-Mode RF Windows for Linear Colliders”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THA02, pp. 736-738.
[n] D. J. Liska and L. B. Dauelsberg, “Performance of the LAMPF Particle Separator”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1577-1580.
[n] N. M. Kroll and K. Ko, “Mode Filter Designfor the NLC Overmoded RF Power Transport System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2010-2013.
[n] L. Maunoury et al., “SPIRAL1 Charge Breeder: Performances and Status”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 35-38. doi:10.18429/JACoW-ECRIS2016-MOFO01
[n] G. H. Mackenzie, M. K. Craddock, G. Dutto, R. E. Laxdal, J. R. Richardson, and M. Zach, “Plans for the Extraction of Intense Beams of H Ions from the TRIUMF Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper E03, pp. 233-236.
[n] I. Rutkowski, L. Butkowski, M. Hoffmann, H. Schlarb, and Ch. Schmidt, “REGAE LLRF Control System Overview”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA031, pp. 3210-3212.
[n] J. P. Dai, B. Ni, J. Y. Zhai, and J. R. Zhang, “Design Study of a Compact Deflecting Cavity at IHEP”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2188-2190. doi:10.18429/JACoW-IPAC2016-WEPMB030
For LaTeX
Use Complete Form
For BibTeX
References
- L. Philippe, P. Gillette, and G. Normand, “User Interfaces for the Spiral2 Machine Protection System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC102, pp. 818-821.
- S. Kozub et al., “Development and Production of Superconducting and Cryogenic Equipment and Systems for Accelerators by IHEP”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THCHC01, pp. 295-299.
- A. Jejcic, M. Auguin, F. Boeri, J. Maillard, J. Silva, and A. Vincent-Carrefour, “Accelerator Simulation on a Parallel Computer”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1178-1181.
- M. S. Bakeman, W. Leemans, K. Nakamura, K. E. Robinson, C. B. Schroeder, and C. T??th, “Undulator-Based Laser Wakefield Accelerator Electron Beam Diagnostic”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP074, pp. 2967-2969.
- D. J. Liska, J. H. Billen, H. Mignardot, and G. W. Zimmerman, “A Rotary Tuner for UHF Drift-Tube Linacs”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 607-609.
- B. Groussin, M. Martinez Calderon, E. Granados, B. Marsh, and R. Rossel, “Copper surface treatment with deep UV ultrafast laser for improved photocathode photoemissive properties”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA001, pp. 1350-1353.
- E. Barr, S. Peggs, and C. Saltmarsh, “Relational Databases for SSC Design and Control”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1666-1669.
- B. Feinberg, G. Behrsing, K. Halbach, J. Marks, M. Morrison, and D. Nelson, “Laced Permanent Magnet Quadrupole Drift Tube Magnets”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-04, pp. 312-314.
- S. Joly et al., “A High-Brightness Photo-Injector for a Free Electron Laser Proposal”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 257-260.
- W. K. van Asselt, L. A. Ahrens, P. R. Cameron, S. Mandell, G. A. Smith, and W. Zhang, “The Tune Meter Systems at the AGS Complex”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1273-1276.
- R. A. Beth, “Complex Methods for Three-Dimensional Magnetic Fields”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 901-904.
- R. Palmer and J. S. Berg, “A Model for Determining Dipole, Quadrupole and Combined Function Magnet Costs”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF086, pp. 1807-1809.
- S. Petitdemange et al., “LIMA: Library for IMage Acquisition a Worldwide Project for 2D Detector Control”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 886-890.
- Y. Wang, K. J. Morris, V. P. Suller, and S. Wang, “Progress in Raising the Energy of the CAMD Linac to 300 MeV”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC095, pp. 2216-2218.
- J. L. Martins, S. Fonseca, C. Joshi, S. F. Martins, W. B. Mori, and L. O. Silva, “Emission of Collimated X-Ray Radiation in Laser-Wakefield Experiments Using Particle Tracking in PIC Simulations”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP071, pp. 2958-2960.
