Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. E. Laxdal et al., “Recent Progress in the Superconducting RF Program at TRIUMF/ISAC”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper MOP06, pp. 128-132.
[n] D. Van Winkle et al., “Commissioning of the LHC Low Level RF System Remote Configuration Tools”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA063, pp. 1479-1481.
[n] L. J. Chen et al., “Optimization of Staggered Array Undulator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4171-4173. doi:10.18429/JACoW-IPAC2019-THPTS029
[n] L. Popielarski, L. J. Dubbs, K. Elliott, I. M. Malloch, R. Oweiss, and J. Popielarski, “Buffered Chemical Polishing Development for the =0.53 Half-Wave Resonator at Michigan State University”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO057, pp. 526-529.
[n] M. P. Kelly, M. Kedzie, and Z. C. Liu, “A Simple Second Sound Detection Technique for SRF Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO032, pp. 273-275.
[n] T. P. Hughes, D. C. Moir, and P. W. Allison, “Beam Injector and Transport Calculations for ITS”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAE08, pp. 1207-1209.
[n] R. L. Kustom, “Accelerator Technology in Tokamaks”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1233-1239.
[n] F. Nolden and J. X. Wu, “Signals from a Beam Performing Betatron Oscillations Using an Electrostatic Electrode Model with Rectangular Boundaries”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper MOPF09, pp. 51-54.
[n] J. E. Spencer, E. R. Colby, R. J. Noble, D. T. Palmer, and R. Siemann, “Beam Dynamics Studies for a Laser Acceleration Experiment”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAE028, pp. 2024-2026.
[n] S. Kwiatkowski et al., “quot;CAMSHAFTquot; Bunch Kicker Design for the ALS Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS114, pp. 3547-3549.
[n] K. Takayama et al., “Induction Synchrotron (3): Rapid Cycle Synchrotron and Slow Cycle Synchrotron (Hardware Components for the Upgrade of KEK 12 GeV-PS)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH028, pp. 3287-3289.
[n] S. K. Kauffmann, D. M. Ritson, and Y. T. Yan, “Implementation of One-Turn Maps in SSCTRK Using ZLIB”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 339-342.
[n] R. A. Legg et al., “LCLS-II Cryomodule Production at JLab”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 163-167. doi:10.18429/JACoW-SRF2017-MOPB046
[n] Y. A. Svistunov and M. F. Vorogushin, “Design and Construction of CDTC Accelerating System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI104, pp. 2810-2812.
[n] J. Y. Tang et al., “EPICS Software Development for SNS VME Based Timing and RTDL System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP068, pp. XX-XX.
[n] D. Quatraro and G. Rumolo, “Non Relativistic Resistive Wall Wake Fields and Single Bunch Stability”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP014, pp. 3217-3219.
[n] J. Corlett, C.-K. Ng, and S. R. Smith, “Effect of TE Mode Power on the PEP-II LER BPM System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P085, pp. 2116-2118.
[n] S. W. Mosko, J. A. Martin, E. D. Hudson, L. N. Howell, and M. L. Mallory, “A Heavy-ion Accelerator Facility Featuring a Separated-Sector Isochronous Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69A05, pp. XX-XX.
[n] B. Aune et al., “First Operation of MACSE the Saclay Pilot Superconducting Electron Linac”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2393-2396.
For LaTeX
Use Complete Form
For BibTeX
References
- R. E. Laxdal et al., “Recent Progress in the Superconducting RF Program at TRIUMF/ISAC”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper MOP06, pp. 128-132.
- D. Van Winkle et al., “Commissioning of the LHC Low Level RF System Remote Configuration Tools”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA063, pp. 1479-1481.
- L. J. Chen et al., “Optimization of Staggered Array Undulator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4171-4173.
- L. Popielarski, L. J. Dubbs, K. Elliott, I. M. Malloch, R. Oweiss, and J. Popielarski, “Buffered Chemical Polishing Development for the =0.53 Half-Wave Resonator at Michigan State University”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO057, pp. 526-529.
- M. P. Kelly, M. Kedzie, and Z. C. Liu, “A Simple Second Sound Detection Technique for SRF Cavities”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO032, pp. 273-275.
- T. P. Hughes, D. C. Moir, and P. W. Allison, “Beam Injector and Transport Calculations for ITS”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAE08, pp. 1207-1209.
- R. L. Kustom, “Accelerator Technology in Tokamaks”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1233-1239.
- F. Nolden and J. X. Wu, “Signals from a Beam Performing Betatron Oscillations Using an Electrostatic Electrode Model with Rectangular Boundaries”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper MOPF09, pp. 51-54.
- J. E. Spencer, E. R. Colby, R. J. Noble, D. T. Palmer, and R. Siemann, “Beam Dynamics Studies for a Laser Acceleration Experiment”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAE028, pp. 2024-2026.
- S. Kwiatkowski et al., “quot;CAMSHAFTquot; Bunch Kicker Design for the ALS Storage Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS114, pp. 3547-3549.
- K. Takayama et al., “Induction Synchrotron (3): Rapid Cycle Synchrotron and Slow Cycle Synchrotron (Hardware Components for the Upgrade of KEK 12 GeV-PS)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH028, pp. 3287-3289.
- S. K. Kauffmann, D. M. Ritson, and Y. T. Yan, “Implementation of One-Turn Maps in SSCTRK Using ZLIB”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 339-342.
- R. A. Legg et al., “LCLS-II Cryomodule Production at JLab”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 163-167.
- Y. A. Svistunov and M. F. Vorogushin, “Design and Construction of CDTC Accelerating System”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI104, pp. 2810-2812.
- J. Y. Tang et al., “EPICS Software Development for SNS VME Based Timing and RTDL System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP068, pp. XX-XX.
- D. Quatraro and G. Rumolo, “Non Relativistic Resistive Wall Wake Fields and Single Bunch Stability”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP014, pp. 3217-3219.
- J. Corlett, C.-K. Ng, and S. R. Smith, “Effect of TE Mode Power on the PEP-II LER BPM System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P085, pp. 2116-2118.
- S. W. Mosko, J. A. Martin, E. D. Hudson, L. N. Howell, and M. L. Mallory, “A Heavy-ion Accelerator Facility Featuring a Separated-Sector Isochronous Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69A05, pp. XX-XX.
- B. Aune et al., “First Operation of MACSE the Saclay Pilot Superconducting Electron Linac”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2393-2396.
Back to search