JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	A. M. M. Todd et al., “The Double Eagle Space Experiment (DESE) Beamline Design”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-46, pp. 163-165. 
[n]	K. R. Crandall, R. S. Mills, and T. P. Wangler, “Radio-Frequency Quadrupole Vane-Tip Geometries”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3554-3557. 
[n]	R. McKenzie-Wilson, “Tuning System for Capacitively Loaded lambda4 Accelerating Cavity”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2786-2788. 
[n]	V. S. Kashikhin et al., “Design of Helical Solenoid Combined with RF Cavity”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB051, pp. 382-384. 
[n]	W. D. Kimura et al., “First Demonstration of Staged Laser Acceleration”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPC002, pp. 103-107. 
[n]	M. Borland, T. G. Berenc, R. R. Lindberg, and A. Xiao, “Tracking Studies of a Higher-Harmonic Bunch-Lengthening Cavity for the Advanced Photon Source Upgrade”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 543-545. doi:10.18429/JACoW-IPAC2015-MOPMA007
[n]	N. Banerjee, A. Romanov, A. Valishev, G. Stancari, J. Wieland, and N. Kuklev, “Experimental verification of integrability in a Danilov-Nagaitsev lattice using machine learning”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 878-881. doi:10.18429/JACoW-IPAC2024-MOPS67
[n]	F. Perez et al., “ALBA II accelerator upgrade project status”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 706-709. doi:10.18429/JACoW-IPAC2025-MOPS043
[n]	A. McElderry, B. Billett, J. A. Carter, and K. J. Wakefield, “Final Design of NEG-Coated Aluminum Vacuum Chambers & Stainless Steel Keyhole Vacuum Chambers for the APS-U Storage Ring”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 480-482. doi:10.18429/JACoW-NAPAC2019-TUPLS12
[n]	R. E. Hester et al., “The Experimental Test Accelerator (ETA)”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4180-4183. 
[n]	T. Shrey et al., “RHIC Au-Au operation at 100 GeV in Run 23”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 48-50. doi:10.18429/JACoW-IPAC2024-MOPC07
[n]	G. B. Christian et al., “An FPGA-based Bunch-by-Bunch Position and Angle Feedback System at ATF2”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD80, pp. 233-235. 
[n]	D. A. Swenson, “Low-Beta Linac Structures”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S3-1, pp. 129-137. 
[n]	D. E. Lobb and P. A. Reeve, “A Proposed Superferric Combined Function Magnet”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B18, pp. 85-88. 
[n]	W. Roybal, D. C. Nguyen, W. Reass, D. Rees, P. J. Tallerico, and P. A. Torrez, “A 700 MHZ, 1 MW CW RF System for a FEL 100mA RF Photoinjector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT036, pp. 2413-2415. 
[n]	G. R. Murdoch et al., “An Overview of the SNS Accelerator Mechanical Engineering”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS140, pp. 1831-1833. 
[n]	R. -S Chen, C.-L. Cho, C.-C. Chu, I. Hsu, and C.-I. Yu, “Design Study of Laser Compton Scattering with Relativistic Electron to Measure the Electron Beam Energy”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1740-1743. 
[n]	K.-H. Park et al., “Precision Field Mapping System for Cyclotron Magnet”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT095, pp. 1378-1380. 
[n]	A. N. Goland, D. M. Parkin, C. L. Snead Jr, and R. B. Theus, “Use of Li (d,n) Neutrons for Simulation of Radiation Effects in Fusion Reactors”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1776-1780. 
[n]	J. Gao et al., “ILC 1.3 GHz Superconducting RF Technology Development Program at IHEP”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP038, pp. 906-908. 
[n]	R. Connolly et al., “Laser Beam-Profile Monitor Development at BNL for SNS”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO204, pp. 21-25. 
[n]	N. Chaisueb and S. Rimjaem, “Simulation and Optimization of Injector System for the Pre-bunched THz FEL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 654-657. doi:10.18429/JACoW-FEL2019-THP031
[n]	S. J. Bean et al., “A Novel Vacuum Chamber Design for the APS Upgrade of the 26-ID Nanoprobe”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 296. doi:10.18429/JACoW-MEDSI2020-WEPB15
[n]	F. P. Adams, E. R. Gaudette, and J. Ungrin, “Phase-Dependent Quadrupole Effects in On-Axis Coupled Linacs”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-34, pp. 392-394. 
