JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	N. Bazin et al., “Status of the IFMIF LIPAc SRF Linac”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 74-77. doi:10.18429/JACoW-SRF2017-MOPB012
[n]	R. Kersevan, “Status of the ESRF Vacuum System”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP03C, pp. 2178-2180. 
[n]	G. Franzini et al., “Final Design and Features of the B-train System of CNAO”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB079, pp. 2878-2880. 
[n]	P. Chevtsov and M. G. Tiefenback, “Beam Emittance Measurement Tool for CEBAF Operations”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOZ03, pp. 25-27. 
[n]	G. Iadarola, B. Bradu, P. Dijkstal, L. Mether, and G. Rumolo, “Impact and Mitigation of Electron Cloud Effects in the Operation of the Large Hadron Collider”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2085-2088. doi:10.18429/JACoW-IPAC2017-TUPVA019
[n]	Y. Aoki et al., “Experimental Results of a Photocathode RF Gun driven by a Stabilized All-Solid ps Laser”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5A14, pp. 1678-1680. 
[n]	G. Torrisi et al., “Microwave Injection and Coupling Optimization in ECR and MDIS Ion Sources”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1724-1726. doi:10.18429/JACoW-IPAC2017-TUPIK021
[n]	S. Aronson, F. Caspers, H. Haseroth, J. Knott, and W. Willis, “Model Measurements for the Switched Power Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 121-124. 
[n]	K. M. Krushelnick et al., “Electron Acceleration Experiments Using the Hercules Laser System at the University of Michigan”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC011, pp. 4074-4076. 
[n]	M. Hoffmann et al., “Operation of Normal Conducting RF Guns with MicroTCA.4”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 841-843. doi:10.18429/JACoW-IPAC2015-MOPHA028
[n]	S. Strokov, G. Kube, M. Lantschner, and D. Lipka, “First measurements of a prototype stripline BPM for PETRA IV comparison with simulation”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 680-684. doi:10.18429/JACoW-IBIC2025-WEPCO26
[n]	R. M. Bodenstein, Y. Roblin, and M. G. Tiefenback, “Real Beam Line Optics from a Synthetic Beam”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE050, pp. 4629-4631. 
[n]	D. O. Calcoen, S. Gabourin, and A. P. Siemko, “CERN Beam Interlock Redundant Dump Trigger Module Performance during LHC Run 2”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4189-4191. doi:10.18429/JACoW-IPAC2016-THPOY041
[n]	M. G. Abbott and T. M. Cobb, “An EPICS IOC Builder”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU032, pp. 506-509. 
[n]	M. J. Furseman et al., “Adopting and Adapting Control System Studio at Diamond Light Source”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1032-1035. doi:10.18429/JACoW-ICALEPCS2015-WEPGF137
[n]	A. Endo, K. Sakaue, M. Washio, and H. Mizoguchi, “Optimization of High Average Power FEL Beam for EUV Lithography Application”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper FRA04, pp. 990-992. 
[n]	K. Sakaue, A. Endo, and M. Washio, “Design of High Brightness Light Source based on Laser-Compton Undulator for EUV Lithography Mask Inspection”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA036, pp. 148-150. 
[n]	V. Kobets et al., “The Electron Linear Accelerator LUE-200 - Driver the IREN Facility”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC010, pp. 346-348. 
[n]	T. M. Cobb, Y. S. Chernousko, and I. S. Uzun, “ZEBRA: a Flexible Solution for Controlling Scanning Experiments”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC069, pp. 736-739. 
[n]	O. Dadoun and P. Bambade, “Backscattering of Secondary Particles into the ILC Detectors from Beam Losses Along the Extraction Lines”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN009, pp. 2725-2727. 
[n]	R. H. A. Farias, L. C. Jahnel, A. R. D. Rodrigues, and P. F. Tavares, “Ramping Efficiency Studies in the LNLS Synchrotron Light Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P057, pp. 3740-3742. 
[n]	L. Celona et al., “A High Intensity Proton Source for the European Spallation Source Facility”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2509-2511. doi:10.18429/JACoW-IPAC2015-WEPWA010
[n]	G. M. wang et al., “Experimental Progress of DC-SC Photoinjector at Peking University”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP048, pp. XX-XX. 
[n]	K. Skoufaris, Y. Papaphilippou, J. Laskar, and Ch. Skokos, “Implementation of High Order Symplectic Integrators with Positive Steps in Tracking Programs”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3484-3487. doi:10.18429/JACoW-IPAC2016-THPMR041
[n]	J. Chen et al., “Status of SRF activities for the SHINE project”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 31-36. doi:10.18429/JACoW-SRF2025-MOB04

For LaTeX

Use Complete Form

For BibTeX

References

Back to search