JaCoW Logo

Reference Search

Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.

Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	E. D. Hudson, “Dual Arc Chamber Heavy Ion Source”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2702-2705. 
[n]	P. S. Yoon, C. L. Bohn, and W. Chou, “Simulations of Error-Induced Beam Degradation in Fermilab's Booster Synchrotron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT015, pp. 1458-1460. 
[n]	A. Mosnier, S. Chel, X. Hanus, A. Novokhatski, and G. Flynn, “Design of a Heavily Damped Superconducting Cavity for SOLEIL”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7V029, pp. 1709-1711. 
[n]	X. Z. Qiu, X. J. Wang, K. Batchelor, and I. Ben-Zvi, “Transition Radiation Electron Beam Diagnostic Study at ATF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB01, pp. 2530-2532. 
[n]	N. Liu, G. Liu, and T. Wang, “Low Energy Injection in a Compact Synchrotron Radiation Storage Ring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 568-570. 
[n]	W. Chou, “An 8-GeV Synchrotron-Based Proton Driver”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPE005, pp. 1551-1553. 
[n]	S. Scheloske and J. M. Mosthaf, “Overview of the Personnel Safety System at the Heidelberg Ion Therapy Facility”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP005, pp. 88-90. 
[n]	E. Tanke, M. Eshraqi, Y. I. Levinsen, A. Ponton, and S. Valero, “Status of and Plans for the Beam Dynamics Program DYNAC”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 80-82. doi:10.18429/JACoW-LINAC2016-MOPRC007
[n]	A. Burrill et al., “BERLinPro Booster Cavity Design, Fabrication and Test Plans”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP072, pp. 1019-1022. 
[n]	C. J. Liaw, J. M. Brennan, V. De Monte, K. Mernick, M. Myers, and J. E. Tuozzolo, “Robust Mechanical Design for RHIC Transverse Stochastic Cooling Pickup”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPHO08, pp. 1316-1318. 
[n]	V. Vogel et al., “Testing of the First Part of Series Production 10MW MBKs for the XFEL Project.”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP023, pp. 481-483. 
[n]	C. Belver-Aguilar and M. J. Barnes, “Review of Stripline Beam Impedance: Application to the Extraction Kicker for the CLIC Damping Rings”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3499-3502. doi:10.18429/JACoW-IPAC2017-WEPVA101
[n]	W. Decking and D. Robin, “Dynamic Aperture Measurements at the Advanced Light Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP45, pp. 1581-1583. 
[n]	R. V. Latham, “Field - Induced Electron Emission from Localized Sites on Extended - Area Electrodes”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-29, pp. XX-XX. 
[n]	B. M. Moftah, S. Aldelaijan, F. M. Alrumayan, F. Alzorkani, S. Devic, and M. Shehadeh, “Characterization of the CS30 Cyclotron at KFSH&RC for Radiotherapy Applications”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPSH008, pp. 400-402. 
[n]	G. Cuttone, “STATUS OF THE EXCYT PROJECT”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 21A6, pp. XX-XX. 
[n]	B. Beutner, “Emittance Measurement Procedures for the SwissFEL 250MeV Injector”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOPC36, pp. 111-114. 
[n]	Y. Nosochkov, K. J. Bertsche, and M. K. Sullivan, “Compensation of Detector Solenoid in SUPER-B”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP072, pp. 2267-2269. 
[n]	S. Biedron, A. L. Edelen, and S. V. Milton, “Intelligent Controls and Modeling for Particle Accelerators and Other Research and Industrial Infrastructures”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 156-159. doi:10.18429/JACoW-PCaPAC2018-THCB5
[n]	T. Hoffmann and H. Br?ñuning, “Upgraded Beam Instrumentation DAQ for GSI and FAIR: Overview and First Experiences”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1249. doi:10.18429/JACoW-ICALEPCS2019-WEPHA065
[n]	I. E. Campisi and Z. D. Farkas, “The Pulsed RF Superconductivity Program at SLAC”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-7, pp. XX-XX. 
