Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Robert-Demolaize, A. Marusic, S. Tepikian, and S. M. White, “Commissioning of a beta Knob for Dynamic IR Correction at RHIC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC061, pp. 1314-1316.
[n] F. M. Bieniosek et al., “Ion Sources and Injectors for HIF Induction Linacs”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOD05, pp. 214-216.
[n] F. Touze and G. Le Meur, “A Non Conforming Finite Element Method for Computing Eigenmodes of Resonant Cavities”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1696-1699.
[n] J. X. Chen, L. Kang, and J. B. Yu, “Research of the Chinese Spallation Neutron Source Stripper Foil”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4562-4564. doi:10.18429/JACoW-IPAC2017-THPVA054
[n] T. Aniel and F. Meot, “Non-linear Tuning and Halo Transport in Beam Expanders”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP074L, pp. 1233-1235.
[n] A. Morgan, A. Amiri, I. Martin, L. Bobb, and V. Zhiltsov, “Design and Prototyping for Diamond-II Stripline Kickers”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 334-338. doi:10.18429/JACoW-IBIC2025-TUPCO01
[n] R. O. Hettel et al., “Ideas for a Future PEP Light Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC023, pp. 2031-2033.
[n] S. He et al., “Mechanical Study of the First Superconducting Half-wave Resonator for Injector II of CADS Project”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB057, pp. 306-308.
[n] F. Alessandria et al., “The TTF Cryosat Design Report”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93G05, pp. XX-XX.
[n] M. Rojak, E. Shurina, Yu. Soloveichik, A. Grudiev, M. Tiunov, and P. Vobly, “MASTAC - New Code for Solving Three-Dimensional Non-linear Magnetostatic Problems”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPB09, pp. 2291-2293.
[n] H. N. Jungwirth, “A Formulation of the Mass of Cyclotron Magnets in Terms of Ion Characteristics and Maximum Field”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I1-13, pp. 325-328.
[n] Y.-M. Shin, N. Barov, and A. T. Green, “Development of a Field-Emission Type S-band RF-Gun System for High Brightness Electron Source Applications”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1856-1859. doi:10.18429/JACoW-IPAC2015-TUPMA010
[n] A. Brandelik et al., “First Operation of a Superconducting Proton Accelerator”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper E01, pp. 93-97.
[n] Q. Ji, J. W. Kwan, B. A. Ludewigt, and M. J. Regis, “Permanent Magnet Microwave-Driven Ion Source for Neutron Generation”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-09, pp. 85-85.
[n] K. W. Fong, C. M. Estes, J. M. Fisher, and R. T. Shelton, “Application Software Structures Enables NIF Operations”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THCT003, pp. XX-XX.
[n] R. S. Livingston, “A Survey of Methods of Accelerating Heavy Ions”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69E01, pp. XX-XX.
[n] G. Hemmie and J. R. Maidment, “DESY III, The New Proton Injector for HERA”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 172-175.
[n] Y.Ohnishi, “UPGRADE PLAN OF KEKB”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper MOACH07, pp. XX-XX.
[n] K. M. Wilson et al., “The Prototype Fundamental Power Coupler for the Spallation Neutron Source Superconducting Cavities: Design and Initial Test Results”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT021, pp. 535-539.
[n] Y. Jongen, M. Lacroix, M. Loiselet, A. Ninane, G. Ryckewaert, and S. Zaremba, “A Two-Cyclotron Concept for the Production of Radioactive Ion Beams”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1620-1623.
[n] J. S. Berg et al., “FFAGs for Muon Acceleration”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB062, pp. 3413-3415.
[n] C. H. A. Hogben, M. Beldishevski, S. Griph, P. J. L. Heesterman, K. Kneupner, and R. M. A. Lucock, “The HTTP 'Black Box' Protocol for Control and Data Acquisition at JET”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP021, pp. 131-133.
[n] R. C. York et al., “The NSCL Coupled Cyclotron Project - Overview and Status”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper K-01, pp. 687-691.
[n] J. Bisognano et al., “Progress Toward the Wisconsin Free Electron Laser”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP176, pp. 2444-2446.
[n] J. Shmoys, B. Cheo, and R. Jones, “Cascaded Transmission Line Model for Global DTL Analysis”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-12, pp. 332-334.
[n] W.L Zhan, “PROGRESS OF THE HEAVY ION RESEARCH FACILITY IN LANZHOU”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18A2, pp. XX-XX.
[n] K. Sato, “DEVELOPMENTS AT RCNP”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18C2, pp. XX-XX.
