Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. S. Wang et al., “ALGORITHM AND CIRCUIT TO IMPROVE ZERO-CROSSING STABILITY OF BIPOLAR TPS TRIM COIL POWER SUPPLY”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3206-3208. doi:10.18429/JACoW-IPAC2015-WEPHA041
[n] P. Vagin, P. Neumann, and M. Tischer, “Magnetic Measurement Developments for Undulators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2016-2018. doi:10.18429/JACoW-IPAC2014-WEPRO034
[n] G. Huang, J. M. Byrd, L. R. Doolittle, J. W. Staples, and R. B. Wilcox, “Stable Transmission of Radio Frequency Signals on Fiber Links Using Interferometric Delay Sensing”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM081, pp. 372-374.
[n] R. Gobin, O. Delferriere, F. Harrault, B. Pottin, and O. Tuske, “High Intensity Helium Beam at CEA/Saclay”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-20, pp. 115-115.
[n] T. Y. Chung et al., “Performance of Elliptical Polarization Undulators at TPS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 987-989. doi:10.18429/JACoW-IPAC2014-TUOCB03
[n] B. Faatz, M. Tischer, and P. Vagin, “Influence of Radiation Exposure on the FEL Performance at FLASH”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 488-491. doi:10.18429/JACoW-FEL2019-WEP070
[n] J. S. Kim et al., “Status of FAR-TECH's ECR Ion Source Optimization Modeling”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS078, pp. 1829-1831.
[n] L. Zhao, B. Cluggish, and J. S. Kim, “2D Extension of GEM (The Generalized ECR Ion Source Modeling Code)”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS079, pp. 1832-1834.
[n] C. H. Kuo, Y.-S. Cheng, P. C. Chiu, K. T. Hsu, K. H. Hu, and D. Lee, “FPGA Based Global Orbit Feedback in the Taiwan Light Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1100-1102. doi:10.18429/JACoW-IPAC2015-MOPTY071
[n] P. C. Chiu, K. T. Hsu, K. H. Hu, C. H. Huang, and C.-C. Kuo, “Observation and Suppression of Beam Orbit Drift Due to Path Length Changes and Thermal Effect in TPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2313-2315. doi:10.18429/JACoW-IPAC2018-WEPAL059
[n] B. Cluggish, S. Galkin, and J. S. Kim, “Modeling Ion Extraction from an ECR Ion Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS077, pp. 1826-1828.
[n] H.-W. Glock, J. Knobloch, A. Neumann, and A. Velez, “Industrial X-Ray Tomographie as a Tool for Shape and Integrity Control of SRF Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 725. doi:10.18429/JACoW-SRF2021-THOTEV07
[n] K. Halbach, B. Feinberg, M. I. Green, R. MacGill, J. Milburn, and J. Tanabe, “Hybrid Rare Earth Quadrupole Drift Tube Magnets”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3643-3646.
[n] J. Cao, L. Ma, L. Wang, S. Wang, and Z. Zhao, “A Preliminary Experiment for the Beam Based Calibration of Beam Position Monitors at BEPC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7B10, pp. 1777-1779.
[n] T. Yorita et al., “Study of Extraction and Transport of Intense Highly Charged Ions for 18GHz SC-ECRIS at RCNP”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA031, pp. 145-147.
[n] P. I. Nemytov, Yu. I. Golubenko, N. K. Kuksanov, R. A. Salimov, S. N. Fadeev, and M. E. Veis, “HIGH POWER TRANSISTORS FREQUENCY CONVERTER FOR SUPPLY UP TO 500 KW DC ELECTRON ACCELERATORS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THLO03, pp. XX-XX.
[n] K. Hatanaka et al., “Development Of The Rcnp Cyclotron Cascade”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 125-127.
For LaTeX
Use Complete Form
For BibTeX
References
- B. S. Wang et al., “ALGORITHM AND CIRCUIT TO IMPROVE ZERO-CROSSING STABILITY OF BIPOLAR TPS TRIM COIL POWER SUPPLY”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3206-3208.
- P. Vagin, P. Neumann, and M. Tischer, “Magnetic Measurement Developments for Undulators”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2016-2018.
- G. Huang, J. M. Byrd, L. R. Doolittle, J. W. Staples, and R. B. Wilcox, “Stable Transmission of Radio Frequency Signals on Fiber Links Using Interferometric Delay Sensing”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM081, pp. 372-374.
- R. Gobin, O. Delferriere, F. Harrault, B. Pottin, and O. Tuske, “High Intensity Helium Beam at CEA/Saclay”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOPO-20, pp. 115-115.
- T. Y. Chung et al., “Performance of Elliptical Polarization Undulators at TPS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 987-989.
- B. Faatz, M. Tischer, and P. Vagin, “Influence of Radiation Exposure on the FEL Performance at FLASH”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 488-491.
- J. S. Kim et al., “Status of FAR-TECH's ECR Ion Source Optimization Modeling”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS078, pp. 1829-1831.
- L. Zhao, B. Cluggish, and J. S. Kim, “2D Extension of GEM (The Generalized ECR Ion Source Modeling Code)”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS079, pp. 1832-1834.
- C. H. Kuo, Y.-S. Cheng, P. C. Chiu, K. T. Hsu, K. H. Hu, and D. Lee, “FPGA Based Global Orbit Feedback in the Taiwan Light Source”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1100-1102.
- P. C. Chiu, K. T. Hsu, K. H. Hu, C. H. Huang, and C.-C. Kuo, “Observation and Suppression of Beam Orbit Drift Due to Path Length Changes and Thermal Effect in TPS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2313-2315.
- B. Cluggish, S. Galkin, and J. S. Kim, “Modeling Ion Extraction from an ECR Ion Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS077, pp. 1826-1828.
- H.-W. Glock, J. Knobloch, A. Neumann, and A. Velez, “Industrial X-Ray Tomographie as a Tool for Shape and Integrity Control of SRF Cavities”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 725.
- K. Halbach, B. Feinberg, M. I. Green, R. MacGill, J. Milburn, and J. Tanabe, “Hybrid Rare Earth Quadrupole Drift Tube Magnets”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3643-3646.
- J. Cao, L. Ma, L. Wang, S. Wang, and Z. Zhao, “A Preliminary Experiment for the Beam Based Calibration of Beam Position Monitors at BEPC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP7B10, pp. 1777-1779.
- T. Yorita et al., “Study of Extraction and Transport of Intense Highly Charged Ions for 18GHz SC-ECRIS at RCNP”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA031, pp. 145-147.
- P. I. Nemytov, Yu. I. Golubenko, N. K. Kuksanov, R. A. Salimov, S. N. Fadeev, and M. E. Veis, “HIGH POWER TRANSISTORS FREQUENCY CONVERTER FOR SUPPLY UP TO 500 KW DC ELECTRON ACCELERATORS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THLO03, pp. XX-XX.
- K. Hatanaka et al., “Development Of The Rcnp Cyclotron Cascade”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 125-127.
Back to search