Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Woodley, T. O. Raubenheimer, A. Wolski, and J. Wu, “A Lattice with Larger Momentum Compaction for the NLC Main Damping Rings”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB025, pp. 2775-2777.
[n] S. Hara, T. Iga, and M. Tanaka, “Development of a Permanent Magnet Microwave Ion Source for Medical Accelerators”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS094, pp. 1723-1725.
[n] J. M. Filhol, “ESRF Booster Synchrotron: Characteristics and Achieved Performances”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 471-474.
[n] C. Agritellis, R. Chasman, and Th. J. M. Sluyters, “Design of the Low - Energy Beam Transport System of the Brookhaven 200 - Me V Injector Linac”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 221-227.
[n] D. B. Cline, B. Cole, J. Norem, and J. Rosenzweig, “Transverse Focussing Using Plasma Wake Fields”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 154-157.
[n] T. Nishikawa, “A Study of Field Distribution and Beam Loading in Proton Linacs at High Energies”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 630-634.
[n] A. N. Fedorova and M. G. Zeitlin, “Orbital Motion in Multipole Fields via Multiscale Decomposition”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 405-407. doi:10.18429/JACoW-RUPAC2016-WEPSB019
[n] R. Boni, A. Gallo, and F. Marcellini, “High Power Test of the Waveguide Loaded RF Cavity for the Frascati PHI-Factory Main Rings”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP032L, pp. 1979-1981.
[n] C.-G. Yao, “Design of CEBAF's RF Separator and Results of Cold Tests”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-51, pp. 437-441.
[n] C. Thomas-Madec et al., “High Power (35 kW and 190 kW) 352 MHz Solid State Amplifiers for the SOLEIL Synchrotron”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP36, pp. 544-546.
[n] D. Trbojevic, J. S. Berg, M. Blaskiewicz, E. D. Courant, A. A. Garren, and R. Palmer, “FFAG Lattice for Muon Acceleration with Distributed RF”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG003, pp. 1816-1818.
[n] L. Picardi, C. Ronsivalle, A. Tata, and A. Vignati, “The Italian IORT Project""”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B04, pp. 2545-2547.
[n] V. Bechthold, K. Aulenbacher, M. A. Dehn, and S. Friederich, “Investigation of K2CsSb Photocathodes”, in Proc. ERL'17, Geneva, Switzerland, Jun. 2017, pp. 4-8. doi:10.18429/JACoW-ERL2017-MOPSPP004
[n] R. J. Briggs, “Linear Induction Accelerators”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO1-2, pp. 10-13.
[n] G. Costanza, “On the Optimal Design of Elliptical Superconducting Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2565-2567. doi:10.18429/JACoW-IPAC2014-WEPRI040
[n] H. W. Schreuder, “Invited Paper: AGOR: Initial Beam Tests, Transport and Commissioning”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper A-01, pp. 6-11.
[n] L. M. Volpe et al., “High Heat Load Front Ends for Sirius”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 324-326. doi:10.18429/JACoW-MEDSI2016-WEPE06
[n] D. J. Clark, “Departed Cyclotron Pioneers”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper A-4, pp. XX-XX.
[n] E. V. Bulyak, J. Urakawa, and F. Zimmermann, “Fast Cooling of Bunches in Compton Storage Rings”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPZ011, pp. 2790-2792.
[n] K. Hayashi, K. Hemmi, H. Iyeki, and T. Onodera, “X-Band High Power Pulsed Klystron”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-15, pp. 562-564.
[n] A. S. Fisher et al., “Design and Initial Commissioning of Beam Diagnostics for the PEP-II B Factory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P065, pp. 2253-2255.
[n] S. Weih et al., “Upgrade of the S-DALINAC Injector Capture Section”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 227-229. doi:10.18429/JACoW-SRF2019-MOP065
[n] T. Suwada, K. Furukawa, and M. Satoh, “Development of a New Beam-Energy-Spread Monitor Using Multi-Stripline Electrodes”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAB012, pp. 533-535.
[n] I. Chaikovska, L. Burmistrov, N. Delerue, and A. Variola, “Optical Fiber Beam Loss Monitor for the PHIL and ThomX Facilities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3433-3435. doi:10.18429/JACoW-IPAC2014-THPME086
[n] J.-F. Ostiguy, K. Y. Ng, R. M. Jones, Z. Li, and N. M. Kroll, “Comparative Study of Medium Damped and Detuned Linear Accelerator Structures”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH050, pp. 3789-3791.
[n] J. Wei, M. Blaskiewicz, and J. M. Brennan, “Stochastic Cooling Power Requirements”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT177, pp. 941-943.