[n] J. Skelly, C. Gardner, A. Kponou, A. Luccio, and K. Reece, “Generalized Emittance Measurements in a Beam Transport Line”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1473-1476.
[n] J. E. Dusatko, S. Allison, J. Browne, and P. Krejcik, “The LCLS Timing Event System”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM083, pp. 379-383.
[n] R. Nagaoka et al., “Study of Ion-induced Instabilities and Transverse Feedback Performance at SOLEIL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS049, pp. 712-714.
[n] B. Arfin and F. Friedlander, “Study and Design of the NAL Main Ring Accelerator Cavity”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 237-241.
[n] E. Petit, “Progress of the SPIRAL2 Project”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEYA01, pp. 1912-1916.
[n] N. Barov, J. S. Kim, R. H. Miller, and D. J. Newsham, “Novel Acceleration Structure Using Slot Resonance Coupling”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP014, pp. 839-841.
[n] J. Jentzsch, W. Bartmann, M. A. Fraser, R. Ostojic, G. Tranquille, and D. Barna, “Beam Dynamics Studies of the ELENA Electrostatic Transfer Lines in the Presence of Magnetic Stray Fields”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3351-3353. doi:10.18429/JACoW-IPAC2016-THPMB047
[n] E. Fagotti et al., “Operational Experience in PIAVE-ALPI Complex”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper FR-04, pp. 208-212.
[n] T. Lahey, J. Rock, R. Sass, H. Shoaee, and K. Underwood, “An Integrated Enterprise Accelerator Database for the SLC Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP072, pp. XX-XX.
[n] R. Rossmanith, A. Geisler, A. Hobl, and M. Schillo, “A Superconducting Short Period Undulator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPA006, pp. 233-235.
[n] L. O. Dallin and D. Bertwistle, “Magnet Design Considerations for an Ultralow Emittance Canadian Light Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2413-2415. doi:10.18429/JACoW-IPAC2018-WEPMF021
[n] E. R. Gray et al., “Phase Space Cooling and pbarp Colliding Beams of Fermilab”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1854-1857.
[n] R. Bailey et al., “Three Years Operational Experience with LEP”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 63-66.
[n] D. Liu, “Towards User Defined Web Applications in Accelerator Labs”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 843-844. doi:10.18429/JACoW-LINAC2016-THPRC032
[n] J. Steimel, T. Berenc, and C. Rivetta, “Beam Loading Compensation for Slip Stacking”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB032, pp. 3362-3364.
[n] I. E. Campisi et al., “RF Superconducting Properties of Thin Films on Niobium”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3363-3366.
[n] A. I. Ageev, V. M. Efremov, V. A. Kiselev, V. Ya. Pakhomov, S. M. Pesterev, and L. M. Sevryukova, “Field Emission Properties of the SC Alloy (H2B) N2V”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C06, pp. 389-395.
[n] N. P. Abreu et al., “Energy Loss of Coasting Gold Ions and Deutrons in RHIC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP001, pp. 2518-2520.
[n] T. Lavine, “Review of Pulsed RF Power Generation”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 302-307.
[n] M. R. Shubaly, “Ion Source Development and Injector Design for ZEBRA”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper G204, pp. 251-253.
[n] J. E. Allinger, G. T. Danby, J. W. Jackson, I. Polk, and A. Prodell, “High Field Iron Magnets for Operation at Cyrogenic Temperatures”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 728-734.
[n] L. A. Day et al., “Automated Control and Real-Time Data Processing of Wire Scanner/Halo Scraper Measurements”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH040, pp. 1309-1311.
[n] L. Faillace et al., “High Gradient Normal Conducting Radio-Frequency Photoinjector System for Sincrotrone Trieste”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEODS4, pp. 1504-1506.
[n] A. Bernhard et al., “Preparations for Beam Tests of a CLIC Damping Wiggler Prototype at ANKA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME005, pp. 1568-1570.
[n] R. R. Mitchell, M. Cola, G. Ellis, and R. C. Gentzlinger, “Structural Analysis of the APT Superconducting Cavities”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP013, pp. 405-421.
[n] C. M. Celata, A. Faltens, D. L. Judd, L. Smith, and M. G. Tiefenback, “Transverse Combining of Nonrelativistic Beams in a Multiple Beam Induction Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1167-1170.
[n] J. D. Hepburn, B. G. Chidley, M. R. Shubaly, and J. Ungrin, “Design Criteria for High Voltage, High Current Accelerating Columns”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S8-9, pp. 448-452.