[n]	V. Vogel, L. Butkowski, A. Cherepenko, S. Choroba, I. Harders, and J. Hartung, “Results of Testing of Multi-beam Klystrons for the European XFEL”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPLB04, pp. 448-450. 
[n]	J. Z. Xu, R. I. Farnsworth, and I. Vasserman, “FPGA Data Block FIFO for the APS ID Measurement System”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD44, pp. 79-80. 
[n]	G. Waters and R. Nussbaumer, “TRIUMF/ISAC EPICS IOCs Using a PC104 Platform”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP547, pp. XX-XX. 
[n]	F. M. Alrumayan, M. S. Shawoo, and M. Vora, “Status Report of the Cyclotrons C-30, CS-30 and RDS-111 at KFSHRC, Saudi Arabia”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT001, pp. 28-30. 
[n]	R. I. Farnsworth, J. P. Hammonds, B. R. Pausma, C. M. Suarez, A. Rhyder, and A. C. Starritt, “Performance Testing of EPICS User Interfaces - an Attempt to Compare the Performance of MEDM, EDM, CSS-BOY, and EPICS”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUMIB10, pp. 547-549. 
[n]	L. Calabretta et al., “The Progress of the EXCYT Facility at INFN-LNS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B01, pp. 2597-2599. 
[n]	H. Sako et al., “Relational database system for J-PARC LINAC and RCS”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_080. 
[n]	A. Meseck, G. H. Hoffstaetter, F. Loehl, and C. E. Mayes, “X-Ray FELs Based on ERL Facilities”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOPC06, pp. 111-114. 
[n]	D. J. Holder, F. E. Hannon, S. Khodyachykh, B. D. Muratori, and A. Oppelt, “A Phase Space Tomography Diagnostic for Pitz”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH039, pp. 1091-1093. 
[n]	P. N. Ostroumov, J. D. Fuerst, M. P. Kelly, B. Mustapha, J. A. Nolen, and K. W. Shepard, “Accelerators for the Advanced Exotic Beam Facility in the U. S.”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS005, pp. 1664-1666. 
[n]	W. Weingarten, “Electron Loading”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-30, pp. 551-582. 
[n]	Y. I. Levinsen, R. De Prisco, M. Eshraqi, R. Miyamoto, M. Munoz, and A. Ponton, “Beam Dynamics Challenges in the ESS Linac”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 315-318. doi:10.18429/JACoW-HB2016-TUAM3Y01
[n]	J. Seeman, Y. Cai, M. K. Sullivan, and U. Wienands, “PEP-II at 1.21034/cm2/s Luminosity”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOZAKI03, pp. 37-41. 
[n]	M. Drochner, L. Fleischhauer-Fuss, H. Kleines, M. Wagener, and S. van Waasen, “Neutron Scattering Instrument Control System Modernization - Front-End Hardware and Software Adaption Problems”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 233-235. doi:10.18429/JACoW-ICALEPCS2015-MOPGF058
[n]	T. Boltz et al., “Perturbation of Synchrotron Motion in the Micro-Bunching Instability”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 108-111. doi:10.18429/JACoW-IPAC2019-MOPGW018
[n]	N. Nakamura et al., “Beam Position Feedback Systems for the PF Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ23, pp. 2720-2722. 
[n]	M. K. Dey, A. Chakrabarti, and A. Dutta Gupta, “Design of Ultra-Light Superconducting Proton Cyclotron for Production of Isotopes for Medical Applications”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TH2PB01, pp. 446-450. 
[n]	M. A. K. Othman et al., “THz-Based Femtosecond MeV Electron Bunch Compression”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3766-3768. doi:10.18429/JACoW-IPAC2019-THPGW079
[n]	P. Grand, K. Batchelor, J. R. Powell, and M. Steinberg, “The Accelerator-Breeder, an Application of High-Energy Accelerators to Solving Our Energy Problems”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1043-1046. 
[n]	L. Farvacque and R. Nagaoka, “Calibration of Quadrupole Magnets via Response Matrix Fitting”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP02G, pp. 909-911. 