- B. Rusnak et al., “Radio Frequency Superconducting Structures Development Laboratory Capability at Loa Alamos National Laboratory”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO418, pp. 91-92.
- K. N. Sjobak, E. Adli, and A. Grudiev, “Surface Field Optimization of Accelerating Structures for CLIC using ACE3P on Remote Computing Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO011, pp. 909-911.
- A. Furman, “Hourglass Effects for Asymmetric Colliders”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 422-425.
- W. Müller and W. Wolff, “On the Design of the Magnetic Field for a 450 MeV Proton Machine”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63H05, pp. XX-XX.
- K. Chida, K. Noda, T. Tanabe, and I. Watanabe, “An Electrostatic Storage Ring for Molecular Science”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP3B16, pp. 797-802.
- Y. Miyahara, “Computer Simulation of Stabilizing the Radiation Power of Storage Ring Free Electron Laser”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 879-882.
- J. W. Xia, Y. Liu, L. J. Mao, R. S. Mao, J. C. Yang, and Y. J. Yuan, “Lanzhou Cooler Storage Ring Commissioning”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THYMH01, pp. 3611-3615.
- V. Kamerdzhiev et al., “BPM System Upgrade at COSY”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 303-306.
- F. Gougnaud and P. Mattei, “The First Steps of the Beam Intensity Measurement of the Spiral2 Injector”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP053, pp. 504-506.
- M. J. Barnes et al., “Operational Experience of the Upgraded LHC Injection Kicker Magnets”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3623-3626.
- R. A. Baartman, G. Franchetti, and E. M?®tral, “Summary of Group A: Beam Dynamics in High Intensity Circular Machines”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper CPL01, pp. 482-484.
- D. J. MacNair, M. A. Kemp, K. J. P. Macken, M. N. Nguyen, and J. J. Olsen, “SLAC P2 MARX Control System and Regulation Scheme”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP196, pp. 1193-1195.
- V. H. Hardion, J. Lidon-Simon, M. Lindberg, A. Milan-Otero, A. G. Persson, and D. P. Spruce, “The Internet of Things and Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCB09, pp. 974-977.
- T. H. Harutunyan, E. D. Gazazyan, and M. K. Khojoyan, “The Strict Solution of a Radiation Problem in Toroidal Cavity”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS001, pp. 3260-3262.
- A. Ballarino, S. A. March, and K. H. Mess, “Commissioning of the LHC Current Leads”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD018, pp. 2446-2448.
- Z. R. Wolf, S. D. Anderson, V. Kaplounenko, Yu. I. Levashov, and A. W. Weidemann, “LCLS Undulator System Tuning and Magnetic Measurements”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP088, pp. 336-338.
- V. G. Khachatryan, W. Decking, V. V. Sahakyan, A. Tarloyan, and V. M. Tsakanov, “Optimization of the Focusing Lattice for European XFEL”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC014, pp. 97-99.
- J. Branlard et al., “European XFEL RF Gun Commissioning and LLRF Linac Installation”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2427-2429.
- A. Orlov and E. V. Efremov, “Transient Effects in the Linear Accelerator for Free Electron Laser”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 781-784.
- L. M. C. Feliciano et al., “A New Hardware Design for PSB Kicker Magnets (KSW) for the 35 mm Transverse Painting in the Horizontal Plane”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3890-3892.
- A. L. Lin and G. Travish, “Use of Monocapillary X-Ray Optics as a Means to Reduce Linewidth and Fluctuations in SASE FELs”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper THOB04, pp. 539-542.
- P. Singhai, P. Dhara, A. Roy, and S. Chatterjee, “Digital Pulse Processing Techniques for High Resolution Amplitude Measurement of Radiation Detector”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper FRCC04, pp. 279-281.
- P. L. Morton, “Artificial Beam Enlargement”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 862-863.
- G. T. Danby, J. W. Jackson, and E. C. Raka, “AGS Lattice Corrections and Tuning Using Backleg Windings”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1007-1009.
- S. R. Norum et al., “The Machine Protection System for the Linac Coherent Light Source”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP093, pp. XX-XX.
