Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. W. Staples, S. M. Lidia, and S. P. Virostek, “Engineering Design of the LUX Photoinjector”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF069, pp. 473-475.
[n] K. Hirosawa et al., “Development of a Longitudinal Feedback System for Coupled Bunch Instabilities Caused by the Accelerating Mode at Superkekb”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3989-3991. doi:10.18429/JACoW-IPAC2017-THPAB115
[n] R. Haseitl, C. A. Andre, F. Becker, and P. Forck, “ProfileView - A Data Acquisition System for Beam Induced Fluorescence Monitors”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD42, pp. 134-136.
[n] Y. Kim, J. Y. Huang, M. Kwon, and I. S. Ko, “Status of Longitudinal Feedback System for the PLS Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA6, pp. 1076-1078.
[n] G. R. Lambertson, K.-J. Kim, and F. V. Voelker, “The Slotted Coax as a Beam Electrode”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2158-2161.
[n] J. B. Kim, I. S. Ko, H. J. Lee, and H. Suk, “Characteristics of Pulse Compression in Laser Pulse Amplification by Stimulated Raman Backscattering”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG047, pp. 2984-2986.
[n] T. Morishita, H. Asano, K. Hasegawa, M. Ikegami, and A. Ueno, “The Precise Survey and the Alignment Results of the J-PARC Linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN059, pp. 1520-1522.
[n] M. A. G. Johansson and R. Nietubyc, “MAX IV and Solaris Linac Magnets Production Series Measurement Results”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 79-81. doi:10.18429/JACoW-NAPAC2016-MOPOB06
[n] P. Elleaume and J. Chavanne, “Latest Developments on Insertion Devices”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUYFI02, pp. 969-973.
[n] J. N. Corlett, C. Kim, and G. R. Lambertson, “Observation and Calculation of Trapped Modes Near Cut-off in the ALS Bellows-shield”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP079G, pp. 1084-1086.
[n] M. Yoshimoto, H. Harada, M. Kinsho, and K. Okabe, “Beam Halo Measurement Using a Combination of a Wire Scanner Type Beam Scraper and Some Beam Loss Monitors in J-PARC 3-GeV RCS”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOPAB44, pp. 143-147.
[n] M. A. Clarke-Gayther, “The Development of a Slow-Wave Chopper Structure for Next Generation High Power Proton Drivers”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP063, pp. 1690-1692.
[n] S. A. Pande, C. Christou, P. Gu, and G. Burt, “Multipactor Study in the Coupler Region of the Diamond SCRF Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 405-408. doi:10.18429/JACoW-SRF2017-TUPB010
[n] N. I. Balalykin, C. Boehme, O. I. Brovko, V. F. Bykovsky, J. Dietrich, and V. Kamerdzhiev, “DEVELOPMENT OF BEAM POSITION AND PROFILE MONITOR”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHP42, pp. XX-XX.
[n] T. Roser, “RHIC Operational Status”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOAA004, pp. 358-362.
[n] H. Deruyter et al., “High Power 2 MeV Linear Accelerator Design Characteristics”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP119G, pp. 813-815.
[n] P. K. Saha et al., “Systematic Beam Loss Study due to the Foil Scattering at the 3-GeV RCS of J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB018, pp. 3921-3923.
[n] L. O. Dallin, “Operating Results of the Electron Ring of Saskatchewan (EROS)”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 22-27.
[n] S. Kato et al., “Injection Painting Improvements in the J-PARC RCS”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 299-303. doi:10.18429/JACoW-HB2016-TUPM5X01
[n] X. Zhou, Y. Ogawa, M. Yoshida, and R. Zhang, “The Developing of the Beam Injection Section with Laser Source and S-Band Electron RF Gun for SuperKEKB Project”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 50-53. doi:10.18429/JACoW-LINAC2018-MOPO007
[n] A. Krasnykh, “IREN Status: New Electron Linac Driven Intense Resonance Neutron Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAC01, pp. 134-136.
[n] Y. Ohnishi, “Report on SuperKEKB Phase 2 Commissioning”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1-5. doi:10.18429/JACoW-IPAC2018-MOXGB1
[n] S. Koscielniak, S. Hancock, and M. Lindroos, “Soliton-like Longitudinal Holes in Debunched Beams Perpetuated by Space-Charge Forces”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH052, pp. 2967-2969.
[n] D. Trbojevic et al., “Experimental Set-up to Measure Coherent Bremsstrahlung and Beam Profiles in RHIC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI076, pp. 1986-1988.
[n] D. J. Harding and A. Riddiford, “Automatic Steering Corrections to Minimize Injection Oscillations in the Fermilab Antiproton Source Rings”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1663-1666.
[n] M. J. Sigrist, L. O. Dallin, and W. A. Wurtz, “Super-Conducting Wigglers and the Effect on Injection Efficiency”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP232, pp. 1259-1261.
[n] K. Nakanishi, Y. Funakoshi, and M. Tobiyama, “Beam Behavior due to Crab Cavities Break down”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC022, pp. 2938-2940.
[n] R. Eichhorn, U. Ratzinger, and C. Peschke, “Superconducting CH-Cavities for Low- and Medium Beta Ion and Proton Accelerators”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper TL006, pp. XX-XX.