[n] P. Cameron et al., “Proposal for a Cavity Polarimeter at MIT-Bates”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH136, pp. 2403-2403.
[n] Rok Ursic, Roger Flood, Chip Piller, Edward Strong, Larry Turlington, “1 nA Beam Position Monitoring System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P089, pp. 2131-2133.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Woodley, T. O. Raubenheimer, A. Wolski, and J. Wu, “A Lattice with Larger Momentum Compaction for the NLC Main Damping Rings”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB025, pp. 2775-2777.
- S. Hara, T. Iga, and M. Tanaka, “Development of a Permanent Magnet Microwave Ion Source for Medical Accelerators”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS094, pp. 1723-1725.
- J. M. Filhol, “ESRF Booster Synchrotron: Characteristics and Achieved Performances”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 471-474.
- C. Agritellis, R. Chasman, and Th. J. M. Sluyters, “Design of the Low - Energy Beam Transport System of the Brookhaven 200 - Me V Injector Linac”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 221-227.
- D. B. Cline, B. Cole, J. Norem, and J. Rosenzweig, “Transverse Focussing Using Plasma Wake Fields”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 154-157.
- T. Nishikawa, “A Study of Field Distribution and Beam Loading in Proton Linacs at High Energies”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 630-634.
- A. N. Fedorova and M. G. Zeitlin, “Orbital Motion in Multipole Fields via Multiscale Decomposition”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 405-407.
- R. Boni, A. Gallo, and F. Marcellini, “High Power Test of the Waveguide Loaded RF Cavity for the Frascati PHI-Factory Main Rings”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP032L, pp. 1979-1981.
- C.-G. Yao, “Design of CEBAF's RF Separator and Results of Cold Tests”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-51, pp. 437-441.
- C. Thomas-Madec et al., “High Power (35 kW and 190 kW) 352 MHz Solid State Amplifiers for the SOLEIL Synchrotron”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP36, pp. 544-546.
- D. Trbojevic, J. S. Berg, M. Blaskiewicz, E. D. Courant, A. A. Garren, and R. Palmer, “FFAG Lattice for Muon Acceleration with Distributed RF”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPG003, pp. 1816-1818.
- L. Picardi, C. Ronsivalle, A. Tata, and A. Vignati, “The Italian IORT Project""”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5B04, pp. 2545-2547.
- V. Bechthold, K. Aulenbacher, M. A. Dehn, and S. Friederich, “Investigation of K2CsSb Photocathodes”, in Proc. 59th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'17), Geneva, Switzerland, Jun. 2017, pp. 4-8.
- R. J. Briggs, “Linear Induction Accelerators”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO1-2, pp. 10-13.
- G. Costanza, “On the Optimal Design of Elliptical Superconducting Cavities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2565-2567.
- H. W. Schreuder, “Invited Paper: AGOR: Initial Beam Tests, Transport and Commissioning”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper A-01, pp. 6-11.
- L. M. Volpe et al., “High Heat Load Front Ends for Sirius”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 324-326.
- D. J. Clark, “Departed Cyclotron Pioneers”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper A-4, pp. XX-XX.
- E. V. Bulyak, J. Urakawa, and F. Zimmermann, “Fast Cooling of Bunches in Compton Storage Rings”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPZ011, pp. 2790-2792.
- K. Hayashi, K. Hemmi, H. Iyeki, and T. Onodera, “X-Band High Power Pulsed Klystron”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-15, pp. 562-564.
- A. S. Fisher et al., “Design and Initial Commissioning of Beam Diagnostics for the PEP-II B Factory”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P065, pp. 2253-2255.
- S. Weih et al., “Upgrade of the S-DALINAC Injector Capture Section”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 227-229.
- T. Suwada, K. Furukawa, and M. Satoh, “Development of a New Beam-Energy-Spread Monitor Using Multi-Stripline Electrodes”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAB012, pp. 533-535.
- I. Chaikovska, L. Burmistrov, N. Delerue, and A. Variola, “Optical Fiber Beam Loss Monitor for the PHIL and ThomX Facilities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3433-3435.
- J.-F. Ostiguy, K. Y. Ng, R. M. Jones, Z. Li, and N. M. Kroll, “Comparative Study of Medium Damped and Detuned Linear Accelerator Structures”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH050, pp. 3789-3791.
- J. Wei, M. Blaskiewicz, and J. M. Brennan, “Stochastic Cooling Power Requirements”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT177, pp. 941-943.
- P. Cameron et al., “Proposal for a Cavity Polarimeter at MIT-Bates”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH136, pp. 2403-2403.
- Rok Ursic, Roger Flood, Chip Piller, Edward Strong, Larry Turlington, “1 nA Beam Position Monitoring System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P089, pp. 2131-2133.
Back to search