Favourites
For Word
[n] Y. Zou and M. Olveg?Ñrd, “Studies on Beam Collimation System for the ESSnuSB Accumulator”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4107-4110. doi:10.18429/JACoW-IPAC2021-THPAB176
[n] A. De Santis et al., “DANE Transfer Line for KLOE-2 Physics Run”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3797-3799. doi:10.18429/JACoW-IPAC2014-THPRI015
[n] J. Sestak, V. Baglin, G. Bregliozzi, and P. Chiggiato, “Present Quality Assurance for the LHC Beam Vacuum System and its Future Improvement”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3103-3105. doi:10.18429/JACoW-IPAC2015-WEPHA004
[n] L. Wang, A. Chao, and J. Wei, “Geometric Effects on Electron Cloud”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS081, pp. 4243-4245.
[n] D. Horan and Y. Kang, “Design and Construction of a 1-MW, 352-MHz RF Test Load”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P036, pp. 3687-3689.
[n] M. Wakasugi and T. Katayama, “Design of an Elliptical Undulator and X-Ray Beam Line at DSR of RIKEN RI Beam Factory Project”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P030, pp. 3521-3523.
[n] R. Ostojic, T. M. Taylor, and S. Weisz, “Systems Layout of the Low-$eta$ Insertions for the LHC Experiments”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P039, pp. 3696-3698.
[n] M. H. Wang, C. C. Kuo, and C. S. Hsue, “Linear Beam Dynamics Effects of Three Dimensional Static Magnetic Fields of Insertion Devices at SRRC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P033, pp. 3533-3535.
[n] W.-H. Huang, Q. Du, Y.-C. Du, H. J. Qian, C.-X. Tang, and L. X. Yan, “Design and Beam Dynamics Simulation for the Photoinjector of Shanghai Soft X-ray Free Electron Laser Test Facility”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper TUPB19, pp. 299-301.
[n] E. Sargsyan et al., “ESS Normal Conducting Linac Status and Plans”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 781-783. doi:10.18429/JACoW-LINAC2018-THPO043
[n] S. Di Mitri, M. Cornacchia, and H.-S. Kang, “Merit Functions for the Linac Optics Design for Colliders and Light Sources”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1159-1161. doi:10.18429/JACoW-IPAC2014-TUPRO056
[n] R. B. Fiorito et al., “Simulation of Coherent Optical Transition Radiation in Linac Based Free Electron Lasers”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC49, pp. 356-359.
[n] G. J. Bobbink, I. C. Brock, D. A. Dean, S. W. Herb, R. W. Kraemer, and R. B. Sutton, “High Rate Luminosity Monitors for CESR”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 754-757.
[n] R. O. Hettel, “Challenges in the Design of Diffraction-limited Storage Rings”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 7-11. doi:10.18429/JACoW-IPAC2014-MOXBA01
[n] S. X. Zheng et al., “Status of CPHS Project”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO051, pp. 3887-3889.
[n] A. Novokhatski et al., “Damping the High Order Modes in the Pumping Chamber of the PEP-II Low Energy Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT135, pp. 854-856.
[n] P. Duval and S. W. Herb, “The TINE Control System Protocol: How to Achieve High Scalability and Performance”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WECOAA02, pp. 19-21.
[n] Y. Zou et al., “Status of the ESSnuSB Accumulator Design”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 666-668. doi:10.18429/JACoW-IPAC2019-MOPRB046
[n] S. W. Herb, “Construction and Measurement of Large Permanent Magnet Quadrupoles”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1434-1437.
[n] M. Olveg?Ñrd, E. Adli, A. E. Dabrowski, S. D?Âbert, and T. Lef?¿vre, “Time Resolved Spectrometry on the Test Beam Line at CTF3”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB40, pp. 257-259.
[n] S. Hancock, P. Knaus, and M. Lindroos, “Tomographic Measurements of Longitudinal Phase Space Density”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP08H, pp. 1520-1522.
[n] W. Pellico and P. Colestock, “Pulsed Magnetic Field Measurement Using a Ferrite Waveguide in a Phase Bridge Circuit”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P050, pp. 3716-3718.