[n] J. W. Wang and G. A. Loew, “RF Breakdown Studies in Copper Electron Linac Structures”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1137-1140.
[n] I. Nesmiyan and C. Peschke, “Cooling of Secondary Beams”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper WEBO05, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- J. W. Staples, S. M. Lidia, and S. P. Virostek, “Engineering Design of the LUX Photoinjector”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF069, pp. 473-475.
- K. Hirosawa et al., “Development of a Longitudinal Feedback System for Coupled Bunch Instabilities Caused by the Accelerating Mode at Superkekb”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3989-3991.
- R. Haseitl, C. A. Andre, F. Becker, and P. Forck, “ProfileView - A Data Acquisition System for Beam Induced Fluorescence Monitors”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper MOPD42, pp. 134-136.
- Y. Kim, J. Y. Huang, M. Kwon, and I. S. Ko, “Status of Longitudinal Feedback System for the PLS Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA6, pp. 1076-1078.
- G. R. Lambertson, K.-J. Kim, and F. V. Voelker, “The Slotted Coax as a Beam Electrode”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2158-2161.
- J. B. Kim, I. S. Ko, H. J. Lee, and H. Suk, “Characteristics of Pulse Compression in Laser Pulse Amplification by Stimulated Raman Backscattering”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAG047, pp. 2984-2986.
- T. Morishita, H. Asano, K. Hasegawa, M. Ikegami, and A. Ueno, “The Precise Survey and the Alignment Results of the J-PARC Linac”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN059, pp. 1520-1522.
- M. A. G. Johansson and R. Nietubyc, “MAX IV and Solaris Linac Magnets Production Series Measurement Results”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 79-81.
- P. Elleaume and J. Chavanne, “Latest Developments on Insertion Devices”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUYFI02, pp. 969-973.
- J. N. Corlett, C. Kim, and G. R. Lambertson, “Observation and Calculation of Trapped Modes Near Cut-off in the ALS Bellows-shield”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP079G, pp. 1084-1086.
- M. Yoshimoto, H. Harada, M. Kinsho, and K. Okabe, “Beam Halo Measurement Using a Combination of a Wire Scanner Type Beam Scraper and Some Beam Loss Monitors in J-PARC 3-GeV RCS”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper MOPAB44, pp. 143-147.
- M. A. Clarke-Gayther, “The Development of a Slow-Wave Chopper Structure for Next Generation High Power Proton Drivers”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP063, pp. 1690-1692.
- S. A. Pande, C. Christou, P. Gu, and G. Burt, “Multipactor Study in the Coupler Region of the Diamond SCRF Cavities”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 405-408.
- N. I. Balalykin, C. Boehme, O. I. Brovko, V. F. Bykovsky, J. Dietrich, and V. Kamerdzhiev, “DEVELOPMENT OF BEAM POSITION AND PROFILE MONITOR”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WEHP42, pp. XX-XX.
- T. Roser, “RHIC Operational Status”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOAA004, pp. 358-362.
- H. Deruyter et al., “High Power 2 MeV Linear Accelerator Design Characteristics”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP119G, pp. 813-815.
- P. K. Saha et al., “Systematic Beam Loss Study due to the Foil Scattering at the 3-GeV RCS of J-PARC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB018, pp. 3921-3923.
- L. O. Dallin, “Operating Results of the Electron Ring of Saskatchewan (EROS)”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 22-27.
- S. Kato et al., “Injection Painting Improvements in the J-PARC RCS”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 299-303.
- X. Zhou, Y. Ogawa, M. Yoshida, and R. Zhang, “The Developing of the Beam Injection Section with Laser Source and S-Band Electron RF Gun for SuperKEKB Project”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 50-53.
- A. Krasnykh, “IREN Status: New Electron Linac Driven Intense Resonance Neutron Source”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAC01, pp. 134-136.
- Y. Ohnishi, “Report on SuperKEKB Phase 2 Commissioning”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1-5.
- S. Koscielniak, S. Hancock, and M. Lindroos, “Soliton-like Longitudinal Holes in Debunched Beams Perpetuated by Space-Charge Forces”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH052, pp. 2967-2969.
- D. Trbojevic et al., “Experimental Set-up to Measure Coherent Bremsstrahlung and Beam Profiles in RHIC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI076, pp. 1986-1988.
- D. J. Harding and A. Riddiford, “Automatic Steering Corrections to Minimize Injection Oscillations in the Fermilab Antiproton Source Rings”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1663-1666.
- M. J. Sigrist, L. O. Dallin, and W. A. Wurtz, “Super-Conducting Wigglers and the Effect on Injection Efficiency”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP232, pp. 1259-1261.
- K. Nakanishi, Y. Funakoshi, and M. Tobiyama, “Beam Behavior due to Crab Cavities Break down”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC022, pp. 2938-2940.
- R. Eichhorn, U. Ratzinger, and C. Peschke, “Superconducting CH-Cavities for Low- and Medium Beta Ion and Proton Accelerators”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper TL006, pp. XX-XX.
- J. W. Wang and G. A. Loew, “RF Breakdown Studies in Copper Electron Linac Structures”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1137-1140.
- I. Nesmiyan and C. Peschke, “Cooling of Secondary Beams”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper WEBO05, pp. XX-XX.
Back to search