[n]	R. C. Gentzlinger et al., “Design and Fabrication of SCRF Cavities for the APT Continuous-Wave Proton Linac”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT025, pp. XX-XX. 
[n]	J. L. Conradie et al., “Development of the NAC Accelerator Facilities”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper I-19, pp. 95-98. 
[n]	S. Levenson et al., “First demonstration of spin-polarized electrons from gallium nitride photocathodes”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1335-1338. doi:10.18429/JACoW-IPAC2023-TUODB3
[n]	K. J. Suthar, M. White, G. K. Mistri, A. K. Suthar, and S. K. Suthar, “Design and Development of AI Augmented Robot for Surveillance of High Radiation Facilities”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 192. doi:10.18429/JACoW-MEDSI2020-TUPC08
[n]	C. A. Mussolini, P. Burrows, N. Charitonidis, Y. Nagai, and E. D. Zimmerman, “Design of a Very Low Energy Beamline for NA61/SHINE”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1741-1744. doi:10.18429/JACoW-IPAC2022-WEPOST023
[n]	T. Toyama et al., “New Design of a Tapered-Coupler BPM Toward Simpler Geometry and Flatter Frequency Response”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 237-239. doi:10.18429/JACoW-IBIC2017-TUPCF13
[n]	A. V. Elzhov et al., “30 GHz Test Facility for Experimental Study of Accelerating Structure Damage due to the Pulse Heating”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE113, pp. 2311-2313. 
[n]	M. C. Lampel, J. M. J. Madey, and R. J. Burke, “First Order Design Study of an Accelerator Beamline for the PEARL FEL”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4015, pp. 797-799. 
[n]	D. L. Judd, “Session I Introductory Comments”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A02, pp. 4-6. 
[n]	S. Nagaitsev et al., “Space Charge Effects and Intensity Limits of Electron-Cooled Bunched Beams”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAP22, pp. 2937-2939. 
[n]	A. Burov, G. Lamanna, A. Pisent, L. Tecchio, and V. Variale, “Cooled Beam Instabilities driven by a Ring Periodicity Perturbation”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP052G, pp. 1057-1059. 
[n]	B. G. Chidley and J. G. Bayly, “Drift Tube Adjustment in an Evacuated Alvarez Linac”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper K-6, pp. 1133-1140. 
[n]	M. A. Drury et al., “Acceptance Testing of the First Group of LCLS II Cryomodules at Jefferson Lab”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3965-3967. doi:10.18429/JACoW-IPAC2018-THPAL137
[n]	J.-P. Jensen and S. Celik, “Investigation into the Air Conditioning of Long Undulator Sections in Tunnels”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI053, pp. 2682-2684. 
[n]	N. Solyak et al., “Performance of the First LCLS-II Cryomodules: Issues and Solutions”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 34-37. doi:10.18429/JACoW-IPAC2018-MOZGBD3
[n]	B. Higuera Gonzalez, T. Overton, Y. Saveliev, T. Pacey, and G. Xia, “Detailed simulation study of wakefield induced beam dynamics in the dielectric dechirper at CLARA”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2210-2213. doi:10.18429/JACoW-IPAC2024-WEPG14
[n]	Y. Tang et al., “NSLS Control System Upgrade Status”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1852-1855. 
[n]	D. A. Bizzozero, J. A. Ellison, and R. L. Warnock, “Modeling CSR in a Vacuum Chamber by Partial Fourier Analysis and the Discontinuous Galerkin Method”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP023, pp. 419-424. 
[n]	K. I. Tiedtke et al., “Online Photon Beam Position and Intensity Monitoring at FLASH”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH065, pp. XX-XX. 
[n]	J. Tang, S. Fu, and L. Ma, “High Intensity Aspects of the CSNS Proton Accelerators”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOIC02, pp. 38-42. 
[n]	N. Majernik et al., “Demonstration FELs Using UC-XFEL Technologies at the SAMURAI Laboratory”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1592-1595. doi:10.18429/JACoW-IPAC2021-TUPAB092
[n]	J. N. Weaver, “Controls for Operating and Processing the MIT-LNS Linac”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 576-580. 