[n] A. Pidatella et al., “Metallic neutral vapours diffusion in electron cyclotron resonance ion sources : fluid dynamics and particle tracing simulations”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2402-2405. doi:10.18429/JACoW-IPAC2023-TUPM085
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Zou and M. Olveg?Ñrd, “Studies on Beam Collimation System for the ESSnuSB Accumulator”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4107-4110.
- A. De Santis et al., “DANE Transfer Line for KLOE-2 Physics Run”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3797-3799.
- J. Sestak, V. Baglin, G. Bregliozzi, and P. Chiggiato, “Present Quality Assurance for the LHC Beam Vacuum System and its Future Improvement”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3103-3105.
- L. Wang, A. Chao, and J. Wei, “Geometric Effects on Electron Cloud”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS081, pp. 4243-4245.
- D. Horan and Y. Kang, “Design and Construction of a 1-MW, 352-MHz RF Test Load”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P036, pp. 3687-3689.
- M. Wakasugi and T. Katayama, “Design of an Elliptical Undulator and X-Ray Beam Line at DSR of RIKEN RI Beam Factory Project”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P030, pp. 3521-3523.
- R. Ostojic, T. M. Taylor, and S. Weisz, “Systems Layout of the Low-$eta$ Insertions for the LHC Experiments”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P039, pp. 3696-3698.
- M. H. Wang, C. C. Kuo, and C. S. Hsue, “Linear Beam Dynamics Effects of Three Dimensional Static Magnetic Fields of Insertion Devices at SRRC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P033, pp. 3533-3535.
- W.-H. Huang, Q. Du, Y.-C. Du, H. J. Qian, C.-X. Tang, and L. X. Yan, “Design and Beam Dynamics Simulation for the Photoinjector of Shanghai Soft X-ray Free Electron Laser Test Facility”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper TUPB19, pp. 299-301.
- E. Sargsyan et al., “ESS Normal Conducting Linac Status and Plans”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 781-783.
- S. Di Mitri, M. Cornacchia, and H.-S. Kang, “Merit Functions for the Linac Optics Design for Colliders and Light Sources”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1159-1161.
- R. B. Fiorito et al., “Simulation of Coherent Optical Transition Radiation in Linac Based Free Electron Lasers”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC49, pp. 356-359.
- G. J. Bobbink, I. C. Brock, D. A. Dean, S. W. Herb, R. W. Kraemer, and R. B. Sutton, “High Rate Luminosity Monitors for CESR”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 754-757.
- R. O. Hettel, “Challenges in the Design of Diffraction-limited Storage Rings”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 7-11.
- S. X. Zheng et al., “Status of CPHS Project”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO051, pp. 3887-3889.
- A. Novokhatski et al., “Damping the High Order Modes in the Pumping Chamber of the PEP-II Low Energy Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT135, pp. 854-856.
- P. Duval and S. W. Herb, “The TINE Control System Protocol: How to Achieve High Scalability and Performance”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WECOAA02, pp. 19-21.
- Y. Zou et al., “Status of the ESSnuSB Accumulator Design”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 666-668.
- S. W. Herb, “Construction and Measurement of Large Permanent Magnet Quadrupoles”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1434-1437.
- M. Olveg?Ñrd, E. Adli, A. E. Dabrowski, S. D?Âbert, and T. Lef?¿vre, “Time Resolved Spectrometry on the Test Beam Line at CTF3”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPB40, pp. 257-259.
- S. Hancock, P. Knaus, and M. Lindroos, “Tomographic Measurements of Longitudinal Phase Space Density”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP08H, pp. 1520-1522.
- W. Pellico and P. Colestock, “Pulsed Magnetic Field Measurement Using a Ferrite Waveguide in a Phase Bridge Circuit”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P050, pp. 3716-3718.
- A. Pidatella et al., “Metallic neutral vapours diffusion in electron cyclotron resonance ion sources : fluid dynamics and particle tracing simulations”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM085, pp. 2402-2405.
Back to search