[n] M. Riva, B. Esposito, and D. Marocco, “A Novel FPGA-based Digital Approach to Neutron/Gamma-Ray Pulse Acquisition and Discrimination in Scintillators”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_041.
[n] Y. K. Batygin, V. K. Bharadwaj, D. C. Schultz, and J. C. Sheppard, “Design Studies of Positron Collection for the NLC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH056, pp. 3804-3806.
[n] L. Xiao, C.-K. Ng, J. E. Dey, and I. Kourbanis, “Second Harmonic Cavity Design for Project-X Main Injector”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC087, pp. 2417-2419.
[n] M. Acar, J. Boerez, A. Herty, H. Mainaud Durand, A. Marin, and J.-P. Quesnel, “Remote Alignment of Low Beta Quadrupoles with Micrometric Resolution”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD020, pp. 1470-1472.
[n] V. Forte et al., “Beam-Based Waveform Measurements of the CERN PS Injection Kicker”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 603-606. doi:10.18429/JACoW-IPAC2017-MOPIK043
[n] H. Mizuno et al., “RF High Power Tests of the X-Band Windows in the TWR”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-43, pp. 466-468.
[n] G. P. Boicourt and R. A. Jameson, “A Study of the Variation of Maximum Beam Size with Quadrupole Gradient Strength in the FMIT Drift Tube Linac”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3504-3507.
[n] P. Balleyguier, J. Sherman, and T. Zaugg, “Suppression of the 1MHz Beam Current Modulation in the LEDA Proton Source”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4045, pp. 869-871.
[n] B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, and C. P. Welsch, “Conceptual Design of the PERLE Injector”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 743-746. doi:10.18429/JACoW-LINAC2022-THPOJO26
[n] Q. Ji, D. P. Grote, A. R. Lambert, D. Li, T. Schenkel, and J. W. Staples, “Beam Dynamics Studies of H- Beam Chopping in a LEBT for Project X”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO3B04, pp. 546-549.
[n] A. V. Fedotov et al., “Design Aspects of an Electrostatic Electron Cooler for Low-energy RHIC Operation”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP082, pp. 2288-2290.
[n] S. M. Martin and R. D. Hay, “Estimations of Magnetic Field Distributions in Three Dimensions Using a Two Dimensional Computer Program Trimm”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 907-909.
[n] R. W. Bierce, W. R. Fowkes, and J. H. Jasberg, “Window Materials Design and Properties for Use in High Power Klystrons”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 180-185.
[n] R. E. Laxdal et al., “Extraction Exploiting nu;r = 3/2: Optical and Technical Constraints on Performance”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper G-08, pp. 248-251.
[n] J. Brossard, M. Desmons, B. M. Mercier, C. P. Prevost, and R. Roux, “Construction of the Probe Beam Photo-injector of CTF3”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS114, pp. 828-830.
[n] I. Pinayev et al., “Giant Pulse Generation Using Gain Modulator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH111, pp. 2727-2729.
[n] M. Lieuvin and A. R. A. Staff, “S.A.R.A. -- A Low Cost Heavy Ion Accelerator for 10 to 40 MeV/A”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2072-2077.
[n] S. A. Antipov and S. Nagaitsev, “H?®non-Heiles Single Particle Dynamics at IOTA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2508-2511. doi:10.18429/JACoW-IPAC2017-WEOAB1
[n] M. B. James et al., “Update on the High-Current Injector for the Stanford Linear Collider”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2992-2995.
[n] D. Van Winkle, J. Browne, J. D. Fox, T. Mastorides, C. H. Rivetta, and D. Teytelman, “Amplitude Linearizers for PEP-II 1.2 MW Klystrons and LLRF Systems”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH200, pp. 1480-1482.
[n] V. Kamerdzhiev, J. Dietrich, and K. Reimers, “Performance of the Scintillation Profile Monitor in the COSY Synchrotron”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC084, pp. 1201-1202.
[n] R. Giannini and P. Mandrillon, “On the Possibility of Accelerating Multiply Charged Ions in the CERN Synchro-Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper I-07, pp. 609-613.
[n] D. L. Judd et al., “Concepts, Features, and Design of a Sixteen-to-Four Beam Combiner for ILSE”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 968-971.
[n] Y. K. Wu, S. Hartman, and S. F. Mikhailov, “A Physics Based Control System for the Duke Storage Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB033, pp. 2482-2484.
[n] E. Demmel and W. Schmidt, “High Power Klystrons for High Energy Physics Research Applications”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3432-3435.
[n] R. B. Turner and J. Ungrin, “Brazing Techniques and Alloys for Accelerator RF Components”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B15, pp. 77-79.
