Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Myneni and M. Hutton, “SRF Technology-Past, Present and Future Options”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP130, pp. 865-867.
[n] V. Talanov and M. Wohlmuther, “Numerical and Experimental Study for the Characterization of the Spallation Target Performance of the Ultracold Neutron Source at the Paul Scherrer Institut”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO085, pp. 3960-3962.
[n] M. Wiseman, C. K. Sinclair, R. Whitney, M. Zarecky, and R. Vetterlein, “High Power Electron Beam Dumps at CEBAF”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P066, pp. 3761-3763.
[n] S. Haghtalab, F. Abbasi, F. Ghasemi, M. Jafarzadeh, and M. Lamehi, “Basic Design of Control System for IPM Linear Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4082-4084. doi:10.18429/JACoW-IPAC2016-THPOW060
[n] P. A. Bong and E. Carrone, “Linac Coherent Light Source Personnel Protection System Architecture”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP107, pp. XX-XX.
[n] M. Inoue, V. Kapin, and A. Noda, “Design Study of a Multiple-Beam RFQ Version of a High-Current Linac Injector for a Neutron Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP18C, pp. 725-727.
[n] R. Schmidt, T. Spickermann, and K. Wittenburg, “Radiation Dose for Equipment in the LHC Arcs”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP22H, pp. 2301-2303.
[n] D. F. A. Winters et al., “Laser Cooling taken to the Extreme at the FAIR SIS100”, presented at the COOL2023, Montreux, Switzerland, Oct. 2023, paper TUPPM2R2, unpublished.
[n] S. A. Gavrilov, A. Feschenko, P. I. Reinhardt-Nickoulin, and I. V. Vasilyev, “Analysis of Measurement Errors of INR Linac Ionization Beam Cross Section Monitor”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF16, pp. 535-538.
[n] G. V. Trubnikov et al., “Status of the NICA Project at JINR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1003-1005. doi:10.18429/JACoW-IPAC2014-TUPRO005
[n] Y. Li, J. V. Conway, X. Liu, and M. A. Palmer, “Electron Cloud Diagnostic Chambers with Various EC-suppression Coatings”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI088, pp. 3496-3498.
[n] F. J. Decker, R. Pennacchi, R. Stege, and J. Turner, “Characterizing Transverse Beam Jitter in the SLC Linac”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP13H, pp. 457-459.
[n] R. A. Legg et al., “Status of the Wisconsin SRF Gun”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP045, pp. 661-663.
[n] M. Vanwelde, C. Hernalsteens, E. Ramoisiaux, E. Gnacadja, N. Pauly, and R. Tesse, “Conceptual lattice design for vertical fixed field medical accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5095-5098. doi:10.18429/JACoW-IPAC2023-THPM093
[n] L. X. Li et al., “Production of intense pulsed highly charged ions beams with high performance superconducting ECR ion source”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper WEP1PG003, unpublished.
[n] A. L??deke, “SLS Operation Management: Methods and Tools”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS143, pp. 2715-2717.
[n] J.-H. Jang, Y.-S. Cho, H. S. Kim, H.-J. Kwon, and Y. Y. Lee, “Physics Design of the PEFP RCS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP069, pp. 1448-1450.
[n] T. Weiland, “Design Study for a 500 GeV Linear Collider”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper FR102, pp. 792-796.
[n] L. Faillace et al., “High-power Tests of an Ultra-high Gradient Compact S-band (HGS) Accelerating Structure”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI088, pp. 2902-2904.
[n] Z. Liu, Z. Q. He, S. M. Lidia, D. Liu, and Q. Zhao, “Optimization of Beam Loss Monitor Network for Fault Modes”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1356-1358. doi:10.18429/JACoW-IPAC2015-TUAC3
[n] K. W. Shepard and M. Kedzie, “Low and Medium Velocity Cavity Development for the RIA Driver Linac”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT018, pp. XX-XX.
