Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Caracappa, C. Danneil, A. J. Della Penna, R. P. Fliller, D. Padrazo, and O. Singh, “A PPS Compliant Stored Beam Current Monitor at NSLS-II”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 426-429. doi:10.18429/JACoW-IBIC2016-TUPG38
[n] S. Ogawa et al., “Beam storage monitor to achieve 3-D spiral injection in muon g-2/EDM experiment at J-PARC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2922-2924. doi:10.18429/JACoW-IPAC2024-THAD1
[n] B. Laune, “Status Report on the AGOR Superconducting Cyclotron”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 43-46.
[n] J. Roberts et al., “First Results From Beam Tests of the CLIC Drive Beam Phase Feedforward Prototype at CTF3”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1139-1142. doi:10.18429/JACoW-IPAC2015-MOPWI001
[n] V. L. Serov, A. N. Drugakov, A. Feschenko, A. I. Kvasha, and A. N. Naboka, “Investigation of INR DTL RF System Operation at 100 Hz Repetition Rate”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper MOPPA023, pp. 296-298.
[n] T.-Y. Lee, “A Possible Emittance Reduction Scheme for PLSII”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1226-1227. doi:10.18429/JACoW-NAPAC2016-THPOA61
[n] J. Speed, A. Avaroglu, and I. Rodriguez, “Practical design and manufacturing of the new ISIS MEBT chopper”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3532-3535. doi:10.18429/JACoW-IPAC2024-THPR19
[n] R. Russo and S. Sgobba, “Influence of Coating Temperature on Niobium Films”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D11, pp. 890-898.
[n] C. Maccani, “Simulated beam performance of the TWOCRYST proof of principle experiment at the LHC”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 631-634. doi:10.18429/JACoW-IPAC2025-MOPS019
[n] J. Roberts et al., “Demonstration of CLIC Level Phase Stability using a High Bandwidth, Low Latency Drive Beam Phase Feedforward System at the CLIC Test Facility CTF3”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2673-2676. doi:10.18429/JACoW-IPAC2016-WEPOR006
[n] A. H. Lumpkin, D. R. Edstrom, and J. Ruan, “Initial Demonstration of 9-MHz Framing Camera Rates on the FAST Drive Laser Pulse Trains”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 333-336. doi:10.18429/JACoW-NAPAC2016-TUPOA25
[n] P. C. Chiu et al., “TLS Booster Measurement and Observation by New BPM Electronics”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA044, pp. 768-770.
[n] Y. Kojima, “Recent Results on Superconducting Cavities at KEK”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-5, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Caracappa, C. Danneil, A. J. Della Penna, R. P. Fliller, D. Padrazo, and O. Singh, “A PPS Compliant Stored Beam Current Monitor at NSLS-II”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 426-429.
- S. Ogawa et al., “Beam storage monitor to achieve 3-D spiral injection in muon g-2/EDM experiment at J-PARC”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THAD1, pp. 2922-2924.
- B. Laune, “Status Report on the AGOR Superconducting Cyclotron”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 43-46.
- J. Roberts et al., “First Results From Beam Tests of the CLIC Drive Beam Phase Feedforward Prototype at CTF3”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1139-1142.
- V. L. Serov, A. N. Drugakov, A. Feschenko, A. I. Kvasha, and A. N. Naboka, “Investigation of INR DTL RF System Operation at 100 Hz Repetition Rate”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper MOPPA023, pp. 296-298.
- T.-Y. Lee, “A Possible Emittance Reduction Scheme for PLSII”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1226-1227.
- J. Speed, A. Avaroglu, and I. Rodriguez, “Practical design and manufacturing of the new ISIS MEBT chopper”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR19, pp. 3532-3535.
- R. Russo and S. Sgobba, “Influence of Coating Temperature on Niobium Films”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D11, pp. 890-898.
- C. Maccani, “Simulated beam performance of the TWOCRYST proof of principle experiment at the LHC”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS019, pp. 631-634.
- J. Roberts et al., “Demonstration of CLIC Level Phase Stability using a High Bandwidth, Low Latency Drive Beam Phase Feedforward System at the CLIC Test Facility CTF3”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2673-2676.
- A. H. Lumpkin, D. R. Edstrom, and J. Ruan, “Initial Demonstration of 9-MHz Framing Camera Rates on the FAST Drive Laser Pulse Trains”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 333-336.
- P. C. Chiu et al., “TLS Booster Measurement and Observation by New BPM Electronics”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA044, pp. 768-770.
- Y. Kojima, “Recent Results on Superconducting Cavities at KEK”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-5, pp. XX-XX.
Back to search