[n] J. J. Back et al., “Commissioning of the Low Energy Beam Transport of the Front End Test Stand”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC078, pp. 648-650.
[n] S. Gourlay and G. L. Sabbi, “Future Expectations, Limits and Operational Issues for High Field Superconducting Accelerator Dipole Magnets”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE001, pp. 2397-2399.
[n] I. Hsu et al., “The Energy Stabilization for the SLC Scavenger Beam”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH428, pp. 662-664.
[n] M. S. Dmitriyev, K. G. Artamonov, O. A. Ivanov, and M. I. Zhigailova, “Magnetic System With Variable Characteristics for a 2.45 GHz ECRIS”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 310-312. doi:10.18429/JACoW-RuPAC2021-TUPSB38
[n] R. S. Mao et al., “Detectors for Slowly Extracted Ions in HIRFL-CSR”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB21, pp. 211-212.
[n] P. Forck and C. Dorn, “Measurements with a Novel Non-Intercepting Bunch Shape Monitor at the High Current GSI-LINAC”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POM010, pp. XX-XX.
[n] S. Persichelli, M. Migliorati, M. M. Paoluzzi, and B. Salvant, “Impedance Studies for the PS Finemet?« Loaded Longitudinal Damper”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1708-1710. doi:10.18429/JACoW-IPAC2014-TUPRI060
[n] B. Puccio, A. Casta??eda, M. Kwiatkowski, I. Romera, and B. Todd, “The CERN Beam Interlock System: Principle and Operational Experience”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB073, pp. 2866-2868.
[n] W. E. Fischer, “Application of Spallation Neutron Sources”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THYLA001, pp. 114-118.
[n] G. Devanz et al., “Tests of 704 MHz 1MW Power Coupler at Saclay”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO032, pp. 630-633.
[n] E. Tikhomolov, “Visualization of Interlocks with EPICS Database and EDM Embedded Windows”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1066-1069. doi:10.18429/JACoW-ICALEPCS2015-WEPGF154
[n] R. H. Liu, L. Kang, H. Qu, G. Y. Wang, H. J. Wang, and J. S. Zhang, “Study of the Vibration of the AC Dipole and Magnetic Measurement Girder for CSNS/RCS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME023, pp. 2980-2982.
[n] M. Yu et al., “Fabrication and Test of Short Helical Solenoid Model Based on YBCO Tape”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP153, pp. 1118-1120.
[n] A. Farricker, R. M. Jones, and S. Molloy, “Implications of Manufacturing Errors on Higher Order Modes and on Beam Dynamics in the ESS Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 514-517. doi:10.18429/JACoW-IPAC2015-MOPJE083
[n] G. K. Brunton et al., “Shot Rate Improvement Strive for the National Ignition Facility (NIF)”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 56-59. doi:10.18429/JACoW-ICALEPCS2015-MOD3O03
[n] L. H. Chen et al., “Thermal Simulations of a New Target Configuration for Production of Radioactive Nuclide”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI026, pp. 336-338.
[n] S. Barabin, P. Forck, T. Giacomini, D. Liakin, A. Orlov, and V. Skachkov, “DEVELOPMENT OF A PERMANENT MAGNET RESIDUAL GAS PROFILE MONITOR WITH FAST READOUT”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHP36, pp. XX-XX.
[n] D. Newsham, Y. Luo, D. Yu, J. Zeng, and J. B. Rosenzweig, “Development of an X-Band PWT Photoinjector”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH088, pp. 2296-2298.
[n] W. D. Kimura et al., “Progress on STELLA Experiment”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA145, pp. 3722-3724.
[n] A. W. Maschke, J. Brodowski, and E. Meier, “Space Charge Limits in ESQ Transport Systems”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2558-2560.
[n] X. Wang and F. Long, “Study on the Control Technology of Large-load Time Constant Accelerator Magnet Power Supply”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 239-241. doi:10.18429/JACoW-LINAC2018-MOPO116
[n] J. W. McKenzie, D. Angal-Kalinin, J. K. Jones, and B. L. Militsyn, “Design of the Production and Measurement of Ultra-Short Electron Bunches from an S-band RF Photoinjector”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD068, pp. 1560-1562.
[n] A. I. Papash, G. A. Karamysheva, and L. M. Onischenko, “Compact Superconducting Synchrocyclotrons at Magnetic Field Level of up to 10 T for Proton and Carbon Therapy”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS077, pp. 3610-3612.