[n]	H. Cortey, “The Laser MegaJoule Facility Status Report”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 989-993. doi:10.18429/JACoW-ICALEPCS2021-FRAL01
[n]	D. H. An et al., “Beam Simulation of SQQ Injection System in KIRAMS-30 Cyclotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH080, pp. 2107-2109. 
[n]	C. Serrano et al., “Design and Implementation of the LLRF System for LCLS-II”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1969-1974. doi:10.18429/JACoW-ICALEPCS2017-THSH202
[n]	V. Commichau et al., “The Slow Control System for the Alpha Magnetic Spectrometer (AMS-02) on the International Space Station”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP523, pp. XX-XX. 
[n]	T. Zwart et al., “A Spin Control System for the South Hall Ring at the Bates Linear Accelerator Center”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA31, pp. 600-602. 
[n]	J. Aggus, D. Edwards, H. J. Halama, and J. Herrera, “Factors Determining the Choice of the Beam Tuber Material and the Vacuum Chamber Design for a Superconducting High Energy Storage Accelerator”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4042-4045. 
[n]	N. Gelfand et al., “US-LHC IR Magnet Error Analysis and Compensation”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP11C, pp. 380-384. 
[n]	Y. C. Xu, H. Hao, D. H. He, and X. Q. Wang, “Study of MOSFET Solid-State Modulator for Fast Kicker”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP097, pp. 1775-1777. 
[n]	K. C. Harkay et al., “Generation of Short X-Ray Pulses Using Crab Cavities at the Advanced Photon Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOAB009, pp. 668-670. 
[n]	E. F. Parker, N. Q. Sesol, and R. E. Timm, “Operating Results and Improvements on the Zero Gradient Synchrotron (ZGS) Polarized Proton Ion Source”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1718-1722. 
[n]	S. O. Brauer et al., “Design and Testing of a High Power, Ultra-High Vacuum, Dual-Directional Coupler for the Advanced Photon Source (APS) Linear Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPE09, pp. 2020-2022. 
[n]	S. J. Black and G. Spalek, “Calculation of Mechanical Vibration Frequencies of Stiffened Superconducting Cavities”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-40, pp. 719-721. 
[n]	F. Liu et al., “Development of an ultrahigh dose rate radiation platform for X-ray FLASH radiotherapy research”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2549-2552. doi:10.18429/JACoW-IPAC2023-TUPM135
[n]	M. W. Poole, J. N. Corlett, J. S. MacKay, and V. P. Suller, “Beam Instability Characteristics of the Daresbury SRS”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 830-833. 
[n]	R. Mitchell, K. Matsumoto, G. Ciovati, K. Davis, K. Macha, and R. Sundelin, “Lorentz Force Detuning Analysis of the Spallation Neutron Source (SNS) Accelerating Cavities”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper SA010, pp. XX-XX. 
[n]	Y. Yang et al., “Digital LLRF System Development and Implementation at the APS Linac”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 792-794. doi:10.18429/JACoW-LINAC2022-THPOPA23
[n]	A. Smirnov et al., “Ordered Ion Beam in Storage Rings”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT094, pp. 2715-2717. 
[n]	C. Rubbia, N. Fietier, and P. Mandrillon, “A High Intensity Accelerator for Driving the Energy Amplified for Nuclear Energy Production”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 270-273. 
[n]	P. Michelato, A. Di Bona, C. Pagani, D. Sertore, and S. Valeri, “R & D Activity on High QE Alkali Photocathodes for RF Guns”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPC23, pp. 1049-1051. 
[n]	H. W. Zhao et al., “Commissioning of IMP 14.5 GHz ECR Ion Source”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper F-06, pp. 417-419. 
[n]	T. Hiatt et al., “Cryogenic Testing of the RF Input Waveguide for the CEBAF Upgrade Cryomodule”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH158, pp. 1155-1157. 
[n]	R. M. Lill et al., “Design and Performance of the LCLS Cavity BPM System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN111, pp. 4366-4368. 
[n]	G. W. Wang et al., “The construction of the RF system of BEPC II”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP44, pp. XX-XX. 
[n]	A. Hofmann and K. W. Robinson, “Measurement of Cross Section of a High-Energy Electron Beam by Means of the X-Ray Portion of the Synchrotron Radiation”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 937-939. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search