- J. Bobnar, C. K. Allen, S. Peggs, T. A. Pelaia, T. Satogata, and C. G. Trahern, “Applicability of XAL for ESS”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL029, pp. 85-87.
- T. Wlostowski, J. Serrano, and F. Vaga, “Developing Distributed Hard-Real Time Software Systems Using FPGAs and Soft Cores”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1073-1078.
- Y. Valdau, S. Mikirtytchiants, S. Trusov, L. Eltcov, and P. Wuestner, “Development of High Resolution Beam Current Measurement System for COSY-J??lich”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 434-437.
- G. Carcassi and K. Shroff, “Pvmanager: A Java Library for Real-Time Data Processing”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC134, pp. 903-905.
- A. O. Hanson, D. Jamnik, C. S. Robinson, and C. L. Rogers, “Plans for a Superconducting CW Electron Linac at the University of Illinois”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper X-02, pp. 494-496.
- K. I. Mihailov, E. A. Golubkov, V. Kobets, A. N. Repkin, A. P. Sumbaev, and V. M. Pavlov, “Upgrade of the RF System on the LUE-200”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 256-257.
- M. Loiselet, N. Postiau, and G. Ryckewaert, “Status Report of Cyclone”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper I-16, pp. 82-85.
- T. Takahashi, M. Izawa, S. Sakanaka, and K. Umemori, “Renewal of Klystron Power Supply for the Photon Factory Storage Ring at KEK”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP087, pp. 1035-1037.
- S. J. Full et al., “A Fast Rotating Wire Scanner for use in High Current Accelerators”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOBA1, pp. 385-387.
- T. Shimada et al., “Thermal Deformation of Magnetic Alloy Cores for J-PARC RCS RF Cavities”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA019, pp. 3717-3719.
- W. B. Herrmannsfeldt, H. A. Hogg, G. A. Loew, and R. B. Neal, “Feasibility Study of a Two-Mile Superconducting Linac”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1004-1009.
- B. A. Tatum, D. T. Dowling, R. S. Lord, S. W. Mosko, and D. K. Olsen, “Design, Construction, and Field Mapping of the HISTRAP Prototype Dipole”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 393-396.
- W. Le Coz, C. Doutresssoulles, C. Jamet, G. Ledu, S. Loret, and C. Potier de courcy, “Measurement and Control of the Beam Energy for the SPIRAL2 Accelerator”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF32, pp. 897-899.
- P. Tallerico et al., “An RF-Driven Lasertron”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-02, pp. 528-530.
- X. Escaler, V. Arbo Sang?â, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Thermo-Fluid Numerical Simulation of the Crotch Absorbers' Cooling Pinholes for ALBA Storage Ring”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 165-168.
- E. Sabia, G. Dattoli, C. R. Frascati, and A. Dipace, “Free Electron Laser Triggered Photo-Cathode”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH032, pp. 641-644.
- N. Ouchi et al., “Design and Development Work for a Superconducting Proton Linac at JAERI”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A03, pp. 22-26.
- M. Pokorny et al., “Distributed Control System for the Test Interferometer of the ALMA Project”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAT004, pp. XX-XX.
- M. S. Champion et al., “Plans for an Integrated Front-End Test Stand at the Spallation Neutron Source”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB044, pp. 954-956.
- L. M. Bollinger, “Superconducting Heavy-Ion Linacs”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1076-1081.
- B. Rusnak et al., “Status of RF Superconductivity at Los Alamos National Laboratory”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93B05, pp. XX-XX.
- Z. Kormány, “A compact device for measuring and monitoring the energy of accelerated particle beams”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 752-755.
- S. Wang and J. Deng, “Acceleration Module in Linear Induction Accelerator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD073, pp. 4449-4451.
- C. Adolphsen et al., “Design, Fabrication and Measurement of the First Rounded Damped Detuned Accelerator Structure (RDDS1)”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUA03, pp. 377-379.
- J. J. Kritzinger, A. H. Botha, P. M. Cronje, P. R. de Kock, R. E. F. Fenemore, and M. J. van Niekerk, “Pulse Selection and Rebunching in the NAC Transfer Beamline”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I2-15, pp. 384-387.