[n] M. V. Fisher, A. A. Khan, and J. J. Knopp, “Beamline Alignment and Characterization with an Autocollimator”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 62. doi:10.18429/JACoW-MEDSI2020-MOPC05
[n] J. A. Clarke et al., “CLARA - A Proposed New FEL Test Facility for the UK”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP066, pp. 1750-1752.
[n] W. J. Corbett, A. M. Kiss, M. J. Boland, and C. L. Li, “Characterization of Visible Synchrotron Radiation Polarization at SPEAR3”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1240-1242. doi:10.18429/JACoW-IPAC2015-MOPWI035
[n] E. J. S. Franklin and J. G. de Villiers, “Ion Spectra Identification Software for the ECR Ion Source at NAC”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XI-07, pp. 660-663.
[n] A. Seryi et al., “Vibrational Stability of GLC/NLC Linear Collider: Status and Ramp;D Plans”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT138, pp. 863-865.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Robert-Demolaize, A. Marusic, S. Tepikian, and S. M. White, “Commissioning of a beta Knob for Dynamic IR Correction at RHIC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC061, pp. 1314-1316.
- F. M. Bieniosek et al., “Ion Sources and Injectors for HIF Induction Linacs”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOD05, pp. 214-216.
- F. Touze and G. Le Meur, “A Non Conforming Finite Element Method for Computing Eigenmodes of Resonant Cavities”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1696-1699.
- J. X. Chen, L. Kang, and J. B. Yu, “Research of the Chinese Spallation Neutron Source Stripper Foil”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4562-4564.
- T. Aniel and F. Meot, “Non-linear Tuning and Halo Transport in Beam Expanders”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP074L, pp. 1233-1235.
- A. Morgan, A. Amiri, I. Martin, L. Bobb, and V. Zhiltsov, “Design and Prototyping for Diamond-II Stripline Kickers”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 334-338.
- R. O. Hettel et al., “Ideas for a Future PEP Light Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC023, pp. 2031-2033.
- S. He et al., “Mechanical Study of the First Superconducting Half-wave Resonator for Injector II of CADS Project”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB057, pp. 306-308.
- F. Alessandria et al., “The TTF Cryosat Design Report”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93G05, pp. XX-XX.
- M. Rojak, E. Shurina, Yu. Soloveichik, A. Grudiev, M. Tiunov, and P. Vobly, “MASTAC - New Code for Solving Three-Dimensional Non-linear Magnetostatic Problems”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPB09, pp. 2291-2293.
- H. N. Jungwirth, “A Formulation of the Mass of Cyclotron Magnets in Terms of Ion Characteristics and Maximum Field”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I1-13, pp. 325-328.
- Y.-M. Shin, N. Barov, and A. T. Green, “Development of a Field-Emission Type S-band RF-Gun System for High Brightness Electron Source Applications”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1856-1859.
- A. Brandelik et al., “First Operation of a Superconducting Proton Accelerator”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper E01, pp. 93-97.
- Q. Ji, J. W. Kwan, B. A. Ludewigt, and M. J. Regis, “Permanent Magnet Microwave-Driven Ion Source for Neutron Generation”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOPO-09, pp. 85-85.
- K. W. Fong, C. M. Estes, J. M. Fisher, and R. T. Shelton, “Application Software Structures Enables NIF Operations”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THCT003, pp. XX-XX.
- R. S. Livingston, “A Survey of Methods of Accelerating Heavy Ions”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69E01, pp. XX-XX.
- G. Hemmie and J. R. Maidment, “DESY III, The New Proton Injector for HERA”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 172-175.
- Y.Ohnishi, “UPGRADE PLAN OF KEKB”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper MOACH07, pp. XX-XX.
- K. M. Wilson et al., “The Prototype Fundamental Power Coupler for the Spallation Neutron Source Superconducting Cavities: Design and Initial Test Results”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT021, pp. 535-539.
- Y. Jongen, M. Lacroix, M. Loiselet, A. Ninane, G. Ryckewaert, and S. Zaremba, “A Two-Cyclotron Concept for the Production of Radioactive Ion Beams”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1620-1623.
- J. S. Berg et al., “FFAGs for Muon Acceleration”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB062, pp. 3413-3415.
- C. H. A. Hogben, M. Beldishevski, S. Griph, P. J. L. Heesterman, K. Kneupner, and R. M. A. Lucock, “The HTTP 'Black Box' Protocol for Control and Data Acquisition at JET”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUP021, pp. 131-133.
- R. C. York et al., “The NSCL Coupled Cyclotron Project - Overview and Status”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper K-01, pp. 687-691.
- J. Bisognano et al., “Progress Toward the Wisconsin Free Electron Laser”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP176, pp. 2444-2446.