[n] K. Papke, U. van Rienen, and F. Gerigk, “HOM Couplers for CERN SPL Cavities”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP064, pp. 1066-1068.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Myneni and M. Hutton, “SRF Technology-Past, Present and Future Options”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP130, pp. 865-867.
- V. Talanov and M. Wohlmuther, “Numerical and Experimental Study for the Characterization of the Spallation Target Performance of the Ultracold Neutron Source at the Paul Scherrer Institut”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO085, pp. 3960-3962.
- M. Wiseman, C. K. Sinclair, R. Whitney, M. Zarecky, and R. Vetterlein, “High Power Electron Beam Dumps at CEBAF”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P066, pp. 3761-3763.
- S. Haghtalab, F. Abbasi, F. Ghasemi, M. Jafarzadeh, and M. Lamehi, “Basic Design of Control System for IPM Linear Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4082-4084.
- P. A. Bong and E. Carrone, “Linac Coherent Light Source Personnel Protection System Architecture”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP107, pp. XX-XX.
- M. Inoue, V. Kapin, and A. Noda, “Design Study of a Multiple-Beam RFQ Version of a High-Current Linac Injector for a Neutron Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP18C, pp. 725-727.
- R. Schmidt, T. Spickermann, and K. Wittenburg, “Radiation Dose for Equipment in the LHC Arcs”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP22H, pp. 2301-2303.
- D. F. A. Winters et al., “Laser Cooling taken to the Extreme at the FAIR SIS100”, presented at the 14th International Workshop on Beam Cooling and Related Topics (COOL2023), Montreux, Switzerland, Oct. 2023, paper TUPPM2R2, unpublished.
- S. A. Gavrilov, A. Feschenko, P. I. Reinhardt-Nickoulin, and I. V. Vasilyev, “Analysis of Measurement Errors of INR Linac Ionization Beam Cross Section Monitor”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPF16, pp. 535-538.
- G. V. Trubnikov et al., “Status of the NICA Project at JINR”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1003-1005.
- Y. Li, J. V. Conway, X. Liu, and M. A. Palmer, “Electron Cloud Diagnostic Chambers with Various EC-suppression Coatings”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI088, pp. 3496-3498.
- F. J. Decker, R. Pennacchi, R. Stege, and J. Turner, “Characterizing Transverse Beam Jitter in the SLC Linac”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP13H, pp. 457-459.
- R. A. Legg et al., “Status of the Wisconsin SRF Gun”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP045, pp. 661-663.
- M. Vanwelde, C. Hernalsteens, E. Ramoisiaux, E. Gnacadja, N. Pauly, and R. Tesse, “Conceptual lattice design for vertical fixed field medical accelerators”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM093, pp. 5095-5098.
- L. X. Li et al., “Production of intense pulsed highly charged ions beams with high performance superconducting ECR ion source”, presented at the 25th International Workshop on ECR Ion Sources (ECRIS'22), Ahmedabad, India, Oct. 2022, paper WEP1PG003, unpublished.
- A. L??deke, “SLS Operation Management: Methods and Tools”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS143, pp. 2715-2717.
- J.-H. Jang, Y.-S. Cho, H. S. Kim, H.-J. Kwon, and Y. Y. Lee, “Physics Design of the PEFP RCS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP069, pp. 1448-1450.
- T. Weiland, “Design Study for a 500 GeV Linear Collider”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper FR102, pp. 792-796.
- L. Faillace et al., “High-power Tests of an Ultra-high Gradient Compact S-band (HGS) Accelerating Structure”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI088, pp. 2902-2904.
- Z. Liu, Z. Q. He, S. M. Lidia, D. Liu, and Q. Zhao, “Optimization of Beam Loss Monitor Network for Fault Modes”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1356-1358.
- K. W. Shepard and M. Kedzie, “Low and Medium Velocity Cavity Development for the RIA Driver Linac”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT018, pp. XX-XX.
- K. Papke, U. van Rienen, and F. Gerigk, “HOM Couplers for CERN SPL Cavities”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP064, pp. 1066-1068.
Back to search