- B. N. Kosciuk, C. Hetzel, J. A. Kierstead, V. Ravindranath, S. K. Sharma, and O. Singh, “Development and Testing of Carbon Fiber Vacuum Chamber Supports for NSLS-II”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP286, pp. 1364-1366.
- J. B. Flanz, “Symmetry Corrected Second Order Achromat”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1349-1352.
- J. T. Seeman, M. Browne, P. Emma, T. Himel, K. Jobe, and N. Walker, “Linac Final Focus Feed-Forward for Increasing the SLC Luminosity”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1376-1379.
- P. Chu, S. Chevtsov, G. B. Shen, and J. Wu, “Service Oriented Architecture for High Level Applications”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC072, pp. 1886-1888.
- Y. Chiba, K. Ohtomo, T. Rizawa, and M. Wakasugi, “Ferrite Evaluation Test for MUSES”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4B13, pp. 1987-1989.
- A. Zholents, M. Zolotorev, and W. Wan, “Generation of Attosecond Electron Bunches”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FOAC004, pp. 723-725.
- V. A. Moiseev and P. N. Ostroumov, “Longitudinal Dynamics Simulation of the High Intensity Beam in the MMF Storage Ring”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1714-1717.
- T. Shaftan et al., “Microbunching and Beam Break-up in DUV FEL Accelerator”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOPD005, pp. 329-331.
- J. F. DeFord and B. Held, “Periodic Boundary Conditions in the Parallel Eigensolver OM3P: Application of the Inexact Lanczos Process to Hermitian Systems”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAG051, pp. 3554-3556.
- M. Ritzert, E. Blanco Vinuela, M. Ostrega, and L. Zwalinski, “UNICOS Framework and EPICS: A Possible Integration”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 915-917.
- Z. D. Farkas, G. Spalek, and P. B. Wilson, “RF Pulse Compression Experiment at SLAC”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 132-135.
- J. Etter, K. Jenkins, and D. Nelson, “Computer Control for the Maryland Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 873-875.
- R. Perry, “Some Thoughts Related to Cryogenic Linacs”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper B-15, pp. 206-208.
- Y. Jongen, M. Abs, S. Zaremba, T. Delvigne, and A. Herer, “Realignment of a Diverging Electron Beam: A New Beam Delivery System for Rhodotrons”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P103, pp. 3857-3859.
- V. A. Isaev, N. Claesson, M. Plesko, and K. Zagar, “EPICS Data Acquisition Device Support”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC059, pp. 707-709.
- V. G. Dudnikov et al., “Saddle Antenna RF Ion Sources for Efficient Positive and Negative Ions Production”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 4060-4062.
- R. D. Hay, “The Design of Beam Inflector Magnets for Ultrhigh Vacuum Operation”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 746-750.
- D. Martin et al., “Finalized Design of the SSC RFQ-DTL Matching Section”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1703-1706.
- S. Matsumoto et al., “High Power Testing Results of the X-Band Mixed-Mode RF Windows for Linear Colliders”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THA02, pp. 736-738.
- D. J. Liska and L. B. Dauelsberg, “Performance of the LAMPF Particle Separator”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1577-1580.
- N. M. Kroll and K. Ko, “Mode Filter Designfor the NLC Overmoded RF Power Transport System”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2010-2013.
- L. Maunoury et al., “SPIRAL1 Charge Breeder: Performances and Status”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 35-38.
- G. H. Mackenzie, M. K. Craddock, G. Dutto, R. E. Laxdal, J. R. Richardson, and M. Zach, “Plans for the Extraction of Intense Beams of H Ions from the TRIUMF Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper E03, pp. 233-236.
- I. Rutkowski, L. Butkowski, M. Hoffmann, H. Schlarb, and Ch. Schmidt, “REGAE LLRF Control System Overview”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA031, pp. 3210-3212.
- J. P. Dai, B. Ni, J. Y. Zhai, and J. R. Zhang, “Design Study of a Compact Deflecting Cavity at IHEP”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2188-2190.
Back to search