- J. Shmoys, B. Cheo, and R. Jones, “Cascaded Transmission Line Model for Global DTL Analysis”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-12, pp. 332-334.
- W.L Zhan, “PROGRESS OF THE HEAVY ION RESEARCH FACILITY IN LANZHOU”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18A2, pp. XX-XX.
- K. Sato, “DEVELOPMENTS AT RCNP”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18C2, pp. XX-XX.
- J. Skelly, C. Gardner, A. Kponou, A. Luccio, and K. Reece, “Generalized Emittance Measurements in a Beam Transport Line”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1473-1476.
- J. E. Dusatko, S. Allison, J. Browne, and P. Krejcik, “The LCLS Timing Event System”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM083, pp. 379-383.
- R. Nagaoka et al., “Study of Ion-induced Instabilities and Transverse Feedback Performance at SOLEIL”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS049, pp. 712-714.
- B. Arfin and F. Friedlander, “Study and Design of the NAL Main Ring Accelerator Cavity”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 237-241.
- E. Petit, “Progress of the SPIRAL2 Project”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEYA01, pp. 1912-1916.
- N. Barov, J. S. Kim, R. H. Miller, and D. J. Newsham, “Novel Acceleration Structure Using Slot Resonance Coupling”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP014, pp. 839-841.
- J. Jentzsch, W. Bartmann, M. A. Fraser, R. Ostojic, G. Tranquille, and D. Barna, “Beam Dynamics Studies of the ELENA Electrostatic Transfer Lines in the Presence of Magnetic Stray Fields”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3351-3353.
- E. Fagotti et al., “Operational Experience in PIAVE-ALPI Complex”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper FR-04, pp. 208-212.
- T. Lahey, J. Rock, R. Sass, H. Shoaee, and K. Underwood, “An Integrated Enterprise Accelerator Database for the SLC Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP072, pp. XX-XX.
- R. Rossmanith, A. Geisler, A. Hobl, and M. Schillo, “A Superconducting Short Period Undulator”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOPA006, pp. 233-235.
- L. O. Dallin and D. Bertwistle, “Magnet Design Considerations for an Ultralow Emittance Canadian Light Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2413-2415.
- E. R. Gray et al., “Phase Space Cooling and pbarp Colliding Beams of Fermilab”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1854-1857.
- R. Bailey et al., “Three Years Operational Experience with LEP”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 63-66.
- D. Liu, “Towards User Defined Web Applications in Accelerator Labs”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 843-844.
- J. Steimel, T. Berenc, and C. Rivetta, “Beam Loading Compensation for Slip Stacking”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB032, pp. 3362-3364.
- I. E. Campisi et al., “RF Superconducting Properties of Thin Films on Niobium”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3363-3366.
- A. I. Ageev, V. M. Efremov, V. A. Kiselev, V. Ya. Pakhomov, S. M. Pesterev, and L. M. Sevryukova, “Field Emission Properties of the SC Alloy (H2B) N2V”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95C06, pp. 389-395.
- N. P. Abreu et al., “Energy Loss of Coasting Gold Ions and Deutrons in RHIC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP001, pp. 2518-2520.
- T. Lavine, “Review of Pulsed RF Power Generation”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 302-307.
- M. R. Shubaly, “Ion Source Development and Injector Design for ZEBRA”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper G204, pp. 251-253.
- J. E. Allinger, G. T. Danby, J. W. Jackson, I. Polk, and A. Prodell, “High Field Iron Magnets for Operation at Cyrogenic Temperatures”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 728-734.
- L. A. Day et al., “Automated Control and Real-Time Data Processing of Wire Scanner/Halo Scraper Measurements”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH040, pp. 1309-1311.
- L. Faillace et al., “High Gradient Normal Conducting Radio-Frequency Photoinjector System for Sincrotrone Trieste”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEODS4, pp. 1504-1506.
- A. Bernhard et al., “Preparations for Beam Tests of a CLIC Damping Wiggler Prototype at ANKA”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME005, pp. 1568-1570.
- R. R. Mitchell, M. Cola, G. Ellis, and R. C. Gentzlinger, “Structural Analysis of the APT Superconducting Cavities”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP013, pp. 405-421.
- C. M. Celata, A. Faltens, D. L. Judd, L. Smith, and M. G. Tiefenback, “Transverse Combining of Nonrelativistic Beams in a Multiple Beam Induction Linac”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1167-1170.
- J. D. Hepburn, B. G. Chidley, M. R. Shubaly, and J. Ungrin, “Design Criteria for High Voltage, High Current Accelerating Columns”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S8-9, pp. 448-452.
