JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	R. Miyamoto et al., “ESS Low Energy Beam Transport Tuning During the First Beam Commissioning Stage”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1046-1049. doi:10.18429/JACoW-IPAC2019-MOPTS084
[n]	T. H. Martin, “Design and Performance of the Sandia Laboratories Hermes II Flash X-Ray Generator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 59-64. 
[n]	Y. Shimosaki et al., “Design Study of High Brilliant Optics at the SPring-8 Storage Ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 283-285. doi:10.18429/JACoW-IPAC2014-MOPRO083
[n]	S. M. Janssens et al., “Stabilization and Positioning of CLIC Quadrupole Magnets with sub-Nanometre Resolution”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOMMU005, pp. 74-77. 
[n]	H.-P. Chang, P. J. Chou, C.-C. Kuo, G.-H. Luo, H.-J. Tsai, and M.-H. Wang, “Nonlinear Beam Dynamics of TPS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS063, pp. 3430-3432. 
[n]	C.-C. Kuo et al., “Design of Taiwan Future Synchrotron Light Source”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS068, pp. 3445-3447. 
[n]	B. E. Bolling and N. Milas, “DC Beam Space-Charge Modeling for OpenXAL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3177-3180. doi:10.18429/JACoW-IPAC2019-WEPTS037
[n]	T. H. Martin, “A Nominal One-Megavolt, Pulsed Power Generator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 104-106. 
[n]	J.-C. Huang, C.-S. Yang, P.-S. Chuang, H. Kitamura, and C.-L. Chen, “Cryogenic permanent magnet undulator at high beam currents”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3794-3796. doi:10.18429/JACoW-IPAC2024-THPS26
[n]	G.-H. Luo et al., “Feasibility Study of Constant Current Operation at TLS Storage Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF046, pp. 2380-2382. 
[n]	J.-C. Jan, F.-Y. Lin, Y.-L. Chu, J.-C. Huang, and C.-K. Yang, “Optimizing the magnetic circuit of HTSU through REBCO tape selection”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2895-2899. doi:10.18429/JACoW-IPAC2024-WEPS81
[n]	N. Eddy, J. L. Crisp, and M. Hu, “Measurements and Analysis of Beam Transfer Functions in the Fermilab Recycler Ring Using the Transverse Digital Damper System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC117, pp. 3254-3256. 
[n]	Y. B. Leng, Z. C. Chen, L. W. Lai, Y. B. Yan, and Y. Yang, “Bunch by Bunch DBPM Processor Development and Preliminary Experiment in SSRF”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 984-986. doi:10.18429/JACoW-IPAC2015-MOPTY022
[n]	K. Schulte-Urlichs, D. Ondreka, K. Thoma, M. Kirk, and P. Spiller, “GSI electron lens for space charge compensation”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3186-3189. doi:10.18429/JACoW-IPAC2024-THPC70
[n]	I. C. Sheng, J.-R. Chen, Y. T. Cheng, G.-Y. Hsiung, C. K. Kuan, and C. Y. Yang, “Design of TPS Crotch Absorber”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA079, pp. 1506-1508. 
[n]	C.-W. Chen, H. Chen, and J.-C. Huang, “Pulsed wire magnetic field measurements for an in-vacuum undulator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1236-1239. doi:10.18429/JACoW-IPAC2023-MOPM111
[n]	S. Gerstl et al., “Beam Heat Load Measurements with COLDDIAG at the Diamond Light Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA006, pp. 2135-2137. 
[n]	L. W. Lai and Y. B. Leng, “High-Speed Beam Signal Processor for SHINE”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 283-284. doi:10.18429/JACoW-IBIC2019-TUPP004
[n]	T. H. Martin, “The Hydra Electron Beam Generator”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 289-294. 
[n]	C.-C. Kuo et al., “Vertical Beam Size Control in TLS and TPS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS067, pp. 3442-3444. 
[n]	C.-K. Yang, H.-H. Chen, C.-W. Chen, Y.-Y. Hsu, and F.-Y. Lin, “Kicker magnets for fast-switching elliptical polarized undulators beamline of the TPS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB028, unpublished. 
[n]	R. J. Raatikainen, K. Osterberg, T. O. Niinikoski, and G. Riddone, “Progress on Modelling of the Thermo-Mechanical Behavior of the CLIC Two-Beam Module”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC018, pp. 1033-1035. 
[n]	H. C. Chen et al., “Magnet AC Analysis of a Taiwan Light Source Booster”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2977-2979. doi:10.18429/JACoW-IPAC2014-THPRO049
[n]	Y. B. Leng, Y. B. Yan, L. Y. Yu, and W. M. Zhou, “Data Acquisition for SSRF Ring Bunch Charge Monitor”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE034, pp. 1047-1049. 
[n]	H.-J. Tsai, C. C. Chiang, P. J. Chou, and C.-C. Kuo, “Top-Up Safety Simulations for the TPS Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS073, pp. 1707-1709. 
[n]	G. Kourkafas et al., “The Effect of Space Charge Along the Tomography Section at PITZ”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF22, pp. 255-258. 
[n]	F. Bakkali Taheri et al., “Experimental and Theoretical Studies of the Properties of Coherent Smith-Purcell Radiation”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 344-346. doi:10.18429/JACoW-IPAC2016-MOPMR041
[n]	T. Muto et al., “Development of the Non-invasive Beam-size Monitor using ODR”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THOALH02, pp. 256-258. 
[n]	R. De Maria and S. D. Fartoukh, “A Proposal for the Optics and Layout of the HL-LHC with Crab-cavities”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPZ013, pp. 3711-3713. 
[n]	V. Karataev et al., “Development of Optical Diffraction Radiation Beam Size Diagnostics at KEK Accelerator Test Facility”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT067, pp. 2646-2648. 
[n]	Z. Liu, T. Russo, R. C. Webber, Y. Yamazaki, and Y. Zhang, “Beam Loss Monitor System for Low-Energy Heavy-Ion FRIB Accelerators”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC46, pp. 186-188. 
[n]	Y.-L. Chu et al., “Design of permanent dipole magnet in transport line for TPS”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1537-1539. doi:10.18429/JACoW-IPAC2024-TUPR51
[n]	L. G. Sukhikh et al., “FEASIBILITY OF PRE-BUNCHED FEL BASED ON COHERENT DIFFRACTION RADIATION”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUBPH02, pp. XX-XX. 
[n]	L. Groening, S. Appel, L. H. J. Bozyk, Y. El Hayek, M. T. Maier, and C. Xiao, “Demonstration of Flat Ion Beam Creation and Injection into a Synchrotron”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 153-155. doi:10.18429/JACoW-IPAC2015-MOPWA026
[n]	I. P. S. Martin, C. A. Thomas, and R. Bartolini, “Modelling the Steady-state CSR Emission in Low Alpha Mode at the Diamond Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP031, pp. 1677-1679. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search