[n]	A. K. Chang, H. K. Kang, and R. S. Larsen, “Position and Intensity Monitoring System for the SPEAR Transport System at SLAC”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 624-631. 
[n]	H. Kleines et al., “The New TANGO-based Control and Data Acquisition of the Neutron Instrument DNS at FRM II”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 236-239. doi:10.18429/JACoW-ICALEPCS2015-MOPGF063
[n]	P. Kneisel, “Clean Work and its Consequences - Contamination Control Considerations”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-28, pp. XX-XX. 
[n]	J. Halbritter, “On RF Residual Losses in Superconducting Cavities”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-24, pp. XX-XX. 
[n]	K. Yamamoto, M. Kinsho, F. Noda, Y. Irie, and M. Shirakata, “Beam Collimator Design for the 3GeV Synchrotron of the JAERI-KEK Joint Project”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH305, pp. 3615-3617. 
[n]	A. Jackson et al., “ALS-N - A Candidate for a Next-Generation Synchrotron Light-Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6V006, pp. 778-780. 
[n]	L. Zhang, L. Farvacque, J. M. Filhol, and E. Plouviez, “E-Beam Stability Enhancement by Use of Damping Links for Magnet Girder Assemblies at the ESRF”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH073, pp. 2620-2622. 
[n]	S. Y. Zhao, M. Li, P. Li, J. Wang, D. Wu, and X. Yang, “Theoretical Analysis and Experimental Design of Terahertz Single-Pulse Picking based on Plasma Mirror”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2613-2615. doi:10.18429/JACoW-IPAC2019-WEPGW060
[n]	L. Wang et al., “Electron Cloud in the Collimator- and Injection- Region of the Spallation Neutron Source's Accumulator Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAP024, pp. 1865-1867. 
[n]	E. Tikhomolov, G. Waters, and R. Keitel, “EPICS Portable Channel Access Server for Multiple Windows Applications”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP574, pp. XX-XX. 
[n]	M. T. Lynch, S.-I. Kwon, A. H. Regan, and Y.-M. Wang, “Excess RF Power Required for RF Control of the Spallation Neutron Source (SNS) Linac, a Pulsed High-Intensity Superconducting Proton Accelerator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROAA010, pp. 503-505. 
[n]	C. H. Rivetta, J. D. Fox, T. Mastorides, D. Teytelman, and D. Van Winkle, “Modeling and Simulation of Longitudinal Dynamics for LER-HER PEP II Rings”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH101, pp. 3032-3034. 
[n]	H. Yonehara and T. Kasuga, “Beam Quality in Single Bunch Mode of UVSOR Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 924-926. 
[n]	M. Tanigaki, “Development and Current Status of KURAMA-II”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 170-172. doi:10.18429/JACoW-PCaPAC2018-THP05
[n]	C. Limborg and J. Sebek, “Collective Effects in SPEAR 3”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP41, pp. 2361-2363. 
[n]	X. Z. Qiu, X. J. Wang, K. Batchelor, and I. Ben-Zvi, “Conceptual design of a Charged Particle Beam Energy Spectrometer Utilizing Transition Radiation Grating”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAE09, pp. 2411-2413. 
[n]	H. Padamsee, “The Technology of Nb Production and Purification”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-21, pp. XX-XX. 
[n]	R. Nagaoka and L. Farvacque, “Analysis of Normal and Skew Quadrupole Errors at the ESRF”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH127, pp. 3534-3536. 
[n]	R. S. Larsen and H. A. Woods, “Position Monitoring Electronics for the Stanford Linear Accelerator”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 862-867. 
[n]	G. Arnolds-Mayer, “A15 Surfaces in Nb Cavities”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-35, pp. XX-XX. 
[n]	A. Baron and E. Haebel, “HOM Couplers for a 1mA Linac FEL Driver”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G17, pp. XX-XX. 
[n]	G. Cojocaru and J. C. Lofvendahl, “Operational Experience at the Intensity Limit in Compact Cyclotrons”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TH1PB01, pp. 432-436. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search