- M. Riva, B. Esposito, and D. Marocco, “A Novel FPGA-based Digital Approach to Neutron/Gamma-Ray Pulse Acquisition and Discrimination in Scintillators”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_041.
- Y. K. Batygin, V. K. Bharadwaj, D. C. Schultz, and J. C. Sheppard, “Design Studies of Positron Collection for the NLC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH056, pp. 3804-3806.
- L. Xiao, C.-K. Ng, J. E. Dey, and I. Kourbanis, “Second Harmonic Cavity Design for Project-X Main Injector”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC087, pp. 2417-2419.
- M. Acar, J. Boerez, A. Herty, H. Mainaud Durand, A. Marin, and J.-P. Quesnel, “Remote Alignment of Low Beta Quadrupoles with Micrometric Resolution”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD020, pp. 1470-1472.
- V. Forte et al., “Beam-Based Waveform Measurements of the CERN PS Injection Kicker”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 603-606.
- H. Mizuno et al., “RF High Power Tests of the X-Band Windows in the TWR”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-43, pp. 466-468.
- G. P. Boicourt and R. A. Jameson, “A Study of the Variation of Maximum Beam Size with Quadrupole Gradient Strength in the FMIT Drift Tube Linac”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3504-3507.
- P. Balleyguier, J. Sherman, and T. Zaugg, “Suppression of the 1MHz Beam Current Modulation in the LEDA Proton Source”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4045, pp. 869-871.
- B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, and C. P. Welsch, “Conceptual Design of the PERLE Injector”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 743-746.
- Q. Ji, D. P. Grote, A. R. Lambert, D. Li, T. Schenkel, and J. W. Staples, “Beam Dynamics Studies of H- Beam Chopping in a LEBT for Project X”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper THO3B04, pp. 546-549.
- A. V. Fedotov et al., “Design Aspects of an Electrostatic Electron Cooler for Low-energy RHIC Operation”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP082, pp. 2288-2290.
- S. M. Martin and R. D. Hay, “Estimations of Magnetic Field Distributions in Three Dimensions Using a Two Dimensional Computer Program Trimm”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 907-909.
- R. W. Bierce, W. R. Fowkes, and J. H. Jasberg, “Window Materials Design and Properties for Use in High Power Klystrons”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 180-185.
- R. E. Laxdal et al., “Extraction Exploiting nu;r = 3/2: Optical and Technical Constraints on Performance”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper G-08, pp. 248-251.
- J. Brossard, M. Desmons, B. M. Mercier, C. P. Prevost, and R. Roux, “Construction of the Probe Beam Photo-injector of CTF3”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS114, pp. 828-830.
- I. Pinayev et al., “Giant Pulse Generation Using Gain Modulator”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH111, pp. 2727-2729.
- M. Lieuvin and A. R. A. Staff, “S.A.R.A. -- A Low Cost Heavy Ion Accelerator for 10 to 40 MeV/A”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2072-2077.
- S. A. Antipov and S. Nagaitsev, “H?®non-Heiles Single Particle Dynamics at IOTA”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2508-2511.
- M. B. James et al., “Update on the High-Current Injector for the Stanford Linear Collider”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2992-2995.
- D. Van Winkle, J. Browne, J. D. Fox, T. Mastorides, C. H. Rivetta, and D. Teytelman, “Amplitude Linearizers for PEP-II 1.2 MW Klystrons and LLRF Systems”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH200, pp. 1480-1482.
- V. Kamerdzhiev, J. Dietrich, and K. Reimers, “Performance of the Scintillation Profile Monitor in the COSY Synchrotron”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC084, pp. 1201-1202.
- R. Giannini and P. Mandrillon, “On the Possibility of Accelerating Multiply Charged Ions in the CERN Synchro-Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper I-07, pp. 609-613.
- D. L. Judd et al., “Concepts, Features, and Design of a Sixteen-to-Four Beam Combiner for ILSE”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 968-971.
- Y. K. Wu, S. Hartman, and S. F. Mikhailov, “A Physics Based Control System for the Duke Storage Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB033, pp. 2482-2484.
- E. Demmel and W. Schmidt, “High Power Klystrons for High Energy Physics Research Applications”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3432-3435.
- R. B. Turner and J. Ungrin, “Brazing Techniques and Alloys for Accelerator RF Components”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B15, pp. 77-79.
- J. J. Back et al., “Commissioning of the Low Energy Beam Transport of the Front End Test Stand”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC078, pp. 648-650.
- S. Gourlay and G. L. Sabbi, “Future Expectations, Limits and Operational Issues for High Field Superconducting Accelerator Dipole Magnets”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE001, pp. 2397-2399.
- I. Hsu et al., “The Energy Stabilization for the SLC Scavenger Beam”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH428, pp. 662-664.
- M. S. Dmitriyev, K. G. Artamonov, O. A. Ivanov, and M. I. Zhigailova, “Magnetic System With Variable Characteristics for a 2.45 GHz ECRIS”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 310-312.
- R. S. Mao et al., “Detectors for Slowly Extracted Ions in HIRFL-CSR”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPB21, pp. 211-212.
- P. Forck and C. Dorn, “Measurements with a Novel Non-Intercepting Bunch Shape Monitor at the High Current GSI-LINAC”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POM010, pp. XX-XX.
- S. Persichelli, M. Migliorati, M. M. Paoluzzi, and B. Salvant, “Impedance Studies for the PS Finemet?« Loaded Longitudinal Damper”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1708-1710.
- B. Puccio, A. Casta??eda, M. Kwiatkowski, I. Romera, and B. Todd, “The CERN Beam Interlock System: Principle and Operational Experience”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB073, pp. 2866-2868.
- W. E. Fischer, “Application of Spallation Neutron Sources”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THYLA001, pp. 114-118.
- G. Devanz et al., “Tests of 704 MHz 1MW Power Coupler at Saclay”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO032, pp. 630-633.
- E. Tikhomolov, “Visualization of Interlocks with EPICS Database and EDM Embedded Windows”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1066-1069.
- R. H. Liu, L. Kang, H. Qu, G. Y. Wang, H. J. Wang, and J. S. Zhang, “Study of the Vibration of the AC Dipole and Magnetic Measurement Girder for CSNS/RCS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME023, pp. 2980-2982.
- M. Yu et al., “Fabrication and Test of Short Helical Solenoid Model Based on YBCO Tape”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP153, pp. 1118-1120.
- A. Farricker, R. M. Jones, and S. Molloy, “Implications of Manufacturing Errors on Higher Order Modes and on Beam Dynamics in the ESS Linac”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 514-517.
- G. K. Brunton et al., “Shot Rate Improvement Strive for the National Ignition Facility (NIF)”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 56-59.
- L. H. Chen et al., “Thermal Simulations of a New Target Configuration for Production of Radioactive Nuclide”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI026, pp. 336-338.
- S. Barabin, P. Forck, T. Giacomini, D. Liakin, A. Orlov, and V. Skachkov, “DEVELOPMENT OF A PERMANENT MAGNET RESIDUAL GAS PROFILE MONITOR WITH FAST READOUT”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WEHP36, pp. XX-XX.
- D. Newsham, Y. Luo, D. Yu, J. Zeng, and J. B. Rosenzweig, “Development of an X-Band PWT Photoinjector”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH088, pp. 2296-2298.
- W. D. Kimura et al., “Progress on STELLA Experiment”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA145, pp. 3722-3724.
- A. W. Maschke, J. Brodowski, and E. Meier, “Space Charge Limits in ESQ Transport Systems”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2558-2560.
- X. Wang and F. Long, “Study on the Control Technology of Large-load Time Constant Accelerator Magnet Power Supply”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 239-241.
- J. W. McKenzie, D. Angal-Kalinin, J. K. Jones, and B. L. Militsyn, “Design of the Production and Measurement of Ultra-Short Electron Bunches from an S-band RF Photoinjector”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD068, pp. 1560-1562.
- A. I. Papash, G. A. Karamysheva, and L. M. Onischenko, “Compact Superconducting Synchrocyclotrons at Magnetic Field Level of up to 10 T for Proton and Carbon Therapy”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS077, pp. 3610-3612.
- M. V. Fisher, A. A. Khan, and J. J. Knopp, “Beamline Alignment and Characterization with an Autocollimator”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 62.
- J. A. Clarke et al., “CLARA - A Proposed New FEL Test Facility for the UK”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP066, pp. 1750-1752.
- W. J. Corbett, A. M. Kiss, M. J. Boland, and C. L. Li, “Characterization of Visible Synchrotron Radiation Polarization at SPEAR3”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1240-1242.
- E. J. S. Franklin and J. G. de Villiers, “Ion Spectra Identification Software for the ECR Ion Source at NAC”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XI-07, pp. 660-663.
- A. Seryi et al., “Vibrational Stability of GLC/NLC Linear Collider: Status and Ramp;D Plans”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT138, pp. 863-